1|Page
SACA 210 Study Questions with 100% Correct
Answers
A mechanical power transmission system receives power from
__________.
a. Driven
b. Driver
c. Prime Mover
d. B and C - ANSWER d. B and C
A machine foundation should be designed to support the load
of the machine, maintain the alignment of coupled
components, and _________________.
a. be easily moved
b. be lightweight
c. blend with the other foundations
d. absorb any vibration created by the machine - ANSWER d.
absorb any vibration created by the machine
,2|Page
__________ may remove a lockout on the power source of a
piece of mechanical equipment.
a. Only the instructor
b. Any two people
c. Only the person who installed the lockout
d. Any person familiar with the mechanical equipment -
ANSWER c. Only the person who installed the lockout
In addition to dress rules, another rule to follow with machinery
is __________.
a. to have someone else in the work area
b. enter a work area while the machine is running
c. do not work on wet floors
d. to keep work tools out in the work area for easy access -
ANSWER c. do not work on wet floors
A device most often used to orient a surface so it is either
parallel or perpendicular to the ground is a __________.
,3|Page
a. Measuring tape
b. Spirit level
c. Plumb bob
d. Speed Square - ANSWER b. Spirit level
Some rules for safe dress to wear around machinery when it is
running are __________.
a. wear safety glasses and gloves at all times
b. wear tight fitting clothing and heavy duty shoes
c. wear bright colored clothing
d. wear light weight, loose fitting clothing - ANSWER b. wear
tight fitting clothing and heavy duty shoes
A spirit level can be used __________.
a.
in a vertical or horizontal position
b.
only in the vertical position
c.
, 4|Page
only in the horizontal position
d.
in any position - ANSWER a.
in a vertical or horizontal position
The three types of shaft-to-adjacent-shaft power transmission
are __________.
a.
belt drive, clutch, and gear drive
b.
clutch, direct coupling, and gear drive
c.
belt drive, chain drive, and gear drive
d.
flexible coupling, direct coupling, and sleeve coupling - ANSWER
c.
belt drive, chain drive, and gear drive
The purpose of having a clutch connecting two shafts together
is to __________.
SACA 210 Study Questions with 100% Correct
Answers
A mechanical power transmission system receives power from
__________.
a. Driven
b. Driver
c. Prime Mover
d. B and C - ANSWER d. B and C
A machine foundation should be designed to support the load
of the machine, maintain the alignment of coupled
components, and _________________.
a. be easily moved
b. be lightweight
c. blend with the other foundations
d. absorb any vibration created by the machine - ANSWER d.
absorb any vibration created by the machine
,2|Page
__________ may remove a lockout on the power source of a
piece of mechanical equipment.
a. Only the instructor
b. Any two people
c. Only the person who installed the lockout
d. Any person familiar with the mechanical equipment -
ANSWER c. Only the person who installed the lockout
In addition to dress rules, another rule to follow with machinery
is __________.
a. to have someone else in the work area
b. enter a work area while the machine is running
c. do not work on wet floors
d. to keep work tools out in the work area for easy access -
ANSWER c. do not work on wet floors
A device most often used to orient a surface so it is either
parallel or perpendicular to the ground is a __________.
,3|Page
a. Measuring tape
b. Spirit level
c. Plumb bob
d. Speed Square - ANSWER b. Spirit level
Some rules for safe dress to wear around machinery when it is
running are __________.
a. wear safety glasses and gloves at all times
b. wear tight fitting clothing and heavy duty shoes
c. wear bright colored clothing
d. wear light weight, loose fitting clothing - ANSWER b. wear
tight fitting clothing and heavy duty shoes
A spirit level can be used __________.
a.
in a vertical or horizontal position
b.
only in the vertical position
c.
, 4|Page
only in the horizontal position
d.
in any position - ANSWER a.
in a vertical or horizontal position
The three types of shaft-to-adjacent-shaft power transmission
are __________.
a.
belt drive, clutch, and gear drive
b.
clutch, direct coupling, and gear drive
c.
belt drive, chain drive, and gear drive
d.
flexible coupling, direct coupling, and sleeve coupling - ANSWER
c.
belt drive, chain drive, and gear drive
The purpose of having a clutch connecting two shafts together
is to __________.
