CISCO FINAL EXAM WITH ALL CORRECT & 100%
VERIFIED ANSWERS|LATEST UPDATE|ALREADY
GRADED A+
What is the correct order for PDU encapsulation? ✔Correct answer-Frame Header-Network
Header-Transport Header-Data-Frame Trailler
A PC is configured to obtain an IP address automatically from network 192.168.1.0/24. The network
administrator issues the arp -a command and notices an entry of 192.168.1.255 ff-ff-ff-ff-ff-ff. Which
statement describes this entry? ✔Correct answer-This is a static map entry
Which two notations are useable nibble boundaries when subnetting in IPv6? ✔Correct answer-
*/64
*/68
What will a Layer 2 switch do when the destination MAC address of a received frame is not in the
MAC table? ✔Correct answer-It forwards the frame out of all ports except for the port at which the
frame was received.
Which two statements correctly describe a router memory type and its contents? ✔Correct
answer-*RAM is volatile and stores the IP routing table.
*ROM is nonvolatile and contains basic diagnostic software.
What is the auto-MDIX feature on a switch? ✔Correct answer-the automatic configuration of an
interface for a straight-through or a crossover Ethernet cable connection
What is the purpose of the routing process? ✔Correct answer-to select the paths that are used to
direct traffic to destination networks
What is the purpose of ICMP messages? ✔Correct answer-to provide feedback of IP packet
transmissions
Open the PT activity. Perform the tasks in the activity instructions and then fill in the blank.
The Server0 message is ✔Correct answer-Winner
Refer to the exhibit. Which IP addressing scheme should be changed? ✔Correct answer-Site 2
Which subnet would include the address 192.168.1.96 as a usable host address? ✔Correct answer-
192.168.1.64/26
Which subnet would include the address 192.168.1.192 as a usable host address? ✔Correct
answer-192.168.1.128/25
An administrator uses the Ctrl-Shift-6 key combination on a switch after issuing the ping command.
What is the purpose of using these keystrokes? ✔Correct answer-to interrupt the ping process
, Refer to the exhibit. A network administrator is configuring access control to switch SW1. If the
administrator uses Telnet to connect to the switch, which password is needed to access user EXEC
mode? ✔Correct answer-linevtyin
Refer to the exhibit. A network administrator is configuring access control to switch SW1. If the
administrator uses console port to connect to the switch, which password is needed to access user
EXEC mode? ✔Correct answer-linecoin
Refer to the exhibit. What is the significance of the asterisk (*) in the exhibited output? ✔Correct
answer-The asterisk designates which file system is the default file system.
When applied to a router, which command would help mitigate brute-force password attacks against
the router? ✔Correct answer-login block-for 60 attempts 5 within 60
A company has a network address of 192.168.1.64 with a subnet mask of 255.255.255.192. The
company wants to create two subnetworks that would contain 10 hosts and 18 hosts respectively.
Which two networks would achieve that? ✔Correct answer-*192.168.1.64/27
*192.168.1.96/28
Which field in an IPv4 packet header will typically stay the same during its transmission? ✔Correct
answer-Destination Address
Refer to the exhibit.
The network administrator enters these commands into the R1 router: R1# copy running-config tftp
Address or name of remote host [ ]?
When the router prompts for an address or remote host name, what IP address should the
administrator enter at the prompt? ✔Correct answer-192.168.11.252
What is the effect of configuring the ipv6 unicast-routing command on a router ✔Correct answer-
to enable the router as an IPv6 router
Refer to the exhibit. Consider the IP address configuration shown from PC1. What is a description of
the default gateway address? ✔Correct answer-It is the IP address of the Router1 interface that
connects the PC1 LAN to Router1.
Which procedure is used to reduce the effect of crosstalk in copper cables? ✔Correct answer-
twisting opposing circuit wire pairs together
What happens when part of an Internet radio transmission is not delivered to the destination?
✔Correct answer-The transmission continues without the missing portion.
