NCIDQ Baseline Practice Test – IDPX
Questions And Answers
When the interior designer does not want furniture to be delivered
to the designer's office, the designer should complete a -
correct answer drop ship order
An interior designer could determine what products an
independent representative handled by consulting -
correct answer a line chart
Of the options listed below, what tool is the most commonly used
in cost estimating for FF&E? -
correct answer Furniture schedule
When specifying a specialty flooring material, the interior designer
can obtain unbiased information on the hazards of a cleaning agent,
required for maintenance, from the -
correct answer material safety data sheet
After defining the exact scope of work and selecting individual floor
finish types for each area of your project, you must provide your
client with an updated working budget number.
Which method of estimating would be used at this time? -
correct answer Parameter Method
,NCIDQ Baseline Practice Test – IDPX
Questions And Answers
The commercial design firm is acting as purchasing agent for a
major renovation project, which paperwork is prepared first in the
procurement process? -
correct answer proposal
Typically what are the first items of FF&E that an interior designer
should research? -
correct answer furniture or accessory items
During the programming phase of your large, international
consulting firms new office space, the client has identified that they
have both a "bring your own device to work" policy as well as a
number of "non-assigned" workers who tend to congregate in their
combination lounge/lunchroom to work.
They would like to have ample power and data connections above
the tables and counters throughout the space that will address the
maximum number of device type connections, including standard
power, standard USB, and more universally accepted USB-C wall
outlets.
, NCIDQ Baseline Practice Test – IDPX
Questions And Answers
Which of the following outlet combinations would you suggest the
electrical engineer specify in these areas? -
correct answer (2) grounded outlets and (1) USB-C mini-port
and (1) standard USB port
Which complete lock assembly is installed in a cut-out door recess,
making it one of the most secure locking units? -
correct answer mortise
In a fully sprinklered building, how many sprinklers are required in a
room that measures 35 ft x 45 ft (1067 cm x 1372 cm)? -
correct answer 9
In a high rise building, a designer often has to work around fixed
pipes and pipe chases that cannot be moved. One of those pipe
systems is often a standpipe.
Which of the following is the best description of a standpipe
system? -
correct answer Piping and valves for use as a fire protection
system
Questions And Answers
When the interior designer does not want furniture to be delivered
to the designer's office, the designer should complete a -
correct answer drop ship order
An interior designer could determine what products an
independent representative handled by consulting -
correct answer a line chart
Of the options listed below, what tool is the most commonly used
in cost estimating for FF&E? -
correct answer Furniture schedule
When specifying a specialty flooring material, the interior designer
can obtain unbiased information on the hazards of a cleaning agent,
required for maintenance, from the -
correct answer material safety data sheet
After defining the exact scope of work and selecting individual floor
finish types for each area of your project, you must provide your
client with an updated working budget number.
Which method of estimating would be used at this time? -
correct answer Parameter Method
,NCIDQ Baseline Practice Test – IDPX
Questions And Answers
The commercial design firm is acting as purchasing agent for a
major renovation project, which paperwork is prepared first in the
procurement process? -
correct answer proposal
Typically what are the first items of FF&E that an interior designer
should research? -
correct answer furniture or accessory items
During the programming phase of your large, international
consulting firms new office space, the client has identified that they
have both a "bring your own device to work" policy as well as a
number of "non-assigned" workers who tend to congregate in their
combination lounge/lunchroom to work.
They would like to have ample power and data connections above
the tables and counters throughout the space that will address the
maximum number of device type connections, including standard
power, standard USB, and more universally accepted USB-C wall
outlets.
, NCIDQ Baseline Practice Test – IDPX
Questions And Answers
Which of the following outlet combinations would you suggest the
electrical engineer specify in these areas? -
correct answer (2) grounded outlets and (1) USB-C mini-port
and (1) standard USB port
Which complete lock assembly is installed in a cut-out door recess,
making it one of the most secure locking units? -
correct answer mortise
In a fully sprinklered building, how many sprinklers are required in a
room that measures 35 ft x 45 ft (1067 cm x 1372 cm)? -
correct answer 9
In a high rise building, a designer often has to work around fixed
pipes and pipe chases that cannot be moved. One of those pipe
systems is often a standpipe.
Which of the following is the best description of a standpipe
system? -
correct answer Piping and valves for use as a fire protection
system
