TATTOO OREGON TEST | QUESTIONS AND ANSWERS
| VERIFIED AND WELL DETAILED ANSWERS | EXAM
ALREADY GRADED A+| LATEST EXAM UPDATE
a-bar - (ANSWER)abbreviation for armature bar
aligned - (ANSWER)armature bar and rear coil should be ____________
more leverage - (ANSWER)an a-bar extending past rear coil creates _________
1.5-1.625 - (ANSWER)usually a longer armature bar is a range from _.___ to
_.____
plain steel, no chrome - (ANSWER)armature bars should be _________ ________,
_____ ____________
.010-.012 - (ANSWER)when a-bar is flat on coil, rear coil has between .___-.___
dust, lint, debris, hitting at an angle - (ANSWER)what can cause a rattle or
deflection of a-bar? (4 things)
run hot - (ANSWER)coils with too much core showing tend to ____ _____
buzz or rattle - (ANSWER)do not allow the front spring to hang over the rear of
the armature bar because it can create a ______ or ___________
,contact screws - (ANSWER)there should be no sharp edges on __________
_______, should be rounded and very smooth
faster - (ANSWER)a short front spring will be _________
rockwell scale - (ANSWER)all metals are measured on the _________ _______
48-51 - (ANSWER)best on the scale for spring stock is ___-___
alcohol - (ANSWER)can be used to clean your contact area and screws and spring
rattle - (ANSWER)thin, cheap binding posts cause ________
leverage - (ANSWER)_____________ is a key factor when it comes to a-bar choice
100 - (ANSWER)copper is ___% conductive
copper and zinc - (ANSWER)brass is a mixture of
6-32, 8-32 - (ANSWER)some machines have _-__ threaded machine screws and
some have _-__
, thicker binding posts - (ANSWER)_________ __________ ______ help dampen
vibrations
shorter - (ANSWER)is a shorter or longer front spring better on a liner?
shoulder washers - (ANSWER)screw insulators commonly known as __________
__________ , most common are made of fiber and plastic
true - (ANSWER)a longer A-Bar has more leverage, true or false?
electrical contact to contact screw - (ANSWER)purpose of the binding post
rubber grommets - (ANSWER)dampener or rubber grommets better?
hot - (ANSWER)never use brass screws or any other non-ferrous screws for the
coil screws can cause the coils to get ___
soldering lugs - (ANSWER)______________ ____ are soldered at the ends of the
coil wires and capacitor wires, with a 5/16" tube vise
liners - (ANSWER)tattoo machine capacitors have 22 MFD for ________
| VERIFIED AND WELL DETAILED ANSWERS | EXAM
ALREADY GRADED A+| LATEST EXAM UPDATE
a-bar - (ANSWER)abbreviation for armature bar
aligned - (ANSWER)armature bar and rear coil should be ____________
more leverage - (ANSWER)an a-bar extending past rear coil creates _________
1.5-1.625 - (ANSWER)usually a longer armature bar is a range from _.___ to
_.____
plain steel, no chrome - (ANSWER)armature bars should be _________ ________,
_____ ____________
.010-.012 - (ANSWER)when a-bar is flat on coil, rear coil has between .___-.___
dust, lint, debris, hitting at an angle - (ANSWER)what can cause a rattle or
deflection of a-bar? (4 things)
run hot - (ANSWER)coils with too much core showing tend to ____ _____
buzz or rattle - (ANSWER)do not allow the front spring to hang over the rear of
the armature bar because it can create a ______ or ___________
,contact screws - (ANSWER)there should be no sharp edges on __________
_______, should be rounded and very smooth
faster - (ANSWER)a short front spring will be _________
rockwell scale - (ANSWER)all metals are measured on the _________ _______
48-51 - (ANSWER)best on the scale for spring stock is ___-___
alcohol - (ANSWER)can be used to clean your contact area and screws and spring
rattle - (ANSWER)thin, cheap binding posts cause ________
leverage - (ANSWER)_____________ is a key factor when it comes to a-bar choice
100 - (ANSWER)copper is ___% conductive
copper and zinc - (ANSWER)brass is a mixture of
6-32, 8-32 - (ANSWER)some machines have _-__ threaded machine screws and
some have _-__
, thicker binding posts - (ANSWER)_________ __________ ______ help dampen
vibrations
shorter - (ANSWER)is a shorter or longer front spring better on a liner?
shoulder washers - (ANSWER)screw insulators commonly known as __________
__________ , most common are made of fiber and plastic
true - (ANSWER)a longer A-Bar has more leverage, true or false?
electrical contact to contact screw - (ANSWER)purpose of the binding post
rubber grommets - (ANSWER)dampener or rubber grommets better?
hot - (ANSWER)never use brass screws or any other non-ferrous screws for the
coil screws can cause the coils to get ___
soldering lugs - (ANSWER)______________ ____ are soldered at the ends of the
coil wires and capacitor wires, with a 5/16" tube vise
liners - (ANSWER)tattoo machine capacitors have 22 MFD for ________
