Testout Network Pro Exam Questions With Complete
Solutions
100 meters Correct Answers With an Ethernet 10BaseT
network, the maximum cable length between a computer and the
hub is __________.
100 meters Correct Answers Your network follows the
100BaseTx specifications for Fast Ethernet. What is the
maximum cable segment length allowed?
1000BaseCX Correct Answers You have been tasked with
designing a high-speed Ethernet network. Your client's building
already has 150-ohm shielded twisted pair (STP) wiring
installed. Due to budget constraints, they have asked you to
reuse the existing wiring instead of installing new fiber-optic
cabling.
Which Ethernet standard could you implement in this situation?
1000BaseLX & Single mode fiber Correct Answers You want
to implement an Ethernet network at very long distances using
fiber optic cables. Which standard and cable type would you
choose? (Select two.)
1000BaseSX Correct Answers What Gigabit Ethernet standard
uses multimode fiber-optic cabling and supports network
segments up to a maximum of 550 meters long?
100BaseFX & 1000BaseLX Correct Answers Which of the
following Ethernet standards uses fiber optic cabling? (Select
two.)
,10BaseSR &1000BaseSX Correct Answers You have been
tasked with designing an Ethernet network. Your client needs to
implement a very high-speed network backbone between
campus buildings; some of which are around 300 meters apart.
Multimode fiber-optic cabling has already been installed
between buildings. Your client has asked that you use the
existing cabling.
Which Ethernet standard meets these guidelines? (Choose two.)
10BaseT & 1000BaseT Correct Answers Which of the
following use the CSMA/CD access method? Select all that
apply.
10GBaseLW Correct Answers Which of the following
standards is used by SONET?
169.254.0.1-169.254.255.254 Correct Answers Which of the
following IP address ranges is reserved for Automatic Private IP
Addressing?
2000 meters Correct Answers You are planning a network for
an educational campus. Due to the size of the buildings and the
distance between them, you have elected to use 10BaseFL hubs,
cabling, and network interface cards.
What is the maximum length for the network cable between a
workstation and a hub?
255.255.0.0 & 169.254.0.0 Correct Answers What is the
network address and subnet mask used by APIPA? (Select two.)
,A router is connected to a network 192.168.1.0/24 and network
192.168.2.0/24. The router is configured to use RIP and has
learned of networks 192.168.3.0/24 and 192.168.4.0/24. There is
no default route on router. The router receives a packet
addressed to network 10.1.0.0/16. What will the router do with
the packet? Correct Answers Drop the packet.
A router is connected to a network 192.169.1.0/24 and network
192.168.2.0/24. The router is configured to use RIP and has
learned of networks 192.168.3.0/24 and 192.168.4.0/24. The
router is also configured with a static route of 0.0.0.0 with a
mask of 0.0.0.0. The router receives a packet addressed to the
network 10.1.0.0/16. What will the router do with the packet.
Correct Answers Forward the packet to the next hop router
specified by the route network 0.0.0.0
A router is connected to network 192.168.1.0/24 and network
192.168.2.0/24. the router is configured to use RIP and has
learned of networks 192.168.3.0/24 and 192.168.4.0/24.
The next hop router for network 192.168.3.0 has changed. You
need to make the change with the least amount of effort
possible. what should you do. Correct Answers wait for
convergence to take place.
A user reports that network access from her workstation is very
slow. The problem does not seem to be affecting any other
users.
Which of the following conditions is the most likely cause?
Correct Answers Duplex mismatch
, A user reports that network access from her workstation is very
slow. The problem does not seem to be affecting any other
users.
Which of the following conditions is the most likely cause?
Correct Answers Duplex mismatch
An unmanaged switch and CAT5e cabling Correct Answers
You are implementing a SOHO network for a local business.
The ISP has already installed and connected a cable modem in
the business.
The business has four computers that need to communicate with
each other and the Internet. The ISP's cable modem has only one
RJ-45 port. You need to set up the network with the following in
mind: Spend as little money as possible. Do not purchase
unnecessary equipment. Computers need to have a gigabit
connection to the network. New devices should not require
management or configuration
Attenuation Correct Answers You are creating an Ethernet
network for your company. The shipping department is located
in a different building that is located 150 meters from the main
wiring closet. You connect a single Cat6e cable to connect the
wiring closet to the shipping building.
Which of the following conditions are you most likely to
experience?
Bus and Star Correct Answers Which of the following physical
topologies are used with Ethernet networks? (Select two.)
