Annex D Study Guide WSSOC
Questions with Accurate Answers
A flashing SAT light on the CBM-400/e indicated that you are not correct answer
receiving
After submitting the encryptions, and you power-cycled the modem, what does a
flashing amber attention light mean? correct answer Enter passphrase
Control burst purpose correct answer To maintain collision free transmission by
continuously sending and receiving the bursts established by the Acquisition
bursts
For a serial SecureCRT session to console j to a modem, what should the Baud
rate be? correct answer 115200
How do you find the correct COM port to utilize? correct answer Device Manager,
Ports
ii. __________ Subnet Mask _________ correct answer 192.168.1.2,
255.255.255.0
iii. __________ Subnet Mask _________ correct answer 192.0.2.2, 255.255.255.0
It recommended to confit ___ modem at a time in order to prevent interference
with the TX and RX sync correct answer 1
, Prior to conducting any active mission operations it is recommended to do a
_______ to ensure all components are operational correct answer IF Loopback
Purpose of a reference burst correct answer To find out how far the Sat. is in
order to determine time sync
Purpose of acquisition burst correct answer To initiate transmit timing w/ other
terminals
The CBM-400/e has the capability of _______ and _______ encryption correct
answer TRANSEC, Passphrase
The CBM-400/e has these capabilities: correct answer Linkway, Server
The difference between an Acquisition Burst and a Control Burst that an
Acquisition bursts_____ and the control_____ correct answer 3 times, 1 time
The MRT operating temperatures are from____ to _____ correct answer 23, 104
The terminal ID for the MRT is 0x____. Terminal ID for the AMRT is 0x____.
correct answer 120, 140
To console into the NCM on the MRT, the website address you must use is:
correct answer https://10.10.1.3:35000
Traffic burst purpose correct answer To send data across the network
Questions with Accurate Answers
A flashing SAT light on the CBM-400/e indicated that you are not correct answer
receiving
After submitting the encryptions, and you power-cycled the modem, what does a
flashing amber attention light mean? correct answer Enter passphrase
Control burst purpose correct answer To maintain collision free transmission by
continuously sending and receiving the bursts established by the Acquisition
bursts
For a serial SecureCRT session to console j to a modem, what should the Baud
rate be? correct answer 115200
How do you find the correct COM port to utilize? correct answer Device Manager,
Ports
ii. __________ Subnet Mask _________ correct answer 192.168.1.2,
255.255.255.0
iii. __________ Subnet Mask _________ correct answer 192.0.2.2, 255.255.255.0
It recommended to confit ___ modem at a time in order to prevent interference
with the TX and RX sync correct answer 1
, Prior to conducting any active mission operations it is recommended to do a
_______ to ensure all components are operational correct answer IF Loopback
Purpose of a reference burst correct answer To find out how far the Sat. is in
order to determine time sync
Purpose of acquisition burst correct answer To initiate transmit timing w/ other
terminals
The CBM-400/e has the capability of _______ and _______ encryption correct
answer TRANSEC, Passphrase
The CBM-400/e has these capabilities: correct answer Linkway, Server
The difference between an Acquisition Burst and a Control Burst that an
Acquisition bursts_____ and the control_____ correct answer 3 times, 1 time
The MRT operating temperatures are from____ to _____ correct answer 23, 104
The terminal ID for the MRT is 0x____. Terminal ID for the AMRT is 0x____.
correct answer 120, 140
To console into the NCM on the MRT, the website address you must use is:
correct answer https://10.10.1.3:35000
Traffic burst purpose correct answer To send data across the network
