P |a |g |e | | |
1
AVIXA CTS EXAM 2025 WITH 100%
VERIFIED SOLUTIONS
How is the volume of a space calculated - CORRECT-ANSWER-Length
| | | | | | | | |
times width times hight
| | | |
What is the most important in formation to be gathered on a site visit -
| | | | | | | | | | | | | |
CORRECT-ANSWER-room size and layout | | |
what would be the volume of a room that measures 7 meters long by 6
| | | | | | | | | | | | | |
meters wide and 3 meters high - CORRECT-ANSWER-126 meters =
| | | | | | | | | |
7*6*3
|
, P |a |g |e | | |
2
What would a mechanical drawing be used for? - CORRECT-ANSWER-
| | | | | | | | |
location of heating , plumbing and ventilation in a venue
| | | | | | | | |
When conducting a site visit if a ladder is needed what type of ladder
| | | | | | | | | | | | |
should be used and why? - CORRECT-ANSWER-fiberglass or wood in
| | | | | | | | | |
case a surface might be electrified
| | | | | |
A scale drawing unit of 1/1:20 signifies what type of scale-drawing
| | | | | | | | | |
measurement? - CORRECT-ANSWER-a common metric scale
| | | | | |
When considering customer constraints for , the signal type,
| | | | | | | | | |
distance from viewers, aspect ratio and source resolution are all
| | | | | | | | | |
limiting factors. - CORRECT-ANSWER-image display
| | | | |
When documenting requirements for network services, a formal
| | | | | | |
technical document called a(n)
| |is often utilized. - CORRECT- | | | | | | |
ANSWER-SLA( service level agreement)
| | | |
1
AVIXA CTS EXAM 2025 WITH 100%
VERIFIED SOLUTIONS
How is the volume of a space calculated - CORRECT-ANSWER-Length
| | | | | | | | |
times width times hight
| | | |
What is the most important in formation to be gathered on a site visit -
| | | | | | | | | | | | | |
CORRECT-ANSWER-room size and layout | | |
what would be the volume of a room that measures 7 meters long by 6
| | | | | | | | | | | | | |
meters wide and 3 meters high - CORRECT-ANSWER-126 meters =
| | | | | | | | | |
7*6*3
|
, P |a |g |e | | |
2
What would a mechanical drawing be used for? - CORRECT-ANSWER-
| | | | | | | | |
location of heating , plumbing and ventilation in a venue
| | | | | | | | |
When conducting a site visit if a ladder is needed what type of ladder
| | | | | | | | | | | | |
should be used and why? - CORRECT-ANSWER-fiberglass or wood in
| | | | | | | | | |
case a surface might be electrified
| | | | | |
A scale drawing unit of 1/1:20 signifies what type of scale-drawing
| | | | | | | | | |
measurement? - CORRECT-ANSWER-a common metric scale
| | | | | |
When considering customer constraints for , the signal type,
| | | | | | | | | |
distance from viewers, aspect ratio and source resolution are all
| | | | | | | | | |
limiting factors. - CORRECT-ANSWER-image display
| | | | |
When documenting requirements for network services, a formal
| | | | | | |
technical document called a(n)
| |is often utilized. - CORRECT- | | | | | | |
ANSWER-SLA( service level agreement)
| | | |
