Cisco 200-301 Exam Actual Questions 2025/2026 – Complete Verified Answers & Study Guide

Cisco 200-301 Exam Actual Questions & Answers

-uses ports 20 and 21
3. What are some descriptions of -provides reliability when loading an IOS image upon boot up
FTP? -uses TCP


-uses port 69
3. What are some descriptions of -does not require user authentication
TFTP? -uses UDP


A. input errors
D. CRC
4. A frame that enters a switch
fails the Frame Check Sequence.
Which two interface counters are
incremented? (Choose two.)
A. input errors
B. frame
C. giants
D. CRC
E. runts



A. TCP uses the three-way handshake, and UDP does not
guarantee message delivery.


6. How do TCP and UDP differ in
the way that they establish a
connection between two
endpoints?
A. TCP uses the three-way
handshake, and UDP does not
guarantee message delivery.
B. TCP uses synchronization
packets, and UDP uses
acknowledgment packets.
C. UDP provides reliable
message transfer, and TCP is a
connectionless protocol.
D. UDP uses SYN, SYN ACK,
and FIN bits in the frame header
while TCP uses SYN, SYN ACK,
and ACK bits.




A. management
7. Which 802.11 frame type is
Association Response?
A. management
B. protected frame
C. action
D. control
Hide Solution




1 Cisco 200-301 Exam Actual Questions.pdf

, Cisco 200-301 Exam Actual Questions & Answers
C. A leaf switch can be added with connections to every spine
switch.


Question #8
In which way does a spine-and-
leaf architecture allow for
scalability in a network when
additional access ports are
require?
A. A spine switch and a leaf
switch can be added with
redundant connections between
them.
B. A spine switch can be added
with at least 40 GB uplinks.
C. A leaf switch can be added
with connections to every spine
switch.
D. A leaf switch can be added
with a single connection to a core
spine switch.




C. The hypervisor virtualizes physical components including CPU,
memory, and storage.

Question #9
What identifies the functionality of
virtual machines?
A. The hypervisor communicates
on Layer 3 without the need for
additional resources.
B. Each hypervisor supports a
single virtual machine and a
single software switch.
C. The hypervisor virtualizes
physical components including
CPU, memory, and storage.
D. Virtualized servers run
efficiently when physically
connected to a switch that is
separate from the hypervisor.




C. ipv6 address autoconfig

Question #10
Which command automatically
generates an IPv6 address from
a specified IPv6 prefix and MAC
address of an interface?
A. ipv6 address dhcp
B. ipv6 address
2001:DB8:5:112::/64 eui-64
C. ipv6 address autoconfig
D. ipv6 address
2001:DB8:5:112::2/64 link-local




2 Cisco 200-301 Exam Actual Questions.pdf

, Cisco 200-301 Exam Actual Questions & Answers
D. FF02::1
E. FF02::2
Question #11
When configuring IPv6 on an
interface, which two IPv6
multicast groups are joined?
(Choose two.)
A. 2000::/3
B. 2002::5
C. FC00::/7
D. FF02::1
E. FF02::2



C. The Layer 2 switch floods packets to all ports except the
receiving port in the given VLAN.



Question #13
What is the default behavior of a
Layer 2 switch when a frame with
an unknown destination MAC
address is received?
A. The Layer 2 switch forwards
the packet and adds the
destination MAC address to its
MAC address table.
B. The Layer 2 switch sends a
copy of a packet to CPU for
destination MAC address
learning.
C. The Layer 2 switch floods
packets to all ports except the
receiving port in the given VLAN.
D. The Layer 2 switch drops the
received frame.




3 Cisco 200-301 Exam Actual Questions.pdf

, Cisco 200-301 Exam Actual Questions & Answers
D. interface e0/0 description to XX-AXXX:XXXXX ip address
209.165.201.2 225.255.255.252


Question #14
An engineer must configure a /30
subnet between two routes.
Which usable IP address and
subnet mask combination meets
this criteria?
A. interface e0/0 description to
XX-AXXX:XXXXX ip address
10.2.1.3 255.255.255.252
B. interface e0/0 description to
XX-AXXX:XXXXX ip address
192.168.1.1 255.255.255.248
C. interface e0/0 description to
XX-AXXX:XXXXX ip address
172.16.1.4 255.255.255.248
D. interface e0/0 description to
XX-AXXX:XXXXX ip address
209.165.201.2 225.255.255.252




B. 172.28.0.0/16

Question #15
Which network allows devices to
communicate without the need to
access the Internet?
A. 172.9.0.0/16
B. 172.28.0.0/16
C. 192.0.0.0/8
D. 209.165.201.0/24


B. unique local

Question #17
Which IPv6 address type
provides communication between
subnets and cannot route on the
Internet?
A. link-local
B. unique local
C. multicast
D. global unicast



D. FF00::/8

Question #18
Which IPv6 address block sends
packets to a group address rather
than a single address?
A. 2000::/3
B. FC00::/7
C. FE80::/10
D. FF00::/8




4 Cisco 200-301 Exam Actual Questions.pdf