OECP EXAM PRACTICE FLASHCARDS
EXAM WITH CORRECT ACTUAL
QUESTIONS AND CORRECTLY WELL
DEFINED ANSWERS LATEST ALREADY
GRADED A+ 2025 – 2026
What is the ANSI/ASME standard for construction cranes? -
ANSWERS-B30.5
What must walking/stepping services on cranes have? -
ANSWERS-Slip resistant features/properties such as
diamond plate, metal grip tape, expanded metal and or slip
resistant paint
Who is to ensure that all ground preparations meet
1926.1402 standards? - ANSWERS-The controlling entity
,Do cranes always have to have steps and hold ladders,
guard, rails and or grab rails? - ANSWERS-Only if originally
equipped from manufacturer or all cranes built after
November 8, 2011
Hand signals must use what method? - ANSWERS-Standard
method
An operator must obey a stop signal from who? - ANSWERS-
Anyone
When using radio, telephone or electronic signals receiving,
must be what? - ANSWERS-Hands free
What must voice signals include? - ANSWERS-Function and
direction - distance and speed - function and stop
What is the minimum number of wraps on a drum? -
ANSWERS-2
Most LMI's will not indicate? - ANSWERS-Levelness
,All directions must be given in the operators what? -
ANSWERS-Perspective
If signals are interrupted, the operator must do what? -
ANSWERS-Stop safely
What are the ANSI/ASME audible signals? - ANSWERS-1.
Stop
2. Forward
3. Reverse
What type of fire extinguisher is required on a crane? -
ANSWERS-10BC
What should an operator do in the event of power line
contact? - ANSWERS-Remain in the machine unless fire or
emergency
What is minimum distance from a powerline under 350 kV?
- ANSWERS-20 feet
Where must electrocution warnings be displayed? -
ANSWERS-1 in the cab & 2 on the outside
, A boom angle indicator does not show what? - ANSWERS-
Boom deflection
When can an LMI be used to weigh load? - ANSWERS-Up to
75% of capacity at the working radius
What is the correct procedure if an LMI fails? - ANSWERS-
Use the load chart and boom angle unless not allowed by
the manufacturer
What functions are disabled by kick out system? -
ANSWERS-Hoist up, boom down, telescope out
Power lines are always presumed what? - ANSWERS-
Energized
Describe horn beeps when they are used as audible signals -
ANSWERS-1 beep = stop
2 beeps = pull forward
3 beeps = back up
EXAM WITH CORRECT ACTUAL
QUESTIONS AND CORRECTLY WELL
DEFINED ANSWERS LATEST ALREADY
GRADED A+ 2025 – 2026
What is the ANSI/ASME standard for construction cranes? -
ANSWERS-B30.5
What must walking/stepping services on cranes have? -
ANSWERS-Slip resistant features/properties such as
diamond plate, metal grip tape, expanded metal and or slip
resistant paint
Who is to ensure that all ground preparations meet
1926.1402 standards? - ANSWERS-The controlling entity
,Do cranes always have to have steps and hold ladders,
guard, rails and or grab rails? - ANSWERS-Only if originally
equipped from manufacturer or all cranes built after
November 8, 2011
Hand signals must use what method? - ANSWERS-Standard
method
An operator must obey a stop signal from who? - ANSWERS-
Anyone
When using radio, telephone or electronic signals receiving,
must be what? - ANSWERS-Hands free
What must voice signals include? - ANSWERS-Function and
direction - distance and speed - function and stop
What is the minimum number of wraps on a drum? -
ANSWERS-2
Most LMI's will not indicate? - ANSWERS-Levelness
,All directions must be given in the operators what? -
ANSWERS-Perspective
If signals are interrupted, the operator must do what? -
ANSWERS-Stop safely
What are the ANSI/ASME audible signals? - ANSWERS-1.
Stop
2. Forward
3. Reverse
What type of fire extinguisher is required on a crane? -
ANSWERS-10BC
What should an operator do in the event of power line
contact? - ANSWERS-Remain in the machine unless fire or
emergency
What is minimum distance from a powerline under 350 kV?
- ANSWERS-20 feet
Where must electrocution warnings be displayed? -
ANSWERS-1 in the cab & 2 on the outside
, A boom angle indicator does not show what? - ANSWERS-
Boom deflection
When can an LMI be used to weigh load? - ANSWERS-Up to
75% of capacity at the working radius
What is the correct procedure if an LMI fails? - ANSWERS-
Use the load chart and boom angle unless not allowed by
the manufacturer
What functions are disabled by kick out system? -
ANSWERS-Hoist up, boom down, telescope out
Power lines are always presumed what? - ANSWERS-
Energized
Describe horn beeps when they are used as audible signals -
ANSWERS-1 beep = stop
2 beeps = pull forward
3 beeps = back up
