, TESTBANK for Joint Structure and Function A
Comprehensive Analysis 6th Edition Pamela K.
Levangie
Notes
1- The file is chapter after chapter.
2- We have shown you few pages sample.
3- The file contains all Appendix and Excel sheet
if it exists.
4- We have all what you need, we make update
at every time. There are many new editions
waiting you.
5- If you think you purchased the wrong file You
can contact us at every time, we can replace it
with true one.
Our email:
,Chapter 1: Biomechanical Applications to Joint Structure and Function
Multiple Choice
1. When you raise a cup to your mouth, a ____________________ of motion occurs at the elbow
joint.
A. rotation only
B. translation only
C. translation and rotation
D. None of the above answers are correct.
ANS: C
Rationale: Rotatory and translatory motions in the human body most commonly occur together.
2. Hip abduction from an anatomic position would occur in which plane?
A. Sagittal
B. Frontal
C. Transverse
D. Horizontal
ANS: B
Rationale: The frontal (coronal) plane divides the body into front and back halves. Movements in
this plane occur side to side, such as the case in abduction of the hip.
3. Which of the following describes the phenomenon that when two forces come in contact, the
second force will respond to the contact by the first force with equal magnitude and in the
opposite direction?
A. Law of Inertia
B. Law of Reaction
C. Law of Acceleration
D. None of the above answers are correct.
ANS: B
,4. A ____________________ class lever is described by the fulcrum occurring at one end,
followed by the resistance (load or weight) and then the force (effort).
A. First
B. Second
C. Third
D. Fourth
ANS: B
5. In what type of lever is the Mechanical Advantage always less than one?
A. First
B. Second
C. Third
D. Fourth
ANS: C
Rationale: A mechanical advantage less than one occurs when the effort moment arm is shorter
than the resistance moment arm. This is always the case in a third-class level if all forces are
equal.
6. Which of the following best describes torque?
A. The force a muscle generates
B. A force times the perpendicular distance from the line of force to the axis of rotation
C. A force times the distance measured along the lever from the line of force to the axis of
rotation
D. The distance a muscle can move
ANS: B
Rationale: Torque equals force times the distance of the force to the axis. The distance must be
represented by the moment arm of the force, not just the direct distance as measured up the lever.
The moment arm is the perpendicular distance of the line of the force from the axis of rotation.
Copyright © 2019 by F. A. Davis Company
,NARRBEGIN: Figure 1-7
NARREND
7. In Figure 1-7, the biceps is acting on the forearm. What is the force of the biceps, FB, given the
following: moment arm of the biceps, d = 0.02 m and torque due to the biceps, TM = –5 Nm?
A. –0.1 N
B. 1,250 N
C. 5 N
D. –250 N
ANS: D
Rationale: Because T = (F) (MA) therefore, F= T/MA: (–)5 Nm/0.02 m = (–)250 N. The negative
sign is used to show direction of the force. Due to the small moment arm, the force necessary to
produce (–)5 Nm of torque is quite large.
NAR: Figure 1-7
8. As your patient abducts her shoulder from 90° to 120°, the moment arm of the muscle
decreases. If the torque from the deltoid remains constant, the force of the deltoid would
____________________ as the shoulder is abducted.
A. remain the same
B. increase
C. decrease
Copyright © 2019 by F. A. Davis Company
,D. become 0 N
ANS: B
Rationale: If the torque were to remain the same, the force would have to increase as the
muscle’s moment arm decreases. Force and moment arm have an inverse relationship if torque is
to remain constant.
NARRBEGIN: Figure 1-9
A
B C D
NARREND
9. In Figure 1-9, at which position does the weight have the greatest torque capabilities on the
knee joint?
A. A
B. B
C. C
D. D
ANS: D
Rationale: The force of the weight did not change from position to position; therefore, position D
would have the greatest torque capabilities due to this position offering the largest moment arm
of the weight on the lever.
NAR: Figure 1-9
10. In Figure 1-9, at which position does the weight produce the greatest distractive force on the
Copyright © 2019 by F. A. Davis Company
,knee joint?
A. A
B. B
C. C
D. D
ANS: A
Rationale: When the line of force is parallel with the moving segment, it will create either a
distractive or compressive force between the two bony segments. Distraction occurs when there
is a pull or movement of one bony segment away from another. Because the weight would be
moving the tibia away from the femur, it will create a distractive force.
NAR: Figure 1-9
NARRBEGIN: Figure 1-11
NARREND
11. Which of the following represents the magnitude of each of the two component forces of the
resultant, FR, in Figure 1-11?
