CSX Quiz 3 with Accurate Answers
a valve located at each end of a locomotive or car used to open or close the brake
pipe correct answer Angle Cock
Activation fail correct answer blinking lights fail to turn on
An air supply used in yards; to charge the train air brake systems for testing
purposes correct answer Yard line
Before performing an roll by inspection to verify the air brakes where released
during a class one inspection, do both sides of your train have to be inspected?
correct answer Yes
BRAKE TEST CERTIFICATE correct answer
False or partial activation, what do u do? correct answer Proceed with caution 15
mph
Fasle activation correct answer down and no train is coming
for unattended fusees near the track what do u do? correct answer Reduce to
restricted speed for 15 minutes
How many hours will a Class One Brake test once your train is off air? correct
answer 24 Hours
, How many working air breaks must you have when performing a Class One Brake
test? correct answer Each
If you retest a care air brakes, how long does the brake have to stay applied?
correct answer Three Minutes
In addition to the lead locomotive; where else are you required to have six red
fusees and red flags? correct answer Shoving plateform, Loaded cabooses
Prior to performing and air brake test; what must you make certain of? correct
answer Angle cocks, end cocks, & cut out cocks are properly in position & Air
hoses are in serviceable condition and properly coupled
T/F Before cars, not previously tested, are added to a train at an intermediate
location they must have a class one brake test correct answer True
T/F The standard brake pipe pressure for trains is ? correct answer 90 psi
T/F When notified by the mechanical department that the emergency capability is
_____________ passed a _____ test no further investigating is required? correct
answer True
T/F When performing a Class One Brake test, you must make sure that the brakes
apply and release on each car. correct answer True
Telemetry can be use to perform air brake checks and to meet 2 way equipment
requirements when which of the following conditions prevent? correct answer 1.)
The controlling Locomotive have an HTD.
a valve located at each end of a locomotive or car used to open or close the brake
pipe correct answer Angle Cock
Activation fail correct answer blinking lights fail to turn on
An air supply used in yards; to charge the train air brake systems for testing
purposes correct answer Yard line
Before performing an roll by inspection to verify the air brakes where released
during a class one inspection, do both sides of your train have to be inspected?
correct answer Yes
BRAKE TEST CERTIFICATE correct answer
False or partial activation, what do u do? correct answer Proceed with caution 15
mph
Fasle activation correct answer down and no train is coming
for unattended fusees near the track what do u do? correct answer Reduce to
restricted speed for 15 minutes
How many hours will a Class One Brake test once your train is off air? correct
answer 24 Hours
, How many working air breaks must you have when performing a Class One Brake
test? correct answer Each
If you retest a care air brakes, how long does the brake have to stay applied?
correct answer Three Minutes
In addition to the lead locomotive; where else are you required to have six red
fusees and red flags? correct answer Shoving plateform, Loaded cabooses
Prior to performing and air brake test; what must you make certain of? correct
answer Angle cocks, end cocks, & cut out cocks are properly in position & Air
hoses are in serviceable condition and properly coupled
T/F Before cars, not previously tested, are added to a train at an intermediate
location they must have a class one brake test correct answer True
T/F The standard brake pipe pressure for trains is ? correct answer 90 psi
T/F When notified by the mechanical department that the emergency capability is
_____________ passed a _____ test no further investigating is required? correct
answer True
T/F When performing a Class One Brake test, you must make sure that the brakes
apply and release on each car. correct answer True
Telemetry can be use to perform air brake checks and to meet 2 way equipment
requirements when which of the following conditions prevent? correct answer 1.)
The controlling Locomotive have an HTD.
