BMW associates Test UPDATED ACTUAL Questions and CORRECT
Answers
if car is driving and it pulls right ( right caliper seized)
If car is braking and it pulls right ( left caliper seized )
power steering leaks replace rack and pinion. Tech A do
both
you flush the system? Tech B do you need alignment?
continuity, shows OL means it's an open
engine bolts, aluminum or steel, replace or reuse? use in replace aluminum bolts and aluminum bolts CAN NOT be
place of? Replace bolts and never use aluminum with steel used with any other material
improper tie rod adjustment wander and clunking
caliper seizing, accelerate goes left, braking goes right left brake caliper is seized
wiring diagrams, high resistance, excessive voltage drop,
no , tech b
will mirrors work if the door switch is disconnected?
. V to MV(4v=4000mv move 3 to right)mv to
V(240mv=0.240 move 3 to the left)ohms to K
V and Ohms conversion
ohms(420ohms=.420k ohms)k ohms to ohms(10,000k
ohms=10,000ohms)x1000
swollen brake fluid cap corrosion/contamination
adhesive on brake pad to piston, replace each time? install They are one time use and are used to hold brake onto
by pressing brake pad? piston
OSHA protection agency
number on bolt? is it strength? diameter? length? it's going to be the strength of the bolt
hears thump on speed bumps worn shock mounts(i think) let me know if wrong
brake service, 2000mi, brake pulsation improper lug torque
tire feathering, if it's toe. caster measurement is from the side
charging AGM battery, what's the voltage
14.5 or 14.8(its 14.8)
14.8? 14.5? 14.2,13.5
flush on DSC system car is on KL15
Answers
if car is driving and it pulls right ( right caliper seized)
If car is braking and it pulls right ( left caliper seized )
power steering leaks replace rack and pinion. Tech A do
both
you flush the system? Tech B do you need alignment?
continuity, shows OL means it's an open
engine bolts, aluminum or steel, replace or reuse? use in replace aluminum bolts and aluminum bolts CAN NOT be
place of? Replace bolts and never use aluminum with steel used with any other material
improper tie rod adjustment wander and clunking
caliper seizing, accelerate goes left, braking goes right left brake caliper is seized
wiring diagrams, high resistance, excessive voltage drop,
no , tech b
will mirrors work if the door switch is disconnected?
. V to MV(4v=4000mv move 3 to right)mv to
V(240mv=0.240 move 3 to the left)ohms to K
V and Ohms conversion
ohms(420ohms=.420k ohms)k ohms to ohms(10,000k
ohms=10,000ohms)x1000
swollen brake fluid cap corrosion/contamination
adhesive on brake pad to piston, replace each time? install They are one time use and are used to hold brake onto
by pressing brake pad? piston
OSHA protection agency
number on bolt? is it strength? diameter? length? it's going to be the strength of the bolt
hears thump on speed bumps worn shock mounts(i think) let me know if wrong
brake service, 2000mi, brake pulsation improper lug torque
tire feathering, if it's toe. caster measurement is from the side
charging AGM battery, what's the voltage
14.5 or 14.8(its 14.8)
14.8? 14.5? 14.2,13.5
flush on DSC system car is on KL15
