1
For Expert help and assignment solutions, +254707240657
nj boat test Questions and Answers (100%
Correct Answers) Already Graded A+
left —ANS: the port side of a vessel is the ____ side
rear —ANS: the stern of a vessel is the _______ of the vessel
displacement and planning —ANS: basic types of vessel hulls can
be described as
round, flat and vee —ANS: name three basic hull shapes
© 2025 Assignment Expert
less than 16ft
16 to less than 26 ft
Guru01 - Stuvia
26 to less than 40ft
40ft to less than 65ft —ANS: what are the four length classes of
vessels?
inboard, outboard, stern drive and jet drive —ANS: list the four
basic types of engines
automotive engines adapted for marine use —ANS: stern drive
and inboard engines are
inboard vessels —ANS: the US Coast Guard considers personal
watercraft to be
False —ANS: T/F- personal watercraft are not subject to the laws
and requirements of other vessels.
impeller —ANS: device used to pump and force water under
pressure through a steering nozzle at the rear of the vessel
1. capacity in lbs or # of people
2. recommended max. horsepower —ANS: what info is displayed
on the capacity plate of an outboard powerboat?
1. vessel's description: give #, size, make, etc.
, 2
For Expert help and assignment solutions, +254707240657
2. #, names and addresses of passengers
3. trip plan —ANS: list 3 things that should be included on your
float plan before you embark on an extended outing
1. keep the nozzle in contact with the tank opening
2. fill tank slowly and avoid spilling
3. never fill to the brim —ANS: name 3 things that you should do
while filling the fuel tank of your vessel
1/3 out, 1/3 in and 1/3 in reserve —ANS: a rule of thumb to
prevent running out of fuel on a PWC is _______ out, ________ in,
and _______ in reserve
© 2025 Assignment Expert
90% —ANS: if the combined weight of the vessel and is engine is
more than ________ of the recommended load capacity of the
trailer, you should get the next larger trailer.
presses down on the towing hitch —ANS: "tongue weight" is the
Guru01 - Stuvia
amt of the loaded trailer's weight that
crisscrossed —ANS: two strong safety chains should be __________
to support the trailer's coupler in case it becomes disconnected
from the towing vehicle
well away from the boat ramp —ANS: where should you prepare
your vessel before launching it away from the trailer?
•keep well tuned
•check oil levels
•change oil
•check batteries
•grease and lubricate
•check for anything loose —ANS: name 3 engine maintenance
tips
stern line —ANS: if the wind or current direction is toward the
dock, you should cast off the ______ first when leaving the dock
For Expert help and assignment solutions, +254707240657
nj boat test Questions and Answers (100%
Correct Answers) Already Graded A+
left —ANS: the port side of a vessel is the ____ side
rear —ANS: the stern of a vessel is the _______ of the vessel
displacement and planning —ANS: basic types of vessel hulls can
be described as
round, flat and vee —ANS: name three basic hull shapes
© 2025 Assignment Expert
less than 16ft
16 to less than 26 ft
Guru01 - Stuvia
26 to less than 40ft
40ft to less than 65ft —ANS: what are the four length classes of
vessels?
inboard, outboard, stern drive and jet drive —ANS: list the four
basic types of engines
automotive engines adapted for marine use —ANS: stern drive
and inboard engines are
inboard vessels —ANS: the US Coast Guard considers personal
watercraft to be
False —ANS: T/F- personal watercraft are not subject to the laws
and requirements of other vessels.
impeller —ANS: device used to pump and force water under
pressure through a steering nozzle at the rear of the vessel
1. capacity in lbs or # of people
2. recommended max. horsepower —ANS: what info is displayed
on the capacity plate of an outboard powerboat?
1. vessel's description: give #, size, make, etc.
, 2
For Expert help and assignment solutions, +254707240657
2. #, names and addresses of passengers
3. trip plan —ANS: list 3 things that should be included on your
float plan before you embark on an extended outing
1. keep the nozzle in contact with the tank opening
2. fill tank slowly and avoid spilling
3. never fill to the brim —ANS: name 3 things that you should do
while filling the fuel tank of your vessel
1/3 out, 1/3 in and 1/3 in reserve —ANS: a rule of thumb to
prevent running out of fuel on a PWC is _______ out, ________ in,
and _______ in reserve
© 2025 Assignment Expert
90% —ANS: if the combined weight of the vessel and is engine is
more than ________ of the recommended load capacity of the
trailer, you should get the next larger trailer.
presses down on the towing hitch —ANS: "tongue weight" is the
Guru01 - Stuvia
amt of the loaded trailer's weight that
crisscrossed —ANS: two strong safety chains should be __________
to support the trailer's coupler in case it becomes disconnected
from the towing vehicle
well away from the boat ramp —ANS: where should you prepare
your vessel before launching it away from the trailer?
•keep well tuned
•check oil levels
•change oil
•check batteries
•grease and lubricate
•check for anything loose —ANS: name 3 engine maintenance
tips
stern line —ANS: if the wind or current direction is toward the
dock, you should cast off the ______ first when leaving the dock