A. F1 = 86.6 N, F2 = 50 N
B. F1 = 50 N, F2 = 60 N
C. F1 = 10 N, F2 = 90 N
D. F1 = 20.6 N, F2 = 79.4 N
ANS: A
Rationale: Sin 60 = 0.866 multiplied by the force of 100 N = 86.6 N, and Cos 60 = 0.05
multiplied by the force of 100 N = 50 N.
NAR: Figure 1-11
Copyright © 2019 by F. A. Davis Company
,12. Which of the following describes the phenomenon that causes a body moving at a constant
speed to remain at that speed, unless it is acted upon by another body or force?
A. Impulse
B. Energy level
C. Law of Reaction
D. Law of Inertia
ANS: D
Rationale: Newton’s Law of Inertia addresses the conditions under which an object will be in
equilibrium.
13. Which of the following statements describes the relationship between joint reaction forces
and the translational/rotatory component forces?
A. The contact force and translation component force run parallel to each other.
B. The contact force and rotatory component force run parallel to each other.
C. The shear force and translation component force run parallel to each other.
ANS: A
Rationale: The contact force runs perpendicular to the joint surface which is in the same plane as
the lever. The translational force runs parallel with the lever; therefore, these two forces run
parallel to each other.
True/False
14. When the centers of mass (CoM) of two adjacent segments are combined, the combined CoM
will be located somewhere along a line connecting the two individual CoMs.
A. True
B. False
ANS: A
15. The relative line of gravity changes with changes in body position.
Copyright © 2019 by F. A. Davis Company
,A. True
B. False
ANS: A
Rationale: The human body can be considered as a single rigid object. Even though the center of
gravity does not change based on position, the relative line of gravity will shift so that it remains
vertically downward.
Short Answer
16. Is naming the plane of motion considered part of kinetics or kinematics? Why?
ANS: Kinematics. It is purely a description of motion without regard to the forces causing it.
17. What happens to the center of gravity (CoG) of the body when the body segments are
rearranged? What happens to the CoG if the right upper extremity is amputated?
ANS: (1) The CoG shifts in the direction(s) of the location of the segments with the greatest
mass. (2) The CoG shifts down and to the left once the mass of the right arm is removed, because
the lower and left halves of the body are now relatively heavier.
18. A student is carrying all his books for his Fall semester courses (first year) in his right arm.
What does the additional weight do to the combined center of gravity (CoG) of body and books?
How will his body most likely respond to this change?
ANS: The center of gravity (for body and books) will be higher and to the right of S2. Because
this new location of the CoG would bring the line of gravity (LoG) to the right side of his base of
support, he will lean to the left to bring the LoG back to the middle of the base of support (most
stable place). The shift in the CoG is unavoidable. The shift of the LoG is an automatic
adaptation but under some volitional control.
Copyright © 2019 by F. A. Davis Company
, 19. Upon what variables is the magnitude of friction dependent?
ANS: The magnitude of friction is dependent upon (1) the magnitude of contact between the two
surfaces on which the friction is occurring—increased contact increases the maximum value of
static friction or the absolute value of kinetic friction; (2) the nature of the contacting surfaces—
the rougher one or both of the surfaces (increased coefficient of static or kinetic friction), the
greater is the maximum value of static friction or the absolute value of kinetic friction; and (3)
the shear force(s) on the objects—friction has magnitude only when there is attempted motion
(static friction) or actual motion (kinetic friction) between the two surfaces—the magnitude of
friction on a static object will always equal the net shear force on that object; the magnitude of
friction on a moving object is always the product of the contact force and the coefficient of
kinetic friction.
20. What kind of force system do the fibers within a pennate muscle form? Explain.
ANS: Concurrent. Each fiber represents a separate force vector with the same general point of
application but which pulls at an angle to each other.
21. How do you determine the net effect of two muscle pulls applied to the same spot? What is
this process called?
ANS: You find the resultant pull of the two forces by drawing the two forces, creating a
parallelogram by adding sides parallel to each of the forces, and drawing a diagonal within the
parallelogram. The resultant is the diagonal with its point of application at the original source
and whose arrow head (limit of magnitude) is at the opposite corner of the parallelogram. This is
called composition of forces.
22. Explain how anatomical pulleys affect the magnitude and direction of a muscle force (Fms).
ANS: Anatomical pulleys (always single pulleys) do not affect the magnitude of Fms but do
change the direction of pull. The change in action line generally brings the action line away from
the joint axis, thus increasing the moment arm or rotatory component of the applied force.
