ASSE 6005 LATEST
CERTIFICATION
EXAM
Brazing procedures and brazer performance shall be qualified in
accordance with ______ - ANSWERS-ASME Section IX
Melting temperature for brazing alloys - ANSWERS-1000
Filler metal for copper-to-copper joints - ANSWERS-BCuP series
Pressure where outlets need to be either D.I.S.S. Or designed to relief
pressure before removal of adapter - ANSWERS-80 psi
Maximal interval for pipe labels - ANSWERS-20 ft
Minimum burst pressure for flex hose and connectors - ANSWERS-
1000 psi
Pipe types for medical-surgical vacuum systems - ANSWERS-ASTM
B88, ASTM B819, ASTM B280, Stainless Steel
END OF
PAGE 1
, ASSE 6005 LATEST
CERTIFICATION
EXAM
Used to assure all ambient air has been removed from the pipeline prior
to brazing - ANSWERS-Oxygen Analyzer
Indicated on continuous tape or marker to identify buried pipeline -
ANSWERS-Specific Name
Minimum test pressure for initial pressure test - ANSWERS-150 psi
Minimum wall thickness for Category 3 vacuum system with plastic
piping - ANSWERS-Schedule 40
Hard-drawn, seamless copper tube for Category 3 positive pressure
gases - ANSWERS-ASTM B819
Allowable pressure relief valve materials - ANSWERS-Brass, Bronze,
Stainless Steel
Likely to cause major inury or death of patient or caregiver -
ANSWERS-Category 1
END OF
PAGE 2
CERTIFICATION
EXAM
Brazing procedures and brazer performance shall be qualified in
accordance with ______ - ANSWERS-ASME Section IX
Melting temperature for brazing alloys - ANSWERS-1000
Filler metal for copper-to-copper joints - ANSWERS-BCuP series
Pressure where outlets need to be either D.I.S.S. Or designed to relief
pressure before removal of adapter - ANSWERS-80 psi
Maximal interval for pipe labels - ANSWERS-20 ft
Minimum burst pressure for flex hose and connectors - ANSWERS-
1000 psi
Pipe types for medical-surgical vacuum systems - ANSWERS-ASTM
B88, ASTM B819, ASTM B280, Stainless Steel
END OF
PAGE 1
, ASSE 6005 LATEST
CERTIFICATION
EXAM
Used to assure all ambient air has been removed from the pipeline prior
to brazing - ANSWERS-Oxygen Analyzer
Indicated on continuous tape or marker to identify buried pipeline -
ANSWERS-Specific Name
Minimum test pressure for initial pressure test - ANSWERS-150 psi
Minimum wall thickness for Category 3 vacuum system with plastic
piping - ANSWERS-Schedule 40
Hard-drawn, seamless copper tube for Category 3 positive pressure
gases - ANSWERS-ASTM B819
Allowable pressure relief valve materials - ANSWERS-Brass, Bronze,
Stainless Steel
Likely to cause major inury or death of patient or caregiver -
ANSWERS-Category 1
END OF
PAGE 2
