NCCER MODULE 4 INTRODUCTION TO POWER TOOLS | QUESTIONS
AND ANSWERS | VERIFIED ANSWERS (100% CORRECT) | LATEST
EXAM UPDATE
A saw that has a thin one-piece blade that runs around guides, that runs around
either end of the saw is a - CORRECT ANSWER - Band saw
A power miter saw combines a miter box with a - CORRECT ANSWER - Circular
saw
An angle grinder is used to grind - CORRECT ANSWER - Hard heavy materials
The adjustable tool rest on a bench grinder should be positioned - CORRECT
ANSWER - One eighth of an inch from the grinding tool
A good way to check the condition of the grinding wheel on a bench grinder is to -
CORRECT ANSWER - Perform a ring test
A grinder can catch on rough material edges and shift around, especially when
using rotary bits called - CORRECT ANSWER - Burr bits
When using power tools never engage the - CORRECT ANSWER - Trigger locks
Before replacing parts such as bits, blades, or discs on any tool, you must -
CORRECT ANSWER - Disconnect the power source
, Most hammer drills will not hammer until - CORRECT ANSWER - Pressure is
applied to the drill bit
A pneumatic drill is commonly used when - CORRECT ANSWER - There is no
electricity
Never use a circular saw that does not have a blade guard because - CORRECT
ANSWER - The guard protects you from touching the blade.
When using a circular saw be sure to - CORRECT ANSWER - Cut on the waist side
of the cut mark to allow for the blades kerf.
Saws with fine blades that are excellent for delicate and intricate cutting are called
- CORRECT ANSWER - Saber saws
A Porta-Power is an example of a - CORRECT ANSWER - Hydraulic tool
A power tool that is a well suited for breaking up concrete during demolition work
is a - CORRECT ANSWER - Pavement breaker
If a pneumatic nailer is not firing properly before attempting repairs be sure to -
CORRECT ANSWER - Disconnect the air hose
Before using a pneumatically powered nailer for the first time, it is important to -
CORRECT ANSWER - Read the manufacturer's instructions
AND ANSWERS | VERIFIED ANSWERS (100% CORRECT) | LATEST
EXAM UPDATE
A saw that has a thin one-piece blade that runs around guides, that runs around
either end of the saw is a - CORRECT ANSWER - Band saw
A power miter saw combines a miter box with a - CORRECT ANSWER - Circular
saw
An angle grinder is used to grind - CORRECT ANSWER - Hard heavy materials
The adjustable tool rest on a bench grinder should be positioned - CORRECT
ANSWER - One eighth of an inch from the grinding tool
A good way to check the condition of the grinding wheel on a bench grinder is to -
CORRECT ANSWER - Perform a ring test
A grinder can catch on rough material edges and shift around, especially when
using rotary bits called - CORRECT ANSWER - Burr bits
When using power tools never engage the - CORRECT ANSWER - Trigger locks
Before replacing parts such as bits, blades, or discs on any tool, you must -
CORRECT ANSWER - Disconnect the power source
, Most hammer drills will not hammer until - CORRECT ANSWER - Pressure is
applied to the drill bit
A pneumatic drill is commonly used when - CORRECT ANSWER - There is no
electricity
Never use a circular saw that does not have a blade guard because - CORRECT
ANSWER - The guard protects you from touching the blade.
When using a circular saw be sure to - CORRECT ANSWER - Cut on the waist side
of the cut mark to allow for the blades kerf.
Saws with fine blades that are excellent for delicate and intricate cutting are called
- CORRECT ANSWER - Saber saws
A Porta-Power is an example of a - CORRECT ANSWER - Hydraulic tool
A power tool that is a well suited for breaking up concrete during demolition work
is a - CORRECT ANSWER - Pavement breaker
If a pneumatic nailer is not firing properly before attempting repairs be sure to -
CORRECT ANSWER - Disconnect the air hose
Before using a pneumatically powered nailer for the first time, it is important to -
CORRECT ANSWER - Read the manufacturer's instructions
