100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached 4.2 TrustPilot
logo-home
Essay

Unit 4 - Assignment 2 - Learning Aim B - Explore the manufacturing techniques and testing methods for an organic liquid

Rating
3.9
(17)
Sold
35
Pages
14
Grade
A+
Uploaded on
26-01-2021
Written in
2022/2023

Contains: B.D2 Analyse the factors affecting the yield and purity of an organic liquid in the laboratory and their relevance to its industrial manufacture. B.M2 Demonstrate skilful application of techniques in preparing and testing the purity of an organic liquid and draw detailed conclusions. B.M3 Compare the laboratory and industrial manufacture and testing of an organic liquid. B.P3 Prepare and test the purity of an organic liquid and draw conclusions. B.P4 Describe the industrial manufacture and testing of an organic liquid. Has all the passes, merits and distinctions. An overall distinction was achieved. Has detailed information with relevant illustrations. References are attached at the bottom. Combined total of 14 pages.

Show more Read less
Institution
Course









Whoops! We can’t load your doc right now. Try again or contact support.

Written for

Study Level
Examinator
Subject
Unit

Document information

Uploaded on
January 26, 2021
Number of pages
14
Written in
2022/2023
Type
Essay
Professor(s)
Unknown
Grade
A+

Subjects

Content preview

Preparation of Organic Liquid Ethyl Ethanoate

Aim: Accurately Compose and Examine the purity of Ethyl Ethanoate.


Introduction:

As it is comprised of two or more elements chemically combined, most specifically
Ethanol and Ethanoic Acid; Ethyl Ethanoate, also recognized as Ethyl Acetate
(CH3COOC2H5), can be identified as an organic compound.
Distinguished by the nail polish scent, the chemical emits, Ethyl Ethanoate is utilized
in:

i. As a Solvent for Chemical Reactions
ii. In Perfumes and Fruits
iii. In Nail Polish Varnishes and Removers
iv. Decaffeination of Tea Leaves and Coffee Beans

In this experiment, one will focus on the formulation, development, and testing of Ethyl
Ethanoate.


Equipment Used

1. Anti-Bumping Granules
Decreases pressure being produced in the chemical.

2. Bottom Flask (Round)
This is a cylinder container with a small mouth, and a round base. It will be used
to hold, heat, and stir liquids.

3. Calcium Chloride
This will be utilized as a drying agent.

4. Concentrated Sulphuric Acid
A chemical that will be utilised as a catalyst, to speed up the chemical reaction,
without being used itself.

5. Conical Flask
A glass container THAT has a flat bottom, cylinder neck, and a conical body. It is
used to collect two-thirds of the finalised mixture.

6. Reflux Condenser
It permits the vapor from the mixture from the vapor to be condensed into liquid
form, and collected.

7. Clamp Stand
Used to hold test-tubes and flasks in place.

8. Ethanol
Part of the original mixture and will be utilised as a reactant.


9. Glacial Ethanoic
Part of the original mixture and will be utilised as a reactant.


10. Heating Mantle

1|Page

, As an alternative to a heating bath, heating mantles will be used to heat up the
mixture.

11. Measuring Cylinder
Used to measure the Volume of a liquid


12. Separating Funnel
Separate’s liquid mixtures, into two phases

13. Sodium Carbonate
Part of the original mixture and will be utilised as a reactant.

14. Stopper
Inhibits gas or liquid from escaping. Prevents contamination of product.

15. Spatula
Used to collect powder, or small granules


Risk Assessment


Hazardous Chemicals or Nature of Hazard Control Measure
Objects Being Used

1) Glassware Can break, and cause The teacher should
Conical Flask injury, such as minor or demonstrate the proper
Separating Funnel severe cuts. way to handle the
Round Bottom Flask May spill the chemicals glassware.
on the individual If a student does
handling the object become injured due to
the glassware, they
should inform a teacher,
who will seek medical
help immediately.
Wear Personal
Protective Equipment,
e.g. a lab coat, to
prevent chemicals from
spilling on skin.

2) Heating Mantle If mishandled, it can The teacher should
burn an individual’s skin. demonstrate the proper
Very high-risk if near way to handle the
flammable objects. Can heating mantle.
cause them to combust, Make sure there are
risking the environment, no flammable objects
and the people in it. placed in close vicinity
with the heating mantle.
Wear Personal
Protective Equipment, as
they will act as a first
layer of skin, reducing
the amount of damage
on may have if faced
with these risks.




2|Page
$23.40
Get access to the full document:
Purchased by 35 students

100% satisfaction guarantee
Immediately available after payment
Both online and in PDF
No strings attached

Reviews from verified buyers

Showing 7 of 17 reviews
2 year ago

2 year ago

3 year ago

3 year ago

Denizens! Thank you so much for taking the opportunity to review this assignment. Wish you the best of luck in your course and a blessed year :)

1 year ago

The content of this report is tailored to the knowledge I was in need of

1 year ago

Reply deleted by the user

1 year ago

Augmut!!Thank you so much for taking the opportunity to review this assignment. Im glad its to your liking. Wish you the best of luck in your course :)

3 year ago

3 year ago

Thank you so much for taking the opportunity to review this assignment Louis! Wish you the best of luck in your course and a blessed year :)

2 year ago

3 year ago

3 year ago

Thank you so much for taking the opportunity to review this assignment. Feel free to reach out if you have any questions or clarifications regarding the assignment. Wish you the best of luck in your course :)

3.9

17 reviews

5
8
4
3
3
4
2
1
1
1
Trustworthy reviews on Stuvia

All reviews are made by real Stuvia users after verified purchases.

Get to know the seller

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
kan6928484 Barnet
Follow You need to be logged in order to follow users or courses
Sold
425
Member since
4 year
Number of followers
307
Documents
2
Last sold
5 months ago
BTEC APPLIED SCIENCE ASSIGNMENTS

3.9

95 reviews

5
41
4
22
3
18
2
5
1
9

Recently viewed by you

Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Frequently asked questions