1|Pa ge
Food Protection Manager Certification Examination Newest
2025/2026 Complete Questions And Correct Detailed Answers
(Verified Answers) |Brand New Version!
When inspecting a regulator control nitrogen pad system on a large
storage tank and no
pressure is found what critical item besides a regulator should be
checked? - ANSWERS--air supply
What type of service should Teflon paste never be used on? -
ANSWERS--service oxygen lines. PTFE materials are not
recommended for service on oxygen lines due to their anaerobic
nature.
A What is the principle behind how a solenoid valve opens? -
ANSWERS--it consists of a valve body, a magnetic core attached to a
valve stem, and a solenoid coil that works of inductance.
Which of the following gasses should be used to purge tubing and
pipe after cleaning? - ANSWERS--nitrogen
,2|Pa ge
What is the final step in commissioning; what should be the final
step? - ANSWERS--gathering all the documentation
In reference to PID controller, reset relates to which variable? -
ANSWERS--reset or integral provides an output that is proportional
to the time integral of the input. Eliminates offset.
An employee deenergizes a piece of equipment by removing the
power plug from the outlet, if the employees continue to hold the
power plug once removed. The employee is said to have
what type of control over the energy potential? - ANSWERS--
exclusive control
The output of a thermocouple is expressed in what units? -
ANSWERS--milli volts (mV)
A differential pressure transmitter mounted on a non-vented tank is
used to measure the _______ of the vessel? - ANSWERS--level
When properly calibrated and installed the most accurate primary
flow element is the ________? - ANSWERS--venturi tubes
What is the primary disadvantage of a direct operated regulator? -
ANSWERS--non adjustable
, 3|Pa ge
What is the advantage of a pilot operated regulator? - ANSWERS--
The pilot regulator typically includes proportional band adjustments
for verifying the sensitivity.
A valve has linear characteristic when __________. - ANSWERS--flow
rate provided is proportional to the amount of value lift
What type of input signal does a valve actuator receive from a V/P
transducer? - ANSWERS--pneumatic signal
What does it mean to say that the controller is reverse acting? -
ANSWERS--decreases the output signal when the measured medium
increases
What does it mean to say that a controller is direct acting? -
ANSWERS--increases its output signal when the measure medium
increases
How does fail open relate to air to close? - ANSWERS--without the
control medium, it stays open; to close, the the control medium
must be applied
For a temperature of 1500F, what is a common gasket material? -
ANSWERS--ceramic gaskets
Any person working near energized equipment during lockout tagout
is considered what type of
Food Protection Manager Certification Examination Newest
2025/2026 Complete Questions And Correct Detailed Answers
(Verified Answers) |Brand New Version!
When inspecting a regulator control nitrogen pad system on a large
storage tank and no
pressure is found what critical item besides a regulator should be
checked? - ANSWERS--air supply
What type of service should Teflon paste never be used on? -
ANSWERS--service oxygen lines. PTFE materials are not
recommended for service on oxygen lines due to their anaerobic
nature.
A What is the principle behind how a solenoid valve opens? -
ANSWERS--it consists of a valve body, a magnetic core attached to a
valve stem, and a solenoid coil that works of inductance.
Which of the following gasses should be used to purge tubing and
pipe after cleaning? - ANSWERS--nitrogen
,2|Pa ge
What is the final step in commissioning; what should be the final
step? - ANSWERS--gathering all the documentation
In reference to PID controller, reset relates to which variable? -
ANSWERS--reset or integral provides an output that is proportional
to the time integral of the input. Eliminates offset.
An employee deenergizes a piece of equipment by removing the
power plug from the outlet, if the employees continue to hold the
power plug once removed. The employee is said to have
what type of control over the energy potential? - ANSWERS--
exclusive control
The output of a thermocouple is expressed in what units? -
ANSWERS--milli volts (mV)
A differential pressure transmitter mounted on a non-vented tank is
used to measure the _______ of the vessel? - ANSWERS--level
When properly calibrated and installed the most accurate primary
flow element is the ________? - ANSWERS--venturi tubes
What is the primary disadvantage of a direct operated regulator? -
ANSWERS--non adjustable
, 3|Pa ge
What is the advantage of a pilot operated regulator? - ANSWERS--
The pilot regulator typically includes proportional band adjustments
for verifying the sensitivity.
A valve has linear characteristic when __________. - ANSWERS--flow
rate provided is proportional to the amount of value lift
What type of input signal does a valve actuator receive from a V/P
transducer? - ANSWERS--pneumatic signal
What does it mean to say that the controller is reverse acting? -
ANSWERS--decreases the output signal when the measured medium
increases
What does it mean to say that a controller is direct acting? -
ANSWERS--increases its output signal when the measure medium
increases
How does fail open relate to air to close? - ANSWERS--without the
control medium, it stays open; to close, the the control medium
must be applied
For a temperature of 1500F, what is a common gasket material? -
ANSWERS--ceramic gaskets
Any person working near energized equipment during lockout tagout
is considered what type of
