TCFP Prep Newest Version 2025/2026 Actual Questions and
Answers 100% Correct.
About How Much Of A B. 25-30%
Kernmantle Rope's
Strength Is Provided By The
Mantle
A. 10-15%
B. 25-30%
C. 45-50%
D. 60-75%
According To Statistics C. 70,000-100,000
Compiled By The
USFA Approx Firefighter
Injuries Are
Reported Each Yea.
A. 1,000-3,000
B. 10,000-20,000
C. 70,000-100,000
D. More Than 1,000,000
The Acronym For The 4- A. PASS
Step Process For Proper
Use Of A Fire
Extinguishers Is
a. PASS
b. RACE
c. PACE
d. DUMP
An Advantage Of A Face- B. Helps Control Internal Fogging
Piece Nose-Cup Is That It
a. Assist In Communication
b. Helps Control Internal
Fogging
c. Increases User Time
d. Makes Breathing Easier
,AFFF Extinguishers Are B. Class A & B
Suitable For Use On
_ Fires
a. Class B & C
b. Class A & B
c. Class D
d. Class A, B, And C
AFFF Extinguishing Agents C. Both Class A And B
Are Applicable To Fires
a. Class C
b. Class D
c. Both Class A And B
d. Class A,B, And C
The AFFF Portable C. Compressed Air
Extinguishers Use What
Means For Expelling Their
Contents
a. Springs
b. Vacuum
c. Compressed Air
d. Gravity
After Removing The Lock C. Key Tool
Cylinder, The Firefighter
Must Use A
a. Rotary Saw To Cut Lock
Mechanism
b. Hydraulic Spreader To
Remove The Lock
c. Key Tool
d. C Tool
,All F.D. Radio Operations C. FCC
Must Follow Rules Of The ?
a. NFPA
b. Dot
c. FCC
d. Code Of Federal
Regulations
All SCBA Should Be C. After Each Use
Inspected
a. Bi-Weekly
b. Quarterly
c. After Each Use
d. Semi-Anually
The Amount Of Heat B. Heat Release Rate
Energy Released Per Unit
Of