AMT 287 – Test #1 Review Guide with 100+ Verified Q&A | Aircraft Engines, Propellers, Lubrication Systems & Components

AMT 287 Test #1 Review questions with accurate
answers
4-Stroke Cycle Ans✓✓✓ 1. Intake
2. Compression
3. Power/Combustion
4. Exhaust


4-Stroke Cycle Ans✓✓✓ 1. Intake
2. Compression
3. Power/Combustion
4. Exhaust


Accessory Section Ans✓✓✓ Mounts for magnetos, pumps, generators


Alternate Induction Air Ans✓✓✓ Provides hot air


Angle of Attack Ans✓✓✓ The angle between the chord of the element
and the relative wind


Anti-friction Bearing Ans✓✓✓ Uses balls or rollers to avoid a sliding
action between the bearing surfaces.


Bearings Ans✓✓✓ any surface that supports or is supported by another
surface

, Beta Control Ans✓✓✓ A propeller which allows the manual
repositioning of the propeller blade angle beyond the normal low pitch
stop


Blade Angle Ans✓✓✓ The angel of the chord line of the airfoil makes
with the propeller's rotation plan and is expressed in degrees


Blade Face Ans✓✓✓ The surface of the propeller blade that
corresponds to the lower surface of an airfoil


Blade Shank (root) Ans✓✓✓ The section of the blade nearest to the hub


Blade Tip Ans✓✓✓ The outer end of the blade furthest from the hub


Brake Horsepower (BHP) Ans✓✓✓ That which an engine is capable of
transmitting to a propeller or other mechanism


Carburetor Ans✓✓✓ a device that blends air and fuel for most older
cars (pre-1990). As air moves quickly through the _____, it creates a
vacuum, which draws more and more fuel into the mixture


Chapter 3 Ans✓✓✓ -


Chapter 4 Ans✓✓✓ -