1|Page
WGU D469 OBJECTIVE ASSESSMENT FINAL EXAM NEWEST
2025/2026 ACTUAL EXAM WITH COMPLETE QUESTIONS AND
CORRECT DETAILED ANSWERS (100% VERIFIED ANSWERS)
|ALREADY GRADED A+| ||PROFESSOR VERIFIED||
1. To find the total number of treads in a stair run, there is always
one tread _____________ the number of risers, as the floor levels
at each stair end are not counted as treads.
a. fewer than
b. equal to
c. more than
d. half the sum of
e. twice - ANSWER-a. fewer than
2. Basic sizes, arrangements, materials, and overall details are
drawn by the designer. Many are redrawn in more detail and
submitted back to the designer as ____________________ done
by one of the subcontractors, such as the cabinetmaker or glazing
subcontractor.
a. "bid documents"
b. "working drawings"
c. "field drawings"
,2|Page
d. "assembly drawings"
e. "shop drawings" - ANSWER-e. "shop drawings"
3. A window which is hinged at the bottom and can swing in or out
is called a ____________ window.
a. casement
b. awning
c. hopper
d. jalousie
e. double hung - ANSWER-c. hopper
4. Fire doors must be ___________________ and have proper
latching devices to contain the possible spread of fire, smoke, and
toxic gases.
a. easily opened
b. with no glass
c. non-rated
d. equipped with an alarm
e. self-closing - ANSWER-e. self-closing
,3|Page
5. The ___________ lock is named for the complete assembly
that is installed in a cut-out door recess, thus making it one of the
most secure locking units.
a. combination
b. rolling lock
c. hinged
d. rabbet
e. mortise - ANSWER-e. mortise
6. Door hand is determined by standing on the _____________ of
the building or the side from which security is desired.
a. interior
b. exterior
c. back
d. rear
e. passage way - ANSWER-b. exterior
, 4|Page
7. A window which is hinged at the top and can swing in or out is
called a _____________ window.
a. hopper
b. jalousie
c. casement
d. awning
e. pivot - ANSWER-d. awning
8. Similar to doors and cabinetry, the _________ of the window
size is called out first, followed by the dimension in the other
direction.
a. width
b. area
c. clear opening
d. height
e. thickness - ANSWER-a. width
WGU D469 OBJECTIVE ASSESSMENT FINAL EXAM NEWEST
2025/2026 ACTUAL EXAM WITH COMPLETE QUESTIONS AND
CORRECT DETAILED ANSWERS (100% VERIFIED ANSWERS)
|ALREADY GRADED A+| ||PROFESSOR VERIFIED||
1. To find the total number of treads in a stair run, there is always
one tread _____________ the number of risers, as the floor levels
at each stair end are not counted as treads.
a. fewer than
b. equal to
c. more than
d. half the sum of
e. twice - ANSWER-a. fewer than
2. Basic sizes, arrangements, materials, and overall details are
drawn by the designer. Many are redrawn in more detail and
submitted back to the designer as ____________________ done
by one of the subcontractors, such as the cabinetmaker or glazing
subcontractor.
a. "bid documents"
b. "working drawings"
c. "field drawings"
,2|Page
d. "assembly drawings"
e. "shop drawings" - ANSWER-e. "shop drawings"
3. A window which is hinged at the bottom and can swing in or out
is called a ____________ window.
a. casement
b. awning
c. hopper
d. jalousie
e. double hung - ANSWER-c. hopper
4. Fire doors must be ___________________ and have proper
latching devices to contain the possible spread of fire, smoke, and
toxic gases.
a. easily opened
b. with no glass
c. non-rated
d. equipped with an alarm
e. self-closing - ANSWER-e. self-closing
,3|Page
5. The ___________ lock is named for the complete assembly
that is installed in a cut-out door recess, thus making it one of the
most secure locking units.
a. combination
b. rolling lock
c. hinged
d. rabbet
e. mortise - ANSWER-e. mortise
6. Door hand is determined by standing on the _____________ of
the building or the side from which security is desired.
a. interior
b. exterior
c. back
d. rear
e. passage way - ANSWER-b. exterior
, 4|Page
7. A window which is hinged at the top and can swing in or out is
called a _____________ window.
a. hopper
b. jalousie
c. casement
d. awning
e. pivot - ANSWER-d. awning
8. Similar to doors and cabinetry, the _________ of the window
size is called out first, followed by the dimension in the other
direction.
a. width
b. area
c. clear opening
d. height
e. thickness - ANSWER-a. width