Copyright © 2019 by F. A. Davis Company
Comprehensive Analysis 6th Edition Pamela K.
Levangie
Notes
1- The file is chapter after chapter.
2- We have shown you few pages sample.
3- The file contains all Appendix and Excel sheet
if it exists.
4- We have all what you need, we make update
at every time. There are many new editions
waiting you.
5- If you think you purchased the wrong file You
can contact us at every time, we can replace it
with true one.
Our email:
,Chapter 1: Biomechanical Applications to Joint Structure and Function
Multiple Choice
1. When you raise a cup to your mouth, a ____________________ of motion occurs at the elbow
joint.
A. rotation only
B. translation only
C. translation and rotation
D. None of the above answers are correct.
ANS: C
Rationale: Rotatory and translatory motions in the human body most commonly occur together.
2. Hip abduction from an anatomic position would occur in which plane?
A. Sagittal
B. Frontal
C. Transverse
D. Horizontal
ANS: B
Rationale: The frontal (coronal) plane divides the body into front and back halves. Movements in
this plane occur side to side, such as the case in abduction of the hip.
3. Which of the following describes the phenomenon that when two forces come in contact, the
second force will respond to the contact by the first force with equal magnitude and in the
opposite direction?
A. Law of Inertia
B. Law of Reaction
C. Law of Acceleration
D. None of the above answers are correct.
ANS: B
,4. A ____________________ class lever is described by the fulcrum occurring at one end,
followed by the resistance (load or weight) and then the force (effort).
A. First
B. Second
C. Third
D. Fourth
ANS: B
5. In what type of lever is the Mechanical Advantage always less than one?
A. First
B. Second
C. Third
D. Fourth
ANS: C
Rationale: A mechanical advantage less than one occurs when the effort moment arm is shorter
than the resistance moment arm. This is always the case in a third-class level if all forces are
equal.
6. Which of the following best describes torque?
A. The force a muscle generates
B. A force times the perpendicular distance from the line of force to the axis of rotation
C. A force times the distance measured along the lever from the line of force to the axis of
rotation
D. The distance a muscle can move
ANS: B
Rationale: Torque equals force times the distance of the force to the axis. The distance must be
represented by the moment arm of the force, not just the direct distance as measured up the lever.
The moment arm is the perpendicular distance of the line of the force from the axis of rotation.
Copyright © 2019 by F. A. Davis Company
,NARRBEGIN: Figure 1-7
NARREND
7. In Figure 1-7, the biceps is acting on the forearm. What is the force of the biceps, FB, given the
following: moment arm of the biceps, d = 0.02 m and torque due to the biceps, TM = –5 Nm?
A. –0.1 N
B. 1,250 N
C. 5 N
D. –250 N
ANS: D
Rationale: Because T = (F) (MA) therefore, F= T/MA: (–)5 Nm/0.02 m = (–)250 N. The negative
sign is used to show direction of the force. Due to the small moment arm, the force necessary to
produce (–)5 Nm of torque is quite large.
NAR: Figure 1-7
8. As your patient abducts her shoulder from 90° to 120°, the moment arm of the muscle
decreases. If the torque from the deltoid remains constant, the force of the deltoid would
____________________ as the shoulder is abducted.
A. remain the same
B. increase
C. decrease
Copyright © 2019 by F. A. Davis Company
,D. become 0 N
ANS: B
Rationale: If the torque were to remain the same, the force would have to increase as the
muscle’s moment arm decreases. Force and moment arm have an inverse relationship if torque is
to remain constant.
NARRBEGIN: Figure 1-9
A
B C D
NARREND
9. In Figure 1-9, at which position does the weight have the greatest torque capabilities on the
knee joint?
A. A
B. B
C. C
D. D
ANS: D
Rationale: The force of the weight did not change from position to position; therefore, position D
would have the greatest torque capabilities due to this position offering the largest moment arm
of the weight on the lever.
NAR: Figure 1-9
10. In Figure 1-9, at which position does the weight produce the greatest distractive force on the
Copyright © 2019 by F. A. Davis Company
,knee joint?
A. A
B. B
C. C
D. D
ANS: A
Rationale: When the line of force is parallel with the moving segment, it will create either a
distractive or compressive force between the two bony segments. Distraction occurs when there
is a pull or movement of one bony segment away from another. Because the weight would be
moving the tibia away from the femur, it will create a distractive force.
NAR: Figure 1-9
NARRBEGIN: Figure 1-11
NARREND
11. Which of the following represents the magnitude of each of the two component forces of the
resultant, FR, in Figure 1-11?
