NCCER Module 4 Introduction to Power Tools Test Questions
with 100% Correct Answers
A Porta-Power® is an example of a ANSWER -saber saws
__________tool. - ANSWER -hydraulic
Keep the drill's air vent clean with a small
A power miter saw combines a miter box with a _______. - ANSWER -brush
_______saw. - ANSWER -circular
A ____________drill is used when there is no
To prevent electrical shock, power tools should source of electricity. - ANSWER -pneumatic
only be operated with the proper? -
ANSWER -GFCI
On power tools, you should never engage the
trigger __________. - ANSWER -lock
When using an air wrench, keep your body
stance _______. - ANSWER -balanced
If a pneumatic nailer is not firing properly, before
you attempt repairs you must disconnect the? -
Drill bits are held in place by? - ANSWER - ANSWER -air hose
chucks
Before you start drilling, make sure the drill bit is
The angle grinder is used to grind ________, tightened in the? - ANSWER -chuck
________ materials. - ANSWER -hard,
heavy
When using a power drill, proper ground fault
protection will prevent ________shock. -
Before you plug any saw into a power source, ANSWER -electric
make sure the power switch is in the
_______position. - ANSWER -OFF
Never use a circular saw that doesn't have an
upper blade guard because the guard protects
An example of an AC source of power is a you from touching the? - ANSWER -blade
______receptacle. - ANSWER -wall
The adjustable tool rest on a bench grinder
The first step when using a pneumatically should be positioned_______ inch from the
powered nailer for the first time is to read the wheel. - ANSWER -1/8
manufacturer's ____________. -
ANSWER -instructions
Some manufacturers suggest that each time you
use a pneumatic nailer, the air inlet needs a few
Saws with fine blades that are excellent for drops of? - ANSWER -oil
delicate and intricate cutting are called? -
1/2
with 100% Correct Answers
A Porta-Power® is an example of a ANSWER -saber saws
__________tool. - ANSWER -hydraulic
Keep the drill's air vent clean with a small
A power miter saw combines a miter box with a _______. - ANSWER -brush
_______saw. - ANSWER -circular
A ____________drill is used when there is no
To prevent electrical shock, power tools should source of electricity. - ANSWER -pneumatic
only be operated with the proper? -
ANSWER -GFCI
On power tools, you should never engage the
trigger __________. - ANSWER -lock
When using an air wrench, keep your body
stance _______. - ANSWER -balanced
If a pneumatic nailer is not firing properly, before
you attempt repairs you must disconnect the? -
Drill bits are held in place by? - ANSWER - ANSWER -air hose
chucks
Before you start drilling, make sure the drill bit is
The angle grinder is used to grind ________, tightened in the? - ANSWER -chuck
________ materials. - ANSWER -hard,
heavy
When using a power drill, proper ground fault
protection will prevent ________shock. -
Before you plug any saw into a power source, ANSWER -electric
make sure the power switch is in the
_______position. - ANSWER -OFF
Never use a circular saw that doesn't have an
upper blade guard because the guard protects
An example of an AC source of power is a you from touching the? - ANSWER -blade
______receptacle. - ANSWER -wall
The adjustable tool rest on a bench grinder
The first step when using a pneumatically should be positioned_______ inch from the
powered nailer for the first time is to read the wheel. - ANSWER -1/8
manufacturer's ____________. -
ANSWER -instructions
Some manufacturers suggest that each time you
use a pneumatic nailer, the air inlet needs a few
Saws with fine blades that are excellent for drops of? - ANSWER -oil
delicate and intricate cutting are called? -
1/2