CAT 5 cabling & RJ-45 connectors & The cable length must be
less than or equal to 100m Correct Answers Which of the
Solutions
100 meters Correct Answers With an Ethernet 10BaseT
network, the maximum cable length between a computer and the
hub is __________.
100 meters Correct Answers Your network follows the
100BaseTx specifications for Fast Ethernet. What is the
maximum cable segment length allowed?
1000BaseCX Correct Answers You have been tasked with
designing a high-speed Ethernet network. Your client's building
already has 150-ohm shielded twisted pair (STP) wiring
installed. Due to budget constraints, they have asked you to
reuse the existing wiring instead of installing new fiber-optic
cabling.
Which Ethernet standard could you implement in this situation?
1000BaseLX & Single mode fiber Correct Answers You want
to implement an Ethernet network at very long distances using
fiber optic cables. Which standard and cable type would you
choose? (Select two.)
1000BaseSX Correct Answers What Gigabit Ethernet standard
uses multimode fiber-optic cabling and supports network
segments up to a maximum of 550 meters long?
100BaseFX & 1000BaseLX Correct Answers Which of the
following Ethernet standards uses fiber optic cabling? (Select
two.)
,10BaseSR &1000BaseSX Correct Answers You have been
tasked with designing an Ethernet network. Your client needs to
implement a very high-speed network backbone between
campus buildings; some of which are around 300 meters apart.
Multimode fiber-optic cabling has already been installed
between buildings. Your client has asked that you use the
existing cabling.
Which Ethernet standard meets these guidelines? (Choose two.)
10BaseT & 1000BaseT Correct Answers Which of the
following use the CSMA/CD access method? Select all that
apply.
10GBaseLW Correct Answers Which of the following
standards is used by SONET?
169.254.0.1-169.254.255.254 Correct Answers Which of the
following IP address ranges is reserved for Automatic Private IP
Addressing?
2000 meters Correct Answers You are planning a network for
an educational campus. Due to the size of the buildings and the
distance between them, you have elected to use 10BaseFL hubs,
cabling, and network interface cards.
What is the maximum length for the network cable between a
workstation and a hub?
255.255.0.0 & 169.254.0.0 Correct Answers What is the
network address and subnet mask used by APIPA? (Select two.)
,A router is connected to a network 192.168.1.0/24 and network
192.168.2.0/24. The router is configured to use RIP and has
learned of networks 192.168.3.0/24 and 192.168.4.0/24. There is
no default route on router. The router receives a packet
addressed to network 10.1.0.0/16. What will the router do with
the packet? Correct Answers Drop the packet.
A router is connected to a network 192.169.1.0/24 and network
192.168.2.0/24. The router is configured to use RIP and has
learned of networks 192.168.3.0/24 and 192.168.4.0/24. The
router is also configured with a static route of 0.0.0.0 with a
mask of 0.0.0.0. The router receives a packet addressed to the
network 10.1.0.0/16. What will the router do with the packet.
Correct Answers Forward the packet to the next hop router
specified by the route network 0.0.0.0
A router is connected to network 192.168.1.0/24 and network
192.168.2.0/24. the router is configured to use RIP and has
learned of networks 192.168.3.0/24 and 192.168.4.0/24.
The next hop router for network 192.168.3.0 has changed. You
need to make the change with the least amount of effort
possible. what should you do. Correct Answers wait for
convergence to take place.
A user reports that network access from her workstation is very
slow. The problem does not seem to be affecting any other
users.
Which of the following conditions is the most likely cause?
Correct Answers Duplex mismatch
, A user reports that network access from her workstation is very
slow. The problem does not seem to be affecting any other
users.
Which of the following conditions is the most likely cause?
Correct Answers Duplex mismatch
An unmanaged switch and CAT5e cabling Correct Answers
You are implementing a SOHO network for a local business.
The ISP has already installed and connected a cable modem in
the business.
The business has four computers that need to communicate with
each other and the Internet. The ISP's cable modem has only one
RJ-45 port. You need to set up the network with the following in
mind: Spend as little money as possible. Do not purchase
unnecessary equipment. Computers need to have a gigabit
connection to the network. New devices should not require
management or configuration
Attenuation Correct Answers You are creating an Ethernet
network for your company. The shipping department is located
in a different building that is located 150 meters from the main
wiring closet. You connect a single Cat6e cable to connect the
wiring closet to the shipping building.
Which of the following conditions are you most likely to
experience?
Bus and Star Correct Answers Which of the following physical
topologies are used with Ethernet networks? (Select two.)
CAT 5 cabling & RJ-45 connectors & The cable length must be
less than or equal to 100m Correct Answers Which of the
