Questions and CORRECT Answers
2 Which of the following lights indicates that you will not be able to adjust the ride height? -
CORRECT ANSWER - suspension error
3 what are the benefits of the vehicle design using hash axle instead of straight axles on the
JLTV? - CORRECT ANSWER - To account for angles produces by suspension movement
4 ( 2 part) Fording stack and the pre cleaner on driver side - CORRECT ANSWER -
5 List the central 4 tire inflation system terrain settings - CORRECT ANSWER - Cross
Country (CC), Highway (HW), Snow/Sand/Mudd, Emergency
6 explain why the (something) filters need to be pressed and held for at least 1 second. -
CORRECT ANSWER - to make sure it engages properly
7 what does the DSDU monitor that signals it to turn on and off automatically - CORRECT
ANSWER - D Ignition switch turned to on.
8 list 3 benefits the DSDU provides to the driver - CORRECT ANSWER - allows CTIS
options, displays real time data about pitch/roll & circuit breakers, displays real time data about
the circuit breaker.
9 match the JLTV controls with the picture - CORRECT ANSWER - C(DSDU), F(H-
VAC), A(parking break), B (system control mode panel)
10 which of the follow is not part of the JLTV basic issue items - CORRECT ANSWER -
B Tow Bar
, 11 when inventorying your BII which of the following codes is not used to anotate (horn) -
CORRECT ANSWER - B present
12 what is the combined rating of using this hash block with the winch? - CORRECT
ANSWER - 37,000 Ib
13 list 3 post check items you inspect after driving the JLTV - CORRECT ANSWER -
possible answers (3 needed): lights and reflectors, safety devices, air tanks, fluids, and
cleanliness.
14 a unique characteristic of the JLTV is using the ________ - CORRECT ANSWER - C.
ESEU
15 while conducting a pmcs you notice the coolant fluid has a leak that is forming drops that are
falling off the vehicle. Classify the leak and decide whether or not you can operate the vehicle. -
CORRECT ANSWER - it is a class 3 leak so you cannot operate the vehicle
16 which fluid has two fill occasions - CORRECT ANSWER - D break fluid
17 select 2 occasions when a driver should not make ctis selection as it may cause binding or
other drive line damage. - CORRECT ANSWER - select both B & D
18 when cornering and transferring the vehicle weight forward can overload a tire crossing -
CORRECT ANSWER - B Under steer
19 which of the following is the most effective way to navigate a turn - CORRECT
ANSWER - D break or slow down when approaching a turn then accelerate lightly when
exiting the turn.
20 .when you are approaching a 4 way stop without the aid of your air drive do you have the
adequate view to safely navigate a right hand turn? - CORRECT ANSWER - D no
because drive doesn't have a clear field of view to right side of vehicle