Power Tools Study Guide Exam 2025
Questions and Answers
Pneumatic tools get their power from: - --Answer --Air pressure.
The most common use of the power drill is to: - --Answer --Make holes in
wood, metal, and plastic.
A masonry bit is able to drill into concrete and similar material because it has a: - --
Answer --Carbide tip.
An example of an electric power drill that is designed to be used in tight spaces is
a(n): - --Answer --Right-angle drill.
The electromagnetic drill is a: - --Answer --Portable drill used on thick metal.
Hammer drills are designed to drill into: - --Answer --Concrete, brick, and
tile.
A pneumatic impact wrench requires the use of: - --Answer --Impact sockets
that are designed for the applicable tool.
....COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED...TRUSTED & VERIFIED 1
, When cutting with a circular saw, grip the saw handles: - --Answer --Firmly
with two hands.
The high speed setting on a reciprocating saw is used for: - --Answer --
Sawing wood and other soft materials.
When using a saber saw, avoid vibration by: - --Answer --Using a clamp or
vise to hold the work.
Before using a reciprocating saw to cut through a wall or partition, always: - --
Answer --Find out what is on the other side.
Use only a band saw that has a: - --Answer --Stop.
A sliding compound miter saw has a rail that allows the blade to slide forward and
backward, which enables the saw to: - --Answer --Cut wider material than a
standard miter saw.
The blade of an abrasive cutoff saw spins at such a high speed that: - --
Answer --The resulting friction is hot enough to burn through the materials.
The end grinder is used to: - --Answer --Smooth the inside of materials, such
as pipe.
A detail grinder smoothes and polishes intricate metallic work by using
attachments called: - --Answer --Points.
....COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED...TRUSTED & VERIFIED 2
Questions and Answers
Pneumatic tools get their power from: - --Answer --Air pressure.
The most common use of the power drill is to: - --Answer --Make holes in
wood, metal, and plastic.
A masonry bit is able to drill into concrete and similar material because it has a: - --
Answer --Carbide tip.
An example of an electric power drill that is designed to be used in tight spaces is
a(n): - --Answer --Right-angle drill.
The electromagnetic drill is a: - --Answer --Portable drill used on thick metal.
Hammer drills are designed to drill into: - --Answer --Concrete, brick, and
tile.
A pneumatic impact wrench requires the use of: - --Answer --Impact sockets
that are designed for the applicable tool.
....COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED...TRUSTED & VERIFIED 1
, When cutting with a circular saw, grip the saw handles: - --Answer --Firmly
with two hands.
The high speed setting on a reciprocating saw is used for: - --Answer --
Sawing wood and other soft materials.
When using a saber saw, avoid vibration by: - --Answer --Using a clamp or
vise to hold the work.
Before using a reciprocating saw to cut through a wall or partition, always: - --
Answer --Find out what is on the other side.
Use only a band saw that has a: - --Answer --Stop.
A sliding compound miter saw has a rail that allows the blade to slide forward and
backward, which enables the saw to: - --Answer --Cut wider material than a
standard miter saw.
The blade of an abrasive cutoff saw spins at such a high speed that: - --
Answer --The resulting friction is hot enough to burn through the materials.
The end grinder is used to: - --Answer --Smooth the inside of materials, such
as pipe.
A detail grinder smoothes and polishes intricate metallic work by using
attachments called: - --Answer --Points.
....COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED...TRUSTED & VERIFIED 2
