AMMO 45 EXAM, AMMO 45 Combined 2 Test Questions With
Answers Graded A Already
1. Which term describes using ammo to light up an area?: Illuminate
2. What purpose does an outer pack seal perform?: Identifies if a container has
been compromised.
3. How are outer packs stacked?: To fit the pallet.
4. Select the correct statement about inner packs.: There is only one inner pack
within an outer pack.
5. Why is color coding on ammunition and packaging so important?: To identify
the hazard type and the use of an ammunition item.
6. Which item shows a fiber container?: the one wrapped in the silver packaging.
7. What do markings identify on ammunition?: Ammunition type.
8. Select the ammunition used only for training.: All with blue on it.
9. Just looking from this angle, what is wrong with this image? Select all that
apply.: There are no markings.
Items are not packed correctly.
Items are not secured correctly.
10. What is the significance of the Nose End marking on a rocket or missile?-
: Notes where the cone of the ammo is located.
11. Based on the color coding, is this a service or training bomb?: Service
(Olive drab with yellow stripe indicates the ammo contains explosives.
Blue indicates the ammo is use for training or practice)
12. Is this a service mine or a training mine?: Service
(It's Olive drab)
13. Drag your responses about working with ammo packaging to the proper
boxes.: Do:
-Handle ammo boxes with care
-Turn in empty outer boxes after use
Don't:
-Unpack more than what you will use.
14. The purpose of operational safety is to create and maintain the safest work
environment possible by , , and .: Reducing
injuries, preventing damage, saving lives.
15. The Cardinal Rule states that all operations must expose the minimum
number of for the minimum amount of to the minimum
1/9
, AMMO 45 EXAM, AMMO 45 Combined 2 Test Questions With
Answers Graded A Already
amount of to be consistent with safe operations.: people, time, ex-
plosives.
16. What is the primary purpose of an SOP?: To protect lives and prevent injuries
17. Thinking of general safety, select the items and activities NOT allowed in
areas where ammunition is inspected, stored, prepared for transportation, or
in-transit.: -Horseplay
-Loose clothing and jewelry
-Smoking, matches, lighters, vapes
-Cell phones
18. You are delivering a load of ammunition to the demolition grounds today
but the gate is locked and a red flag is flying. What do you do?: Not enter, turn
around, and wait until it is clear.
19. Drag the name of a facility type to the box below the image it best repre-
sents.: AGM-House looking building
Demolition Grounds-Fenced area
ECM-Cut out of hill
20. Do all areas and facilities storing or handling ammo require a lightning
protection system (LPS)?: Yes.
21. Which set of symbols represents chemical agents?: Set of circle/blue signs.
22. Which rules do NOT apply to on-post movement of ammo?: Maintain com-
patibility
23. You are loading a truck transporting ammunition with a hazard classifica-
tion of 1.4. Which placards should be on the vehicle?: The one that says 1.4 or
the fire symbol that says a 4 and its on a tilted square.
24. What are placards?: Hazardous signs and symbols.
25. Drag each placard to the box next to its matching fire symbol.: 1>1.1*1
2>1.2*1
3>1.3*1
4>1.4*1
26. POP markings shown on the ammo can are required on all
even when its not ammo.: Hazardous Materials
27. What purpose does banding serve?: Holds the contents of the pallets in place
so they do not fall or become looser
28. Which item shows a fiber container?: its the 3rd one or the one that's like
white wrapping and looks like bricks of yayo barrier bags look like space MREs and
the Hermetically Sealed Cans are cans
29. In the image below the FSC is "1370" and the DODIC is "L477". when
combined what do they represent?: Lot Number
2/9
Answers Graded A Already
1. Which term describes using ammo to light up an area?: Illuminate
2. What purpose does an outer pack seal perform?: Identifies if a container has
been compromised.
3. How are outer packs stacked?: To fit the pallet.
4. Select the correct statement about inner packs.: There is only one inner pack
within an outer pack.
5. Why is color coding on ammunition and packaging so important?: To identify
the hazard type and the use of an ammunition item.
6. Which item shows a fiber container?: the one wrapped in the silver packaging.
7. What do markings identify on ammunition?: Ammunition type.
8. Select the ammunition used only for training.: All with blue on it.
9. Just looking from this angle, what is wrong with this image? Select all that
apply.: There are no markings.
Items are not packed correctly.
Items are not secured correctly.
10. What is the significance of the Nose End marking on a rocket or missile?-
: Notes where the cone of the ammo is located.
11. Based on the color coding, is this a service or training bomb?: Service
(Olive drab with yellow stripe indicates the ammo contains explosives.
Blue indicates the ammo is use for training or practice)
12. Is this a service mine or a training mine?: Service
(It's Olive drab)
13. Drag your responses about working with ammo packaging to the proper
boxes.: Do:
-Handle ammo boxes with care
-Turn in empty outer boxes after use
Don't:
-Unpack more than what you will use.
14. The purpose of operational safety is to create and maintain the safest work
environment possible by , , and .: Reducing
injuries, preventing damage, saving lives.
15. The Cardinal Rule states that all operations must expose the minimum
number of for the minimum amount of to the minimum
1/9
, AMMO 45 EXAM, AMMO 45 Combined 2 Test Questions With
Answers Graded A Already
amount of to be consistent with safe operations.: people, time, ex-
plosives.
16. What is the primary purpose of an SOP?: To protect lives and prevent injuries
17. Thinking of general safety, select the items and activities NOT allowed in
areas where ammunition is inspected, stored, prepared for transportation, or
in-transit.: -Horseplay
-Loose clothing and jewelry
-Smoking, matches, lighters, vapes
-Cell phones
18. You are delivering a load of ammunition to the demolition grounds today
but the gate is locked and a red flag is flying. What do you do?: Not enter, turn
around, and wait until it is clear.
19. Drag the name of a facility type to the box below the image it best repre-
sents.: AGM-House looking building
Demolition Grounds-Fenced area
ECM-Cut out of hill
20. Do all areas and facilities storing or handling ammo require a lightning
protection system (LPS)?: Yes.
21. Which set of symbols represents chemical agents?: Set of circle/blue signs.
22. Which rules do NOT apply to on-post movement of ammo?: Maintain com-
patibility
23. You are loading a truck transporting ammunition with a hazard classifica-
tion of 1.4. Which placards should be on the vehicle?: The one that says 1.4 or
the fire symbol that says a 4 and its on a tilted square.
24. What are placards?: Hazardous signs and symbols.
25. Drag each placard to the box next to its matching fire symbol.: 1>1.1*1
2>1.2*1
3>1.3*1
4>1.4*1
26. POP markings shown on the ammo can are required on all
even when its not ammo.: Hazardous Materials
27. What purpose does banding serve?: Holds the contents of the pallets in place
so they do not fall or become looser
28. Which item shows a fiber container?: its the 3rd one or the one that's like
white wrapping and looks like bricks of yayo barrier bags look like space MREs and
the Hermetically Sealed Cans are cans
29. In the image below the FSC is "1370" and the DODIC is "L477". when
combined what do they represent?: Lot Number
2/9
