UPDATED QUESTIONS AND CORRECT
ANSWERS
What is the most important single factor to the safe operation of the forklifts? - CORRECT
ANSWERS✅✅THE OPERATOR
Many accidents happen because the operator does which of the following? - CORRECT
ANSWERS✅✅a) uses a forklift with a known defect
b) travels an unsafe route
c) carries unsafe loads
d) uses unsafe operating techniques
When is it safe to operate the forklift from a place other than the operator's seat? - CORRECT
ANSWERS✅✅NEVER
Workers and bystanders within the danger area of the forklift should be considered the
responsibility of? - CORRECT ANSWERS✅✅THE OPERATOR
Which of the following are essential for safe operation? - CORRECT ANSWERS✅✅a)
smooth starts
b) smooth stops
c) smooth turns
The operator "feathers" the controls when he wants to? - CORRECT ANSWERS✅✅MOVE
THE LOAD SLOWLY
If you find a fault or suspect an unsafe condition while inspecting or operating a forklift you
should? - CORRECT ANSWERS✅✅TELL YOUR SUPERVISOR
If bystanders or a fellow worker are in danger from a raised load, you should? - CORRECT
ANSWERS✅✅SOUND YOUR HORN OR ASK THEM TO MOVE
, Which of the following affect forklift safety? - CORRECT ANSWERS✅✅a) Leverage
b) Center of gravity
c) Momentum
The pivot point of a forklift is? - CORRECT ANSWERS✅✅THE FRONT AXLE
The teeter totter is a simple example of? - CORRECT ANSWERS✅✅LEVERAGE
Safe load limits for a particular forklift ... - CORRECT ANSWERS✅✅SHOULD NEVER
BE EXCEEDED
When a forklift picks up a load on the forks... - CORRECT ANSWERS✅✅THE CENTER
OF GRAVITY OF THE FORKLIFT MOVES FORWARD
Forward tipping will occur unless the forklift's center of gravity is? - CORRECT
ANSWERS✅✅On The Opposite Side Of The Front Axle
Momentum is a force created by? - CORRECT ANSWERS✅✅a) Starting
b) Stopping
c) Turning
Which of the following has or have an Effect on the amount of stability a forklift has? -
CORRECT ANSWERS✅✅a) Weight distribution
b) Axle length
c) Wheel base
As the load of a forklift is raised, which of the following dangers increase? - CORRECT
ANSWERS✅✅a) Tipping
b) Loss of steering
c) The effects of momentum