MSF COURSE EXAMINATION WITH
CONCRETE QUESTIONS AND SOLID
ANSWERS / GET 100% VERIFIED ANSWERS /
ALREADY GRADED A+ (Certified Study
Resources)
Why is motorcycling considered serious fun?
Serious because there is risk involved, fun because riding
a motorcycle is a joy.
Learning to ride well requires what physical traits?
Be healthy, have fitness, strength, and coordination.
What do RiderCoaches do?
They are here to guide me.
What are the four requirements for successful course
completion?
1. Complete all course assignments.
2. Attend all sessions fully.
3. Pass a knowledge test.
4. Pass an on-motorcycle skill test.
When does a RiderCoach not permit further riding in the
course?
If you have a lot of difficulty, or become a danger to
yourself and/or others.
What are the three basic motorcycle types?
Street, Dual-Purpose, Off-Highway
What motorcycle type will you likely ride? Why?
,I will likely ride a street motorcycle and use it for
transportation.
What are the six primary motorcycle controls?
Clutch, handle bars, front brake lever, throttle, gearshift
lever, rear brake pedal.
How do you operate a motorcycles throttle?
To increase engine speed, twist towards you. To decrease
engine speed, twist away.
What does the clutch lever do?
It connects power from the engine to the rear wheel.
Squeeze it in to disconnect the power and ease it out to
connect.
How is the gearshift lever operated?
Lift up firmly and release for a higher gear, press down
firmly and release for a lower gear.
What is a shift pattern?
?
How are the two brake controls operated?
Front brake is squeezed rear brake is pressed down.
What are possible positions on the fuel valve?
On, reserve, prime, off.
What are possible positions on the ignition switch?
On, off, lock, and sometimes park.
What is the choke control used for?
It provides an enriched fuel mixture to help start a cold
engine.
Why does a motorcycle have an engine cut-off switch?
, It allows you to shut off the engine without removing your
hand from the grip.
What are some common indicators that display
information?
Speedometer, odometer, tachometer.
What is important to know about a convex mirror?
They provide a wider view but make objects look farther
away.
What is the difference between a side stand and a center
stand?
A side stand supports a motorcycle when parked,
a center stand makes the motorcycle upright and raises
the rear tire for maintenance.
Complete the Controls Quiz on page 7 and check your
answers
Just google a picture of motorcycle controls and study it.
List the five steps of the engine pre-start routine.
-FINE-C;
-Fuel,
-Ignition,
-Neutral,
-Engine cut-off switch,
-Choke/Clutch.
What are the three steps to follow when shutting off the
engine?
1. Turn the engine cut-off switch to off with your right
thumb.
2. Turn the ignition switch to off.
3. Turn the fuel supply valve to off.
CONCRETE QUESTIONS AND SOLID
ANSWERS / GET 100% VERIFIED ANSWERS /
ALREADY GRADED A+ (Certified Study
Resources)
Why is motorcycling considered serious fun?
Serious because there is risk involved, fun because riding
a motorcycle is a joy.
Learning to ride well requires what physical traits?
Be healthy, have fitness, strength, and coordination.
What do RiderCoaches do?
They are here to guide me.
What are the four requirements for successful course
completion?
1. Complete all course assignments.
2. Attend all sessions fully.
3. Pass a knowledge test.
4. Pass an on-motorcycle skill test.
When does a RiderCoach not permit further riding in the
course?
If you have a lot of difficulty, or become a danger to
yourself and/or others.
What are the three basic motorcycle types?
Street, Dual-Purpose, Off-Highway
What motorcycle type will you likely ride? Why?
,I will likely ride a street motorcycle and use it for
transportation.
What are the six primary motorcycle controls?
Clutch, handle bars, front brake lever, throttle, gearshift
lever, rear brake pedal.
How do you operate a motorcycles throttle?
To increase engine speed, twist towards you. To decrease
engine speed, twist away.
What does the clutch lever do?
It connects power from the engine to the rear wheel.
Squeeze it in to disconnect the power and ease it out to
connect.
How is the gearshift lever operated?
Lift up firmly and release for a higher gear, press down
firmly and release for a lower gear.
What is a shift pattern?
?
How are the two brake controls operated?
Front brake is squeezed rear brake is pressed down.
What are possible positions on the fuel valve?
On, reserve, prime, off.
What are possible positions on the ignition switch?
On, off, lock, and sometimes park.
What is the choke control used for?
It provides an enriched fuel mixture to help start a cold
engine.
Why does a motorcycle have an engine cut-off switch?
, It allows you to shut off the engine without removing your
hand from the grip.
What are some common indicators that display
information?
Speedometer, odometer, tachometer.
What is important to know about a convex mirror?
They provide a wider view but make objects look farther
away.
What is the difference between a side stand and a center
stand?
A side stand supports a motorcycle when parked,
a center stand makes the motorcycle upright and raises
the rear tire for maintenance.
Complete the Controls Quiz on page 7 and check your
answers
Just google a picture of motorcycle controls and study it.
List the five steps of the engine pre-start routine.
-FINE-C;
-Fuel,
-Ignition,
-Neutral,
-Engine cut-off switch,
-Choke/Clutch.
What are the three steps to follow when shutting off the
engine?
1. Turn the engine cut-off switch to off with your right
thumb.
2. Turn the ignition switch to off.
3. Turn the fuel supply valve to off.
