CHST - ChemData V3 || 100% Certified Answers.
The least likely reason accidents generally occur is a result of: correct answers Lack of a
safety policy or program.
The term "cradle to grave" is associated with what legislative act? correct answers RCRA
Community Right-to-know is associated with what legislative act? correct answers SARA
Title III
The asbestos hazard emergency response act: correct answers Is Title II Of TSCA.
SPCC Plans apply to which type(s) of facilities? correct answers Petroleum storage facilities,
with certain ecseptions
The "cradle to grave" aspects of the RCRA program refer to: correct answers Regulation of
hazardous wastes from the point of generation through their ultimate disposal.
Anticipating and controlling hazards are best accomplished: correct answers At all design
stages of an activity.
Contract employers have specific responsibilities under the OSHA Process Safety Standard.
Among these responsibilities are the following with the exception of: correct answers
Conduct process hazard analysis of contract work.
There are four classes of fires. Class D fires are: correct answers Fires involving combustible
metals such as magnesium and sodium.
Construction scrap and waste materials must be removed from the immediate work area as
work progresses. Work is progressing on the 4th floor of a new structure. Waste materials can
be best removed by: correct answers Providing an enclosed chute to allow wastes to be
dropped to an appropriate waste dumpster at ground level.
A typical three-wire electrical circuit is color-coded. Typical color coding is which of the
following? correct answers The black wire is the current carrying wire, the neutral wire is
white and the ground is green.
Electrical equipment will continue to operate if: correct answers The ground wire is
disconnected.
Guarding of energized electrical parts is the primary method of protecting workers from
electrical hazards. Guarding is required for. correct answers Energized parts carrying 50 volts
or greater.
The leading causes of employee injuries on scaffolds are which of the following? correct
answers Planking and support failure
Slipping
Impact of falling objects
The least likely reason accidents generally occur is a result of: correct answers Lack of a
safety policy or program.
The term "cradle to grave" is associated with what legislative act? correct answers RCRA
Community Right-to-know is associated with what legislative act? correct answers SARA
Title III
The asbestos hazard emergency response act: correct answers Is Title II Of TSCA.
SPCC Plans apply to which type(s) of facilities? correct answers Petroleum storage facilities,
with certain ecseptions
The "cradle to grave" aspects of the RCRA program refer to: correct answers Regulation of
hazardous wastes from the point of generation through their ultimate disposal.
Anticipating and controlling hazards are best accomplished: correct answers At all design
stages of an activity.
Contract employers have specific responsibilities under the OSHA Process Safety Standard.
Among these responsibilities are the following with the exception of: correct answers
Conduct process hazard analysis of contract work.
There are four classes of fires. Class D fires are: correct answers Fires involving combustible
metals such as magnesium and sodium.
Construction scrap and waste materials must be removed from the immediate work area as
work progresses. Work is progressing on the 4th floor of a new structure. Waste materials can
be best removed by: correct answers Providing an enclosed chute to allow wastes to be
dropped to an appropriate waste dumpster at ground level.
A typical three-wire electrical circuit is color-coded. Typical color coding is which of the
following? correct answers The black wire is the current carrying wire, the neutral wire is
white and the ground is green.
Electrical equipment will continue to operate if: correct answers The ground wire is
disconnected.
Guarding of energized electrical parts is the primary method of protecting workers from
electrical hazards. Guarding is required for. correct answers Energized parts carrying 50 volts
or greater.
The leading causes of employee injuries on scaffolds are which of the following? correct
answers Planking and support failure
Slipping
Impact of falling objects
