MSSC - Quality Certification / Actual Exam Questions
& Correct, Certified Solutions /
Which is NOT one of the steps used in the glass box method? - (ANSWER)rotate
object in glass box
The three standard views of an object are ______. - (ANSWER)top, front, right
side
What is the order of precedence of lines in a drawing? - (ANSWER)object, hidden,
center
What type of feature is parallel to the surface being dimensioned? -
(ANSWER)dimension line
A ______ dimension is described in inches per foot. - (ANSWER)shaft taper
To establish on a drawing that 1/4 inch equals 1 inch, the designer would write
______. - (ANSWER)1/4 = 1
Section lines on a blueprint include _______. - (ANSWER)a surface that has been
cut
In a threaded fastener assembly what is designed to protect the threads? -
(ANSWER)shank
, The minor diameter of a screw thread is measured at the ______. -
(ANSWER)root of screw thread
The minor diameter of a threaded fastener is ______. - (ANSWER)the major
diameter minus the thread height
How do you determine the grade of a bolt? - (ANSWER)number of lines on the
head +2 indicates the grade
A screw with National fine thread is represented on a drawing with what
designation? - (ANSWER)NF
Metals treated by ______ processes become soft. - (ANSWER)annealing
A running fit is also called a(n) ______. - (ANSWER)sliding fit
The term ______ refers to a physical portion of a part. - (ANSWER)feature
A(n) _______ is a theoretically perfect line, point or pane that is located by a
similar feature or part. - (ANSWER)datum
GD&T _________________. - (ANSWER)allows certain tolerances on part
features to be increased
& Correct, Certified Solutions /
Which is NOT one of the steps used in the glass box method? - (ANSWER)rotate
object in glass box
The three standard views of an object are ______. - (ANSWER)top, front, right
side
What is the order of precedence of lines in a drawing? - (ANSWER)object, hidden,
center
What type of feature is parallel to the surface being dimensioned? -
(ANSWER)dimension line
A ______ dimension is described in inches per foot. - (ANSWER)shaft taper
To establish on a drawing that 1/4 inch equals 1 inch, the designer would write
______. - (ANSWER)1/4 = 1
Section lines on a blueprint include _______. - (ANSWER)a surface that has been
cut
In a threaded fastener assembly what is designed to protect the threads? -
(ANSWER)shank
, The minor diameter of a screw thread is measured at the ______. -
(ANSWER)root of screw thread
The minor diameter of a threaded fastener is ______. - (ANSWER)the major
diameter minus the thread height
How do you determine the grade of a bolt? - (ANSWER)number of lines on the
head +2 indicates the grade
A screw with National fine thread is represented on a drawing with what
designation? - (ANSWER)NF
Metals treated by ______ processes become soft. - (ANSWER)annealing
A running fit is also called a(n) ______. - (ANSWER)sliding fit
The term ______ refers to a physical portion of a part. - (ANSWER)feature
A(n) _______ is a theoretically perfect line, point or pane that is located by a
similar feature or part. - (ANSWER)datum
GD&T _________________. - (ANSWER)allows certain tolerances on part
features to be increased
