1
For Expert help and assignment solutions, +254707240657
NEBOSH HSE PSM Questions and Answers
(100% Correct Answers) Already Graded
A+
Definition of Process Safety Management [ANS:] A blend of
engineering and management skills focused on preventing
catastrophic accidents and near misses, particularly structural
collapse, explosions, fires and toxic releases associated with loss of
containment of energy or dangerous substances such as
© 2025 Assignment Expert
chemicals and petroleum products.
Sources of Process Safety Management information: [ANS:] Safety
Data Sheets (SDS)
Guru01 - Stuvia
Process design criteria.
Process Flow Diagrams (PFD)
Standard Operating procedures (SOPs) setting safe limits, such as
for temperatures, pressures, flows, compositions and levels as well
as evaluation of the effects.
Inspection, audit and investigation reports.
Maintenance records.
Piping and Instrument Diagrams (P&Ids).
Process Control Systems, including software integrity.
Relief system designs.
Fire detection and protection plans.
, 2
For Expert help and assignment solutions, +254707240657
Management Of Change - MOC [ANS:] MOC is a management
control approach to make sure that proposed changes are
properly assessed and authorized.
Management Of Change - MOC - Requirements: [ANS:] Hazard
and Risk Analysis.
Process for all changes to be authorized.
Changes documented.
© 2025 Assignment Expert
Consult and inform.
Training.
Guru01 - Stuvia
Workers Consultation [ANS:] The two-way exchange of information
between parties. In this case, between employer and worker.
Definition of Competence [ANS:] A combination of practical and
thinking skills, experience and knowledge.
Elements of a Process Safety Management System [ANS:] Element
1: Strong Leadership.
Element 2: Hazard Analysis.
Element 3: Management Of Change.
Element 4: Operation within design intent.
Element 5: Competence management. (Training).
Element 6: Control of Contractors.
Element 7: Asset Integrity.
, 3
For Expert help and assignment solutions, +254707240657
Element 8: Emergency Response.
Element 9: Process Safety Incident Investigations.
Element 10: Performance Monitoting and Auditing.
Leading Indicators [ANS:] Proactive measurements of conditions
that monitor process safety before something goes wrong and to
see if things are operating as intended.
Lagging Indicators [ANS:] Reactive measures that took at failures,
© 2025 Assignment Expert
such as the number of injuries, the number of near misses and the
number of spills that are reported, or excursions where plant is
operated outside the intended operational envelope.
Guru01 - Stuvia
Five Steps for Risk Assessment [ANS:] Step 1: Identify the hazards.
Step 2: Identify the people who might be harmed and how.
Step 3: Evaluate the risk and decide on precautions.
Step 4: Record the significant findings.
Step 5: Review and update as necessary.
Risk Assessment Techniques [ANS:] 5 WHs: What, Where, When,
How, Why.
Bow Tie Model.
Hazard and operability study (HAZOP).
Hazard Identification (HAZID).
Failure Mode Effect Analysis (FMEA).
For Expert help and assignment solutions, +254707240657
NEBOSH HSE PSM Questions and Answers
(100% Correct Answers) Already Graded
A+
Definition of Process Safety Management [ANS:] A blend of
engineering and management skills focused on preventing
catastrophic accidents and near misses, particularly structural
collapse, explosions, fires and toxic releases associated with loss of
containment of energy or dangerous substances such as
© 2025 Assignment Expert
chemicals and petroleum products.
Sources of Process Safety Management information: [ANS:] Safety
Data Sheets (SDS)
Guru01 - Stuvia
Process design criteria.
Process Flow Diagrams (PFD)
Standard Operating procedures (SOPs) setting safe limits, such as
for temperatures, pressures, flows, compositions and levels as well
as evaluation of the effects.
Inspection, audit and investigation reports.
Maintenance records.
Piping and Instrument Diagrams (P&Ids).
Process Control Systems, including software integrity.
Relief system designs.
Fire detection and protection plans.
, 2
For Expert help and assignment solutions, +254707240657
Management Of Change - MOC [ANS:] MOC is a management
control approach to make sure that proposed changes are
properly assessed and authorized.
Management Of Change - MOC - Requirements: [ANS:] Hazard
and Risk Analysis.
Process for all changes to be authorized.
Changes documented.
© 2025 Assignment Expert
Consult and inform.
Training.
Guru01 - Stuvia
Workers Consultation [ANS:] The two-way exchange of information
between parties. In this case, between employer and worker.
Definition of Competence [ANS:] A combination of practical and
thinking skills, experience and knowledge.
Elements of a Process Safety Management System [ANS:] Element
1: Strong Leadership.
Element 2: Hazard Analysis.
Element 3: Management Of Change.
Element 4: Operation within design intent.
Element 5: Competence management. (Training).
Element 6: Control of Contractors.
Element 7: Asset Integrity.
, 3
For Expert help and assignment solutions, +254707240657
Element 8: Emergency Response.
Element 9: Process Safety Incident Investigations.
Element 10: Performance Monitoting and Auditing.
Leading Indicators [ANS:] Proactive measurements of conditions
that monitor process safety before something goes wrong and to
see if things are operating as intended.
Lagging Indicators [ANS:] Reactive measures that took at failures,
© 2025 Assignment Expert
such as the number of injuries, the number of near misses and the
number of spills that are reported, or excursions where plant is
operated outside the intended operational envelope.
Guru01 - Stuvia
Five Steps for Risk Assessment [ANS:] Step 1: Identify the hazards.
Step 2: Identify the people who might be harmed and how.
Step 3: Evaluate the risk and decide on precautions.
Step 4: Record the significant findings.
Step 5: Review and update as necessary.
Risk Assessment Techniques [ANS:] 5 WHs: What, Where, When,
How, Why.
Bow Tie Model.
Hazard and operability study (HAZOP).
Hazard Identification (HAZID).
Failure Mode Effect Analysis (FMEA).
