General crane safety Exam Questions with correct Answers 2025/2026( A+ GRADED 100% VERIFIED).

General crane safety Exam Questions
with correct Answers 2025/2026( A+
GRADED 100% VERIFIED).
A commercial truck mounted crane with a capacity of 14,000 pounds is
a______crane.
A) Category 1
B) Category 2
C) Category 3
D) Category 4 - ANSWER: D) Category 4

A crane accident occurs when any element of the crane operating envelope fails to
perform correctly during crane operations, maintenance, or testing which could result
in any of the following except-
A) Two-Blocking or Overload
B) Personnel Injury or Death
C) Dropped Load or Damage
D) Collision or Derailment
E) Equipment malfunction - ANSWER: E) Equipment malfunction

A floating crane with a capacity of 200,000 pounds is a ________crane.
A) Category 1
B) Category 2
C) Category 3
D) Category 4 - ANSWER: A) Category 1

A monorail hoist with less than 20,000 pounds capacity is a crane.
A) Category 1
B) Category 2
C) Category 3
D) Category 4 - ANSWER: A) Category 1

A pillar-jib crane with a capacity of 22,000 pounds is a crane.
A) Category 1
B) Category 2
C) Category 3
D) Category 4 - ANSWER: B) Category 2

A portal crane with a capacity of 120,000 pounds is a crane.
A) Category 1

,B) Category 2
C) Category 3
D) Category 4 - ANSWER: A) Category 1

A rubber-tired gantry crane with a capacity of 16,000 pounds is a crane.
A) Category 1
B) Category 2
C) Category 3
D) Category 4 - ANSWER: A) Category 1

All of the following are principle parts of an overhead traveling crane EXCEPT-
A) Operator's cab or pendant control
B) End trucks
C) Shackles and eyebolts
D) Bridge girders
E) Trolley with hoisting mechanism - ANSWER: C) Shackles and eyebolts

All of the following require a license to operate EXCEPT a(n)-
A) Cab-operated category 3 bridge crane
B) Mobile hydraulic truck crane
C) Non-cab operated category 3 bridge crane
D) Articulating boom category 4 crane
E) Floor-operated category 2 bridge crane - ANSWER: C) Non-cab operated
category 3 bridge crane

An OET Bridge crane with a capacity of 80,000 pounds is a crane.
A) Category 1
B) Category 2
C) Category 3
D) Category 4 - ANSWER: C) Category 3

An OET Bridge crane with a rated capacity of 16,000 pounds is a__________crane.
A) Category 1
B) Category 2
C) Category 3
D) Category 4 - ANSWER: B) Category 2

Bridge crane with rated capacities of 20,000 pounds or greater are classified
as_______cranes.
A) Category 1
B) Category 2
C) Category 3
D) Category 4 - ANSWER: B) Category 2

, Bridge cranes with rated capacities of less than 20,000 pounds are classified as
cranes.
A) Category 1
B) Category 2
C) Category 3
D) Category 4 - ANSWER: C) Category 3

Commercial truck-mounted cranes having telescoping or articulating booms and a
capacity of less than 2,000 pounds are classified as
cranes.
A) Category 1
B) Category 2
C) Category 3
D) Category 4 - ANSWER: A) Category 1

Common modes of operation for typical OET bridge cranes are
A) skew, hoist, and bridge
B) hoist, trolley, and bridge
C) travel, rotate, and hoist
D) hoist, luffing, and trolley
E) bridge, rotate, and extend - ANSWER: B) hoist, trolley, and bridge

Components that affect the safety and capability of the Weight Handling Equipment
by stopping or limiting the operation when activated are
A) operational safety devices
B) general safety devices
C) alterations and/or modifications
D) load bearing parts
E) load controlling parts - ANSWER: A) operational safety devices

Components that control, restrain, or position the load and upon failure W would
cause dropping, shifting, or uncontrolled movement of the load are
A) Alterations and/or modifications
B) Operational safety devices
C) Load bearing parts
D) Load controlling parts
E) General safety devices - ANSWER: D) Load controlling parts

Components that provide protection for operation and maintenance personnel
working on or in the path of cranes are?
A) Operational Safety Devices
B) Alterations/Modifications
C) Load Controlling Parts
D) Load Bearing Parts