CSWA-Drawing Views w/pics Questions and Verified Answers

Model View Ans: A drawing view of a part or assembly. Projected View Ans: A drawing view projected orthogonally from an existing view. Auxiliary View Ans: An orthographic view of an object using a direction of sight other than one of the six basic views (front, top, right-side, rear, bottom, left-side); used to show a surface that is not parallel to any of the principal view planes. Used to show an object from an odd angle Section View Ans: Is (1) a part or assembly view cut by a plane, or (2) a drawing view created by cutting another drawing view with a section line. Aligned Section Partial Section Ans: A special type of section view that allows you to clearly show details of a section created at an angle. Commonly used on models that have rotational symmetry. Ans: A special case of the regular section view. A section line that does not cross the entire model. Broken-Out Section Ans: A drawing view that exposes inner details of a drawing view by removing material from a closed profile, usually a spline. Detail View Ans: A portion of a larger view, usually at a larger scale than the original view.Model View Ans: A drawing view of a part or assembly. Projected View Ans: A drawing view projected orthogonally from an existing view. Auxiliary View Ans: An orthographic view of an object using a direction of sight other than one of the six basic views (front, top, right-side, rear, bottom, left-side); used to show a surface that is not parallel to any of the principal view planes. Used to show an object from an odd angle Section View Ans: Is (1) a part or assembly view cut by a plane, or (2) a drawing view created by cutting another drawing view with a section line. Aligned Section Partial Section Ans: A special type of section view that allows you to clearly show details of a section created at an angle. Commonly used on models that have rotational symmetry. Ans: A special case of the regular section view. A section line that does not cross the entire model. Broken-Out Section Ans: A drawing view that exposes inner details of a drawing view by removing material from a closed profile, usually a spline. Detail View Ans: A portion of a larger view, usually at a larger scale than the original view.