A. F1 = 86.6 N, F2 = 50 N
B. F1 = 50 N, F2 = 60 N
C. F1 = 10 N, F2 = 90 N
D. F1 = 20.6 N, F2 = 79.4 N
ANS: A
Rationale: Sin 60 = 0.866 multiplied by the force of 100 N = 86.6 N, and Cos 60 = 0.05
multiplied by the force of 100 N = 50 N.
NAR: Figure 1-11
Copyright © 2019 by F. A. Davis Company
,12. Which of the following describes the phenomenon that causes a body moving at a constant
speed to remain at that speed, unless it is acted upon by another body or force?
A. Impulse
B. Energy level
C. Law of Reaction
D. Law of Inertia
ANS: D
Rationale: Newton’s Law of Inertia addresses the conditions under which an object will be in
equilibrium.
13. Which of the following statements describes the relationship between joint reaction forces
and the translational/rotatory component forces?
A. The contact force and translation component force run parallel to each other.
B. The contact force and rotatory component force run parallel to each other.
C. The shear force and translation component force run parallel to each other.
ANS: A
Rationale: The contact force runs perpendicular to the joint surface which is in the same plane as
the lever. The translational force runs parallel with the lever; therefore, these two forces run
parallel to each other.
True/False
14. When the centers of mass (CoM) of two adjacent segments are combined, the combined CoM
will be located somewhere along a line connecting the two individual CoMs.
A. True
B. False
ANS: A
15. The relative line of gravity changes with changes in body position.
Copyright © 2019 by F. A. Davis Company
,A. True
B. False
ANS: A
Rationale: The human body can be considered as a single rigid object. Even though the center of
gravity does not change based on position, the relative line of gravity will shift so that it remains
vertically downward.
Short Answer
16. Is naming the plane of motion considered part of kinetics or kinematics? Why?
ANS: Kinematics. It is purely a description of motion without regard to the forces causing it.
17. What happens to the center of gravity (CoG) of the body when the body segments are
rearranged? What happens to the CoG if the right upper extremity is amputated?
ANS: (1) The CoG shifts in the direction(s) of the location of the segments with the greatest
mass. (2) The CoG shifts down and to the left once the mass of the right arm is removed, because
the lower and left halves of the body are now relatively heavier.
18. A student is carrying all his books for his Fall semester courses (first year) in his right arm.
What does the additional weight do to the combined center of gravity (CoG) of body and books?
How will his body most likely respond to this change?
ANS: The center of gravity (for body and books) will be higher and to the right of S2. Because
this new location of the CoG would bring the line of gravity (LoG) to the right side of his base of
support, he will lean to the left to bring the LoG back to the middle of the base of support (most
stable place). The shift in the CoG is unavoidable. The shift of the LoG is an automatic
adaptation but under some volitional control.
Copyright © 2019 by F. A. Davis Company
, 19. Upon what variables is the magnitude of friction dependent?
ANS: The magnitude of friction is dependent upon (1) the magnitude of contact between the two
surfaces on which the friction is occurring—increased contact increases the maximum value of
static friction or the absolute value of kinetic friction; (2) the nature of the contacting surfaces—
the rougher one or both of the surfaces (increased coefficient of static or kinetic friction), the
greater is the maximum value of static friction or the absolute value of kinetic friction; and (3)
the shear force(s) on the objects—friction has magnitude only when there is attempted motion
(static friction) or actual motion (kinetic friction) between the two surfaces—the magnitude of
friction on a static object will always equal the net shear force on that object; the magnitude of
friction on a moving object is always the product of the contact force and the coefficient of
kinetic friction.
20. What kind of force system do the fibers within a pennate muscle form? Explain.
ANS: Concurrent. Each fiber represents a separate force vector with the same general point of
application but which pulls at an angle to each other.
21. How do you determine the net effect of two muscle pulls applied to the same spot? What is
this process called?
ANS: You find the resultant pull of the two forces by drawing the two forces, creating a
parallelogram by adding sides parallel to each of the forces, and drawing a diagonal within the
parallelogram. The resultant is the diagonal with its point of application at the original source
and whose arrow head (limit of magnitude) is at the opposite corner of the parallelogram. This is
called composition of forces.
22. Explain how anatomical pulleys affect the magnitude and direction of a muscle force (Fms).
ANS: Anatomical pulleys (always single pulleys) do not affect the magnitude of Fms but do
change the direction of pull. The change in action line generally brings the action line away from
the joint axis, thus increasing the moment arm or rotatory component of the applied force.
Copyright © 2019 by F. A. Davis Company
