NWSA TTT-1 EXAM LATEST WITH 270
ACTUAL QUESTIONS AND CORRECT
VERIFIED ANSWERS ALREADY
GRADED A+ -- JUST RELEASED
100%GUARANTEED PASS!
1. Who is responsible for providing PPE? - ANSWER ✓
The employer
2. What is the correct procedure for installing bolts in
members and leg splices? - ANSWER ✓ Up and out (if
a nut comes loose the bolt will fall out and a hole can
be seen from the ground)
3. The Cantilever, by definition, is the distance between
the bridle swings and the rooster head sheave. T or F -
ANSWER ✓ True
4. What does FS stand for in rigging applications? -
ANSWER ✓ Factor of safety
,5. What term is used to describe the rules written by the
Department of Labor? - ANSWER ✓ Regulations
(Regulations are enforceable by OSHA)
6. What does OSHA stand for? - ANSWER ✓
Occupational Safety and Health Administration
7. What does ANSI stand for? - ANSWER ✓ American
National Standards Institute
8. A vertical life line shall have a minimum breaking
strength of _______ lbs. - ANSWER ✓ 5,000 lbs. (this
is 5,000 lbs. per person attached to the line)
9. An RF monitor should be worn in areas of unknown RF
exposure. T or F - ANSWER ✓ True
10. In the fall protection hierarchy system, what is the
term used for stopping a free fall? - ANSWER ✓ Fall
arrest
,11. What do the letters LOTO stand for? - ANSWER ✓
Lock Out Tag Out
12. The letters JHA stand for what? - ANSWER ✓ Job
Hazard Assessment
13. All cranes must have a posted load chart visible from
the Operator's station. - ANSWER ✓ True (per OSHA
standards)
14. How often shall all gin poles have a documented job
inspection? - ANSWER ✓ Before each job
15. What is the best synthetic rope material to use for
overhead lifting? - ANSWER ✓ Polyester
16. If you have a 16ft ladder against a wall, how any ft.
does the ladder base need to be from the wall? -
ANSWER ✓ 4 ft. (every 4 ft. up needs the ladder base
to be 1 ft. away)
, 17. When doing rope work it is optional to wear gloves.
T or F - ANSWER ✓ F
18. When regarding RF energies, LOTO stands for? -
ANSWER ✓ Lock Out Tag Out
19. What does a ground fault interrupter (GCFI) do? -
ANSWER ✓ Shuts off the flow of electricity, senses a
short circuit, helps prevent electrocution
20. What is an example of a job task that requires
LOTO? - ANSWER ✓ Climbing an AM tower
21. What should you do if a drill plug is missing its
ground prong? - ANSWER ✓ Tag it out and remove it
from service
22. Applying a lubricant such as WD-40 to stubborn
structural bolts will...? - ANSWER ✓ It can result in
over-torquing and should never be done
ACTUAL QUESTIONS AND CORRECT
VERIFIED ANSWERS ALREADY
GRADED A+ -- JUST RELEASED
100%GUARANTEED PASS!
1. Who is responsible for providing PPE? - ANSWER ✓
The employer
2. What is the correct procedure for installing bolts in
members and leg splices? - ANSWER ✓ Up and out (if
a nut comes loose the bolt will fall out and a hole can
be seen from the ground)
3. The Cantilever, by definition, is the distance between
the bridle swings and the rooster head sheave. T or F -
ANSWER ✓ True
4. What does FS stand for in rigging applications? -
ANSWER ✓ Factor of safety
,5. What term is used to describe the rules written by the
Department of Labor? - ANSWER ✓ Regulations
(Regulations are enforceable by OSHA)
6. What does OSHA stand for? - ANSWER ✓
Occupational Safety and Health Administration
7. What does ANSI stand for? - ANSWER ✓ American
National Standards Institute
8. A vertical life line shall have a minimum breaking
strength of _______ lbs. - ANSWER ✓ 5,000 lbs. (this
is 5,000 lbs. per person attached to the line)
9. An RF monitor should be worn in areas of unknown RF
exposure. T or F - ANSWER ✓ True
10. In the fall protection hierarchy system, what is the
term used for stopping a free fall? - ANSWER ✓ Fall
arrest
,11. What do the letters LOTO stand for? - ANSWER ✓
Lock Out Tag Out
12. The letters JHA stand for what? - ANSWER ✓ Job
Hazard Assessment
13. All cranes must have a posted load chart visible from
the Operator's station. - ANSWER ✓ True (per OSHA
standards)
14. How often shall all gin poles have a documented job
inspection? - ANSWER ✓ Before each job
15. What is the best synthetic rope material to use for
overhead lifting? - ANSWER ✓ Polyester
16. If you have a 16ft ladder against a wall, how any ft.
does the ladder base need to be from the wall? -
ANSWER ✓ 4 ft. (every 4 ft. up needs the ladder base
to be 1 ft. away)
, 17. When doing rope work it is optional to wear gloves.
T or F - ANSWER ✓ F
18. When regarding RF energies, LOTO stands for? -
ANSWER ✓ Lock Out Tag Out
19. What does a ground fault interrupter (GCFI) do? -
ANSWER ✓ Shuts off the flow of electricity, senses a
short circuit, helps prevent electrocution
20. What is an example of a job task that requires
LOTO? - ANSWER ✓ Climbing an AM tower
21. What should you do if a drill plug is missing its
ground prong? - ANSWER ✓ Tag it out and remove it
from service
22. Applying a lubricant such as WD-40 to stubborn
structural bolts will...? - ANSWER ✓ It can result in
over-torquing and should never be done
