NX Design Associate Certification
Questions and Answers Graded A+
Active design group indicator - In the part navigator, the sphere to the left of the group
name is green
Add Component dialog - Which of the following does not give you information about the
constraints in your assembly? - The Add Component dialog.
Add them when creating new component - An action you can perform to geometry at
the assembly level in top-down assembly modeling.
Alert message types - Which one of these are not an Alert message type? Caution.
Along Spine - Is the other type of creation method in the Helix command aside from
Along Vector.
Alternate Solution command - To display other solutions for a Linear dimension you
may use the Alternate Solution command or Enter a negative value for the dimension
type.
As Saved Folders - A setting in the Search Option that is not available when using the
Where Use Report command.
Assembly - In Bottom-up modeling, you create component parts at the Assembly level.
Assembly load options - Options that determine if NX loads component parts fully or
partially
Assembly Navigator - In an assembly where do you find the name of the reference set
that is being displayed for a component? - Assembly Navigator.
Automatically created reference sets - All parts files with geometry have Empty and
Entire Part reference sets created automatically
Body-based features - Which one of the following feature types can you browse in the
Browser? Body-based features.
Boolean operations - Always pick the same target body
Boolean operations - Operations that include Unite, Subtract, and Intersect.
Bottom-up Assembly Building - How do you create an assembly using the Bottom-Up
method? - Create the parts separately and then add them to the assembly.
, Bounded Plane - Can create a surface from an open set of connected planar curves.
Browser graph view window - Which one of these objects from the part navigator cannot
be explored using the Browser graph view window? Model Views.
Browser graphics window - Which one of these statements is true about the Browser
graphics window? The Browser graph view window explores parent-child relations
between features and their ancestor and descendant objects.
By Poles - Lets you create a spline by constructing and manipulating spline poles.
By Poles - Used to create a spline that is defined by using the average of selected
points.
Chamfer feature advantage - Your model history will have fewer features when created
in a sketch.
Change the Cap Option to Arc Cap - The action to switch from sharp corners to a radius
corner based off the offset value when creating an offset curve.
Clearance set definition - Defined with two collections to reduce the number of checks
the software needs to perform
Closed set of 2D curves - Required to create a Bounded Plane.
Color-coding assembly - One of the reasons you use Visual Reporting to summarize a
specific condition
Combine - Does not use Target Body and Tool Body selections.
Constraint Navigator - Where can you look to get information about an assembly's
constraints? - The Constraint Navigator.
Construction Geometry - Not a default reference set display condition that you can use
for each component or sub-assembly
Continuous Auto Dimensioning - When dimensions are created automatically as you
sketch.
Create a Basic Drawing - To create a basic drawing in NX, go to File, then New. In the
top panel of the pop-up screen, find Drawing and click it.
Create a pattern in a sketch - What command is used to create a pattern in a sketch?
Questions and Answers Graded A+
Active design group indicator - In the part navigator, the sphere to the left of the group
name is green
Add Component dialog - Which of the following does not give you information about the
constraints in your assembly? - The Add Component dialog.
Add them when creating new component - An action you can perform to geometry at
the assembly level in top-down assembly modeling.
Alert message types - Which one of these are not an Alert message type? Caution.
Along Spine - Is the other type of creation method in the Helix command aside from
Along Vector.
Alternate Solution command - To display other solutions for a Linear dimension you
may use the Alternate Solution command or Enter a negative value for the dimension
type.
As Saved Folders - A setting in the Search Option that is not available when using the
Where Use Report command.
Assembly - In Bottom-up modeling, you create component parts at the Assembly level.
Assembly load options - Options that determine if NX loads component parts fully or
partially
Assembly Navigator - In an assembly where do you find the name of the reference set
that is being displayed for a component? - Assembly Navigator.
Automatically created reference sets - All parts files with geometry have Empty and
Entire Part reference sets created automatically
Body-based features - Which one of the following feature types can you browse in the
Browser? Body-based features.
Boolean operations - Always pick the same target body
Boolean operations - Operations that include Unite, Subtract, and Intersect.
Bottom-up Assembly Building - How do you create an assembly using the Bottom-Up
method? - Create the parts separately and then add them to the assembly.
, Bounded Plane - Can create a surface from an open set of connected planar curves.
Browser graph view window - Which one of these objects from the part navigator cannot
be explored using the Browser graph view window? Model Views.
Browser graphics window - Which one of these statements is true about the Browser
graphics window? The Browser graph view window explores parent-child relations
between features and their ancestor and descendant objects.
By Poles - Lets you create a spline by constructing and manipulating spline poles.
By Poles - Used to create a spline that is defined by using the average of selected
points.
Chamfer feature advantage - Your model history will have fewer features when created
in a sketch.
Change the Cap Option to Arc Cap - The action to switch from sharp corners to a radius
corner based off the offset value when creating an offset curve.
Clearance set definition - Defined with two collections to reduce the number of checks
the software needs to perform
Closed set of 2D curves - Required to create a Bounded Plane.
Color-coding assembly - One of the reasons you use Visual Reporting to summarize a
specific condition
Combine - Does not use Target Body and Tool Body selections.
Constraint Navigator - Where can you look to get information about an assembly's
constraints? - The Constraint Navigator.
Construction Geometry - Not a default reference set display condition that you can use
for each component or sub-assembly
Continuous Auto Dimensioning - When dimensions are created automatically as you
sketch.
Create a Basic Drawing - To create a basic drawing in NX, go to File, then New. In the
top panel of the pop-up screen, find Drawing and click it.
Create a pattern in a sketch - What command is used to create a pattern in a sketch?
