1|Page
NEIEP 200 Final essential elevator industry EXAM
LATEST VERSION WITH QUESTIONS AND VERIFIED
ANSWERS!!!
Which lay of wire rope has the strand wires in line with the
rope axis? - Answer-Regular Lay
At what speed should the counterweight safeties be set to
trip? - Answer-Up to 10% higher than the car governor
Which type of safety uses an oil buffer between the car
and safety planks? - Answer-Type C
What is the purpose of the terminal motion switch? -
Answer-slow down and stop the car automatically at or
near the top or bottom landing
If you have a 3500 lb. car rated at 4000 lbs. capacity, how
much should the counterweight assembly weigh for a
normal 40% installation? - Answer-5100 lbs.
When the pit directional limit switch is actuated, the normal
circuits will allow the car to run - Answer-Up
, 2|Page
_______should not be disassembled in the field. - Answer-
Oil Buffers
The loss of traction between the hoist ropes and the
machine driver when the counterweight lands on its buffer
avoids... - Answer-The elevator car being pulled into the
over head.
Refer to Table 1. With a safety factor of 5, what is the
breaking strength for 1 1/8" nylon rope? - Answer-52,000
lbs.
Which of the following applies to rope usage? - Answer-
Prevent manila rope from unraveling by using whipping.
What does the designation 3/8" 6 X 30 improved plow
steel mean? - Answer-It is a high strength cable with 6
strands composed of 30 wires per strand?
When using Crosby clips, which of the following
statements is correct? - Answer-To determine the correct
minimum spacing multiply the rope diameter times 6.
NEIEP 200 Final essential elevator industry EXAM
LATEST VERSION WITH QUESTIONS AND VERIFIED
ANSWERS!!!
Which lay of wire rope has the strand wires in line with the
rope axis? - Answer-Regular Lay
At what speed should the counterweight safeties be set to
trip? - Answer-Up to 10% higher than the car governor
Which type of safety uses an oil buffer between the car
and safety planks? - Answer-Type C
What is the purpose of the terminal motion switch? -
Answer-slow down and stop the car automatically at or
near the top or bottom landing
If you have a 3500 lb. car rated at 4000 lbs. capacity, how
much should the counterweight assembly weigh for a
normal 40% installation? - Answer-5100 lbs.
When the pit directional limit switch is actuated, the normal
circuits will allow the car to run - Answer-Up
, 2|Page
_______should not be disassembled in the field. - Answer-
Oil Buffers
The loss of traction between the hoist ropes and the
machine driver when the counterweight lands on its buffer
avoids... - Answer-The elevator car being pulled into the
over head.
Refer to Table 1. With a safety factor of 5, what is the
breaking strength for 1 1/8" nylon rope? - Answer-52,000
lbs.
Which of the following applies to rope usage? - Answer-
Prevent manila rope from unraveling by using whipping.
What does the designation 3/8" 6 X 30 improved plow
steel mean? - Answer-It is a high strength cable with 6
strands composed of 30 wires per strand?
When using Crosby clips, which of the following
statements is correct? - Answer-To determine the correct
minimum spacing multiply the rope diameter times 6.
