Power Tools Exam 2025 Questions and
Answers
Corded Drill/Electric Drill - --Answer --This is a power drill that get their
power from AC wall plug source. The drill is most commonly used to make holes
by spinning drill bits into wood, metal, plastic and other materials it also used to
drive screws or to cut small holes in lumber, or to prepare a site for a nail or screw.
Cordless Drill - --Answer --This is a power drill that get their power from
DC battery source and usually contain a rechargeable battery pack that runs the
motor. This drill is useful for working in awkward areas or in areas where a power
source is hard to find.
Hammer Drill - --Answer --This drill has a pounding action that lets you
drill into concrete, brick, or tile. The bit rotates and hammers at the same time,
allowing you to drill much faster than you could with a regular drill.
Electromagnetic drill - --Answer --This drill is a portable drill mounted that
is used for drilling thick metal. When the drill is placed on metal and is turned on,
....COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED...TRUSTED & VERIFIED 1
, the magnetic base will hold the drill in place for drilling.The drill can also be
rotated on the base.
Pneumatic Drill - --Answer --This drill is powered by compressed air from
an air hose. They have many of the same parts, controls, and uses as electric drills.
Twist Drill Bit - --Answer --This is a bit used to drill wood and plastics at
high speeds or to drill metal at lower speed.
Forstner Drill Bit - --Answer --This bit is used on wood and is particularly
good for boring any part of a circle.
Flat-bladed Spade Drill Bit - --Answer --This bit is also used in wood. The
bit size is measured by the spade's diameter, which ranges from 1/2 to 1 1/2
inches.
Masonry Drill Bit - --Answer --This bit which has a carbide tip, is used in
concrete, stone, slate, and ceramic.
Hammer Drill Bits - --Answer --These drill bits can take more of a
pounding.
Auger Drill Bit - --Answer --This bit is used for drilling wood and other soft
materials, but not for drilling metal. As a rule, the point of a bit should be sharper
for softer materials than for harder ones.
....COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED...TRUSTED & VERIFIED 2
Answers
Corded Drill/Electric Drill - --Answer --This is a power drill that get their
power from AC wall plug source. The drill is most commonly used to make holes
by spinning drill bits into wood, metal, plastic and other materials it also used to
drive screws or to cut small holes in lumber, or to prepare a site for a nail or screw.
Cordless Drill - --Answer --This is a power drill that get their power from
DC battery source and usually contain a rechargeable battery pack that runs the
motor. This drill is useful for working in awkward areas or in areas where a power
source is hard to find.
Hammer Drill - --Answer --This drill has a pounding action that lets you
drill into concrete, brick, or tile. The bit rotates and hammers at the same time,
allowing you to drill much faster than you could with a regular drill.
Electromagnetic drill - --Answer --This drill is a portable drill mounted that
is used for drilling thick metal. When the drill is placed on metal and is turned on,
....COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED...TRUSTED & VERIFIED 1
, the magnetic base will hold the drill in place for drilling.The drill can also be
rotated on the base.
Pneumatic Drill - --Answer --This drill is powered by compressed air from
an air hose. They have many of the same parts, controls, and uses as electric drills.
Twist Drill Bit - --Answer --This is a bit used to drill wood and plastics at
high speeds or to drill metal at lower speed.
Forstner Drill Bit - --Answer --This bit is used on wood and is particularly
good for boring any part of a circle.
Flat-bladed Spade Drill Bit - --Answer --This bit is also used in wood. The
bit size is measured by the spade's diameter, which ranges from 1/2 to 1 1/2
inches.
Masonry Drill Bit - --Answer --This bit which has a carbide tip, is used in
concrete, stone, slate, and ceramic.
Hammer Drill Bits - --Answer --These drill bits can take more of a
pounding.
Auger Drill Bit - --Answer --This bit is used for drilling wood and other soft
materials, but not for drilling metal. As a rule, the point of a bit should be sharper
for softer materials than for harder ones.
....COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED...TRUSTED & VERIFIED 2