Which address on a PC does not change, even if the PC is moved to a different network? ✔Correct
answer-MAC address
Three bank employees are using the corporate network. The first employee uses a web browser to
view a company web page in order to read some announcements. The second employee accesses
the corporate database to perform some financial transactions. The third employee participates in an
important live audio conference with other corporate managers in branch offices. If QoS is
implemented on this network, what will be the priorities from highest to lowest of the different data
types?. ✔Correct answer-audio conference, financial transactions, web page
VERIFIED ANSWERS|LATEST UPDATE|ALREADY
GRADED A+
What is the correct order for PDU encapsulation? ✔Correct answer-Frame Header-Network
Header-Transport Header-Data-Frame Trailler
A PC is configured to obtain an IP address automatically from network 192.168.1.0/24. The network
administrator issues the arp -a command and notices an entry of 192.168.1.255 ff-ff-ff-ff-ff-ff. Which
statement describes this entry? ✔Correct answer-This is a static map entry
Which two notations are useable nibble boundaries when subnetting in IPv6? ✔Correct answer-
*/64
*/68
What will a Layer 2 switch do when the destination MAC address of a received frame is not in the
MAC table? ✔Correct answer-It forwards the frame out of all ports except for the port at which the
frame was received.
Which two statements correctly describe a router memory type and its contents? ✔Correct
answer-*RAM is volatile and stores the IP routing table.
*ROM is nonvolatile and contains basic diagnostic software.
What is the auto-MDIX feature on a switch? ✔Correct answer-the automatic configuration of an
interface for a straight-through or a crossover Ethernet cable connection
What is the purpose of the routing process? ✔Correct answer-to select the paths that are used to
direct traffic to destination networks
What is the purpose of ICMP messages? ✔Correct answer-to provide feedback of IP packet
transmissions
Open the PT activity. Perform the tasks in the activity instructions and then fill in the blank.
The Server0 message is ✔Correct answer-Winner
Refer to the exhibit. Which IP addressing scheme should be changed? ✔Correct answer-Site 2
Which subnet would include the address 192.168.1.96 as a usable host address? ✔Correct answer-
192.168.1.64/26
Which subnet would include the address 192.168.1.192 as a usable host address? ✔Correct
answer-192.168.1.128/25
An administrator uses the Ctrl-Shift-6 key combination on a switch after issuing the ping command.
What is the purpose of using these keystrokes? ✔Correct answer-to interrupt the ping process
, Refer to the exhibit. A network administrator is configuring access control to switch SW1. If the
administrator uses Telnet to connect to the switch, which password is needed to access user EXEC
mode? ✔Correct answer-linevtyin
Refer to the exhibit. A network administrator is configuring access control to switch SW1. If the
administrator uses console port to connect to the switch, which password is needed to access user
EXEC mode? ✔Correct answer-linecoin
Refer to the exhibit. What is the significance of the asterisk (*) in the exhibited output? ✔Correct
answer-The asterisk designates which file system is the default file system.
When applied to a router, which command would help mitigate brute-force password attacks against
the router? ✔Correct answer-login block-for 60 attempts 5 within 60
A company has a network address of 192.168.1.64 with a subnet mask of 255.255.255.192. The
company wants to create two subnetworks that would contain 10 hosts and 18 hosts respectively.
Which two networks would achieve that? ✔Correct answer-*192.168.1.64/27
*192.168.1.96/28
Which field in an IPv4 packet header will typically stay the same during its transmission? ✔Correct
answer-Destination Address
Refer to the exhibit.
The network administrator enters these commands into the R1 router: R1# copy running-config tftp
Address or name of remote host [ ]?
When the router prompts for an address or remote host name, what IP address should the
administrator enter at the prompt? ✔Correct answer-192.168.11.252
What is the effect of configuring the ipv6 unicast-routing command on a router ✔Correct answer-
to enable the router as an IPv6 router
Refer to the exhibit. Consider the IP address configuration shown from PC1. What is a description of
the default gateway address? ✔Correct answer-It is the IP address of the Router1 interface that
connects the PC1 LAN to Router1.
Which procedure is used to reduce the effect of crosstalk in copper cables? ✔Correct answer-
twisting opposing circuit wire pairs together
What happens when part of an Internet radio transmission is not delivered to the destination?
✔Correct answer-The transmission continues without the missing portion.
Which address on a PC does not change, even if the PC is moved to a different network? ✔Correct
answer-MAC address
Three bank employees are using the corporate network. The first employee uses a web browser to
view a company web page in order to read some announcements. The second employee accesses
the corporate database to perform some financial transactions. The third employee participates in an
important live audio conference with other corporate managers in branch offices. If QoS is
implemented on this network, what will be the priorities from highest to lowest of the different data
types?. ✔Correct answer-audio conference, financial transactions, web page
