NICET LEVEL 1 EXAM
Smoke detectors shall be tested for functionality and ___? -
ANSWERS-Sensitivity
what is the appropriate pull station mounting height? - ANSWERS-48
inches
Bleeding from an artery, which is characterized by bright red blood
that is rapid, profuse, and difficult to control - ANSWERS-Arterial
bleeding
What is the secondary power requirement at maximum load, for a
voice evacuation system ,____hours /_____minutes? - ANSWERS-
24/15
Consider a household fire alarm system which transmits signals to
remote monitoring location.The DACT test signals shall be
transmitted at least ____? - ANSWERS-monthly
What is the inspection frequency for a waterflow device? -
ANSWERS-Quarterly
On a revision to the record of completion document which, of the
following is required ? - ANSWERS-Revision date
, the features for a non required system shall be established by ______
on the basis of the goals and objectives of the bldg owner? -
ANSWERS-the system designer
What NFPA standard governs the installation of fire alarm systems
wiring ? - ANSWERS-NFPA 70
Consider a control valve supervisory signal initiating device .Such a
device shall be capable of producing which of the following signals? -
ANSWERS-Off Normal
what heat detector color code indicates a temperature classification of
High? - ANSWERS-blue color
A ground electrode shall be a minimum of _____feet in length? -
ANSWERS-8 feet
What original document shall be revised for the fire alarm system that
have been modified after the original installation ? - ANSWERS-
Record completion
what is the maximum number of 14 AWG THHN conductors which
can be installed in 1/2 intermediate metal conduit? - ANSWERS-14
wires
Smoke detectors shall be tested for functionality and ___? -
ANSWERS-Sensitivity
what is the appropriate pull station mounting height? - ANSWERS-48
inches
Bleeding from an artery, which is characterized by bright red blood
that is rapid, profuse, and difficult to control - ANSWERS-Arterial
bleeding
What is the secondary power requirement at maximum load, for a
voice evacuation system ,____hours /_____minutes? - ANSWERS-
24/15
Consider a household fire alarm system which transmits signals to
remote monitoring location.The DACT test signals shall be
transmitted at least ____? - ANSWERS-monthly
What is the inspection frequency for a waterflow device? -
ANSWERS-Quarterly
On a revision to the record of completion document which, of the
following is required ? - ANSWERS-Revision date
, the features for a non required system shall be established by ______
on the basis of the goals and objectives of the bldg owner? -
ANSWERS-the system designer
What NFPA standard governs the installation of fire alarm systems
wiring ? - ANSWERS-NFPA 70
Consider a control valve supervisory signal initiating device .Such a
device shall be capable of producing which of the following signals? -
ANSWERS-Off Normal
what heat detector color code indicates a temperature classification of
High? - ANSWERS-blue color
A ground electrode shall be a minimum of _____feet in length? -
ANSWERS-8 feet
What original document shall be revised for the fire alarm system that
have been modified after the original installation ? - ANSWERS-
Record completion
what is the maximum number of 14 AWG THHN conductors which
can be installed in 1/2 intermediate metal conduit? - ANSWERS-14
wires
