FDOT Asphalt and Concrete Module 2
(2025) – Training Review & Exam Prep
REAL EXAM
A composite material that is prepared in a hot-mix plant and used for construction of highway, parking
lot, or airfield pavements capable of supporting high traffic load volumes and axle loads. -
ANSWER ✔---asphalt cement
A rock crusher in which a steel center cone rotates eccentrically to crush the material against the
outside cylindrical steel wall. - ANSWER ✔---gyratory crushers
It is a bituminous material that is produced by distillation of petroleum crude oil. - ANSWER ✔---
asphalt cement
Metal plates of various shapes placed longitudinally inside the shell of a drum dryer or mixture. As the
material moves through the drum, the flight first lift the aggregate and then tumble it through the hot
gases. - ANSWER ✔---Flights
The top surface layer of an asphalt pavement, usually less than 1 in. thick, to improve skid resistance and
smoothness. - ANSWER ✔---friction course
(2025) – Training Review & Exam Prep
REAL EXAM
A composite material that is prepared in a hot-mix plant and used for construction of highway, parking
lot, or airfield pavements capable of supporting high traffic load volumes and axle loads. -
ANSWER ✔---asphalt cement
A rock crusher in which a steel center cone rotates eccentrically to crush the material against the
outside cylindrical steel wall. - ANSWER ✔---gyratory crushers
It is a bituminous material that is produced by distillation of petroleum crude oil. - ANSWER ✔---
asphalt cement
Metal plates of various shapes placed longitudinally inside the shell of a drum dryer or mixture. As the
material moves through the drum, the flight first lift the aggregate and then tumble it through the hot
gases. - ANSWER ✔---Flights
The top surface layer of an asphalt pavement, usually less than 1 in. thick, to improve skid resistance and
smoothness. - ANSWER ✔---friction course
