NFPA 211 - JOURNEYMAN EXAM PRACTICE TEST 2025
QUESTIONS WITH 100% SOLVED ANSWERS.
The conduit conveying flue gas from the appliance to the chimney is called the
_______? Answer - Breeching. NFPA 211 3.3.15
A chimney cap is used to ________? Answer - Provide a protective covering for
the top of the chimney to prevent entry of rain, snow, animals and birds and to
prevent downdrafts.
_______________ is a structure containing one or more vertical or near
vertical passageways for conveying flue gases to the outside atmosphere.
Answer - A chimney. NFPA 211 3.3.28.1.1
What is the temperature restriction for a Factory-built, building heating
appliance-type chimney? Answer - 1000F NFPA 211 3.3.28.1.1
What is a heat exchanger intended to be installed in a chimney connector
between the appliance and the chimney to transfer heat from the flue gases
through metal to air or water? Answer - Chimney connector-type heat
reclaimer NFPA 211 3.3.31
What is an opening near the base of a chimney designed to allow access to the
flue for purposes of removal of ash soot and other matter that becomes
trapped called? Answer - Cleanout opening NFPA 211 3.3.45
, Constituents resulting from the combustion of a fuel with oxygen of the air
including the inert but excluding excess air. Answer - Combustion products.
NFPA 211 3.3.45
What is the name of the pipe that connects a fuel-burning appliance to a
chimney? Answer - Chimney connector. NFPA 211 3.3.47.1
What is the name of the pipe that connects a fuel-burning appliance to a gas
vent or a type L vent? Answer - Vent connector. NFPA 211 3.3.47.2
A chamber in which heat resulting directly from the combustion of fuel is
transferred through the walls of the chamber to air passing through is called a
_______? Answer - Heat exchanger NFPA 211 3.3.87
A self-contained heating appliance that is intended for the heating of a space in
which it is installed is known as a ______? Answer - Unit heater. NFPA 211
3.3.88.3
A fuel-burning appliance for heating water to a temperature not more than
200F is known as a _____________? Answer - Water heater. NFPA 211 3.3.88.4
What test is used to ascertain the tightness of a chimney and for detecting any
cracks in the masonry flue? Answer - Smoke test. NFPA 211 3.3.119
A fixed or removable ring tube or lining usually located in the hole where the
chimney connector or vent connector passes through a wall or enters a
chimney or vent is called a ? Answer - Thimble. NFPA 211 3.3.132
QUESTIONS WITH 100% SOLVED ANSWERS.
The conduit conveying flue gas from the appliance to the chimney is called the
_______? Answer - Breeching. NFPA 211 3.3.15
A chimney cap is used to ________? Answer - Provide a protective covering for
the top of the chimney to prevent entry of rain, snow, animals and birds and to
prevent downdrafts.
_______________ is a structure containing one or more vertical or near
vertical passageways for conveying flue gases to the outside atmosphere.
Answer - A chimney. NFPA 211 3.3.28.1.1
What is the temperature restriction for a Factory-built, building heating
appliance-type chimney? Answer - 1000F NFPA 211 3.3.28.1.1
What is a heat exchanger intended to be installed in a chimney connector
between the appliance and the chimney to transfer heat from the flue gases
through metal to air or water? Answer - Chimney connector-type heat
reclaimer NFPA 211 3.3.31
What is an opening near the base of a chimney designed to allow access to the
flue for purposes of removal of ash soot and other matter that becomes
trapped called? Answer - Cleanout opening NFPA 211 3.3.45
, Constituents resulting from the combustion of a fuel with oxygen of the air
including the inert but excluding excess air. Answer - Combustion products.
NFPA 211 3.3.45
What is the name of the pipe that connects a fuel-burning appliance to a
chimney? Answer - Chimney connector. NFPA 211 3.3.47.1
What is the name of the pipe that connects a fuel-burning appliance to a gas
vent or a type L vent? Answer - Vent connector. NFPA 211 3.3.47.2
A chamber in which heat resulting directly from the combustion of fuel is
transferred through the walls of the chamber to air passing through is called a
_______? Answer - Heat exchanger NFPA 211 3.3.87
A self-contained heating appliance that is intended for the heating of a space in
which it is installed is known as a ______? Answer - Unit heater. NFPA 211
3.3.88.3
A fuel-burning appliance for heating water to a temperature not more than
200F is known as a _____________? Answer - Water heater. NFPA 211 3.3.88.4
What test is used to ascertain the tightness of a chimney and for detecting any
cracks in the masonry flue? Answer - Smoke test. NFPA 211 3.3.119
A fixed or removable ring tube or lining usually located in the hole where the
chimney connector or vent connector passes through a wall or enters a
chimney or vent is called a ? Answer - Thimble. NFPA 211 3.3.132
