1
For Expert help and assignment solutions, +254707240657
Mold Remediation Questions and Answers
(100% Correct Answers) Already Graded
A+
The AMRT class was developed, in part, using what ANSI/IICRC
standards? [ Ans: ] SR500
ANSI [ Ans: ] American National Standards Institute: A private,
non-profit organization that provides oversight on the
© 2025 Assignment Expert
development and use of voluntary consensus standards in the
United States. Founded 1918
The hallmarks of the American National Standards process
Guru01 - Stuvia
include: [ Ans: ] 1 Essential requirements for Due PROCESS
2 CONSENSUS BODY that includes representatives from
MATERIALLY AFFECTED AND INTERESTED PARTIES
3 Broad -based PUBLIC REVIEW on draft standards
capillary action [ Ans: ] movement of water against an opposing
force
Category 1 [ Ans: ] Water that originates from sanitary water
source
Category 2 [ Ans: ] Water contains significant contamination
and has the potential to cause discomfort or sickness.
Category 3 [ Ans: ] Water is grossly contaminated and contain
pathogenic and/or other harmful agents
Competent person [ Ans: ] A person who is capable of
identifying existing and predictable hazards in the surroundings or
working conditions which are unsanitary, hazardous, or dangerous
to employees, and who has authorization to take prompt
corrective measures to eliminate them.
, 2
For Expert help and assignment solutions, +254707240657
Complexity [ Ans: ] Conditions causing a project to become a
more difficult or detailed, but DO NOT PREVENT WORK FROM
BEING PERFORMED ADEQUATELY
Complications [ Ans: ] conditions arising after the start of work
causing a change in scope of work or work plan
Limitations [ Ans: ] Limits on scope of work
Conflicts [ Ans: ] Limitations, complexities, or complications that
result in a disagreement between the parties involved.
Condition 1 [ Ans: ] (NORMAL FUNGI ECOLOGY). Indoor
environment that may have settled spores
Condition 2 [ Ans: ] (SETTLED SPORES OR FUNGI) An indoor
© 2025 Assignment Expert
environment which is primarily contaminated with settled spores.
Condition 3 [ Ans: ] (ACTUAL GROWTH) An indoor environment
with the presence of actual mold growth.
Guru01 - Stuvia
Due Diligence [ Ans: ] The level of care, prudence, and
judgment that should be reasonable performed regarding safety
parameters
Cell [ Ans: ] The fundamental unit of life
Endospore [ Ans: ] Environmentally resistant dormant, non -
reproductive structure produced by bacteria
Engineering Controls [ Ans: ] Primary controls methods using
equipment in such a manner that they limit exposure of
remediation workers and occupants to prevent the introduction of
containments to surrounding uncontaminated area contents.
(Doing things tht prevent cross contamination)
Engineering Controls are not limited to polyethylene sheeting.
What are a few other examples of Engineering Controls? [ Ans: ]
AFD, Control demo, Using a biostat on sewage.
What will determine the amount of pressure differential you can
achieve if NAM is not a limiting factor? [ Ans: ] The strength of
the materials used
For Expert help and assignment solutions, +254707240657
Mold Remediation Questions and Answers
(100% Correct Answers) Already Graded
A+
The AMRT class was developed, in part, using what ANSI/IICRC
standards? [ Ans: ] SR500
ANSI [ Ans: ] American National Standards Institute: A private,
non-profit organization that provides oversight on the
© 2025 Assignment Expert
development and use of voluntary consensus standards in the
United States. Founded 1918
The hallmarks of the American National Standards process
Guru01 - Stuvia
include: [ Ans: ] 1 Essential requirements for Due PROCESS
2 CONSENSUS BODY that includes representatives from
MATERIALLY AFFECTED AND INTERESTED PARTIES
3 Broad -based PUBLIC REVIEW on draft standards
capillary action [ Ans: ] movement of water against an opposing
force
Category 1 [ Ans: ] Water that originates from sanitary water
source
Category 2 [ Ans: ] Water contains significant contamination
and has the potential to cause discomfort or sickness.
Category 3 [ Ans: ] Water is grossly contaminated and contain
pathogenic and/or other harmful agents
Competent person [ Ans: ] A person who is capable of
identifying existing and predictable hazards in the surroundings or
working conditions which are unsanitary, hazardous, or dangerous
to employees, and who has authorization to take prompt
corrective measures to eliminate them.
, 2
For Expert help and assignment solutions, +254707240657
Complexity [ Ans: ] Conditions causing a project to become a
more difficult or detailed, but DO NOT PREVENT WORK FROM
BEING PERFORMED ADEQUATELY
Complications [ Ans: ] conditions arising after the start of work
causing a change in scope of work or work plan
Limitations [ Ans: ] Limits on scope of work
Conflicts [ Ans: ] Limitations, complexities, or complications that
result in a disagreement between the parties involved.
Condition 1 [ Ans: ] (NORMAL FUNGI ECOLOGY). Indoor
environment that may have settled spores
Condition 2 [ Ans: ] (SETTLED SPORES OR FUNGI) An indoor
© 2025 Assignment Expert
environment which is primarily contaminated with settled spores.
Condition 3 [ Ans: ] (ACTUAL GROWTH) An indoor environment
with the presence of actual mold growth.
Guru01 - Stuvia
Due Diligence [ Ans: ] The level of care, prudence, and
judgment that should be reasonable performed regarding safety
parameters
Cell [ Ans: ] The fundamental unit of life
Endospore [ Ans: ] Environmentally resistant dormant, non -
reproductive structure produced by bacteria
Engineering Controls [ Ans: ] Primary controls methods using
equipment in such a manner that they limit exposure of
remediation workers and occupants to prevent the introduction of
containments to surrounding uncontaminated area contents.
(Doing things tht prevent cross contamination)
Engineering Controls are not limited to polyethylene sheeting.
What are a few other examples of Engineering Controls? [ Ans: ]
AFD, Control demo, Using a biostat on sewage.
What will determine the amount of pressure differential you can
achieve if NAM is not a limiting factor? [ Ans: ] The strength of
the materials used
