red - Answers A ____ color or stripe down one side of a cable marks this side of the cable as pin
1.
A) red
B) black
C) green
D) blue
grounded to - Answers The motherboard, like all other components inside the computer case,
should be ____ the chassis.
A) grounded to
B) grounded from
C) detached from
D) attached to
MicroATX - Answers The ____ form factor is a major variation of ATX and addresses some
technologies that have emerged since the original development of ATX.
A) MicroATX
B) Advanced ATX
C) MacroATX
D) UnionATX
Overclocking - Answers ____ is running a processor, motherboard, or video card at a higher
frequency than the manufacturer recommends and is not considered a best practice.
A) Overclocking
B) Overbuilding
C) Overrunning
D) Overburning
brownout - Answers A ____ of the house current might cause symptoms of electrical power
problems.
, A) whiteout
B) blackout
C) grayout
D) brownout
P1 - Answers The first ATX power supplies and motherboards used a single power connector
called the ____ connector that had 20 pins.
A) P1
B) A1
C) P2
D) P3
line conditioner - Answers A(n) ____ might solve the problem of intermittent errors caused by
noise in the power line to the PC.
A) line cleaner
B) line conditioner
C) line manager
D) uninterruptible power supply
EnhancedATX - Answers Motherboards that support PCI Express and have the 24-pin P1
connector are sometimes called ____ boards.
A) Micro ATX
B) Enhanced ATX
C) Advanced ATX
D) Modified ATX
tower - Answers A ____ case sits upright on the floor or a desk and can be as high as two feet
and has room for several drives.
A) low-profile
B) desktop
C) tower