VIVINT SHP PRACTICE EXAM
When installing a DW 21 into a metal door frame with a wooden door
which should you be sure to use? - ANSWERS-A DW 11 should be
used on all metal door frames
Which of the following zone/sensor types are correct when
programming a SMKT3 - ANSWERS-Type 09 For smoke detection,
type 09 for heat detection, type 08 for freeze detection
What is the correct height at which to install the PIR2 - ANSWERS-
At 7.5 feet, 2.1 m
When programming a DW 21, which loop number is used -
ANSWERS-1
True or false win programming a sensor into the panel you can type in
the serial number or learn it in by triggering the device - ANSWERS-
True
How would you program a GB to when it is mounted on a master
bedroom ceiling - ANSWERS-Loop 1 zone type 3
True or false panic pendants are programmed as an audible alarm type
07 - ANSWERS-False
, True or false when installing the take 345 you must ensure that the
transformer is supplying power to the power supply before connecting
the battery - ANSWERS-False
True or false you are required to test signals from all secondary
keypad and key fobs even though they are not detection devices -
ANSWERS-True
When installing TDW 21 what size b***h did you use to drill the hole
for the sensor - ANSWERS-3/4"
When programming a PIR to which Loop number Must you use -
ANSWERS-1
Which step should you always take to ensure that the Z wave network
is aligned in the strongest manner - ANSWERS-Select rediscover
network from the Z wave toolbox
When powering up a deadbolt smart lock for the first time which of
the following things must you always do - ANSWERS-Initiates the
lock handing procedure
What is the input voltage range of the doorbell camera - ANSWERS-
12-24 V
When installing a DW 21 into a metal door frame with a wooden door
which should you be sure to use? - ANSWERS-A DW 11 should be
used on all metal door frames
Which of the following zone/sensor types are correct when
programming a SMKT3 - ANSWERS-Type 09 For smoke detection,
type 09 for heat detection, type 08 for freeze detection
What is the correct height at which to install the PIR2 - ANSWERS-
At 7.5 feet, 2.1 m
When programming a DW 21, which loop number is used -
ANSWERS-1
True or false win programming a sensor into the panel you can type in
the serial number or learn it in by triggering the device - ANSWERS-
True
How would you program a GB to when it is mounted on a master
bedroom ceiling - ANSWERS-Loop 1 zone type 3
True or false panic pendants are programmed as an audible alarm type
07 - ANSWERS-False
, True or false when installing the take 345 you must ensure that the
transformer is supplying power to the power supply before connecting
the battery - ANSWERS-False
True or false you are required to test signals from all secondary
keypad and key fobs even though they are not detection devices -
ANSWERS-True
When installing TDW 21 what size b***h did you use to drill the hole
for the sensor - ANSWERS-3/4"
When programming a PIR to which Loop number Must you use -
ANSWERS-1
Which step should you always take to ensure that the Z wave network
is aligned in the strongest manner - ANSWERS-Select rediscover
network from the Z wave toolbox
When powering up a deadbolt smart lock for the first time which of
the following things must you always do - ANSWERS-Initiates the
lock handing procedure
What is the input voltage range of the doorbell camera - ANSWERS-
12-24 V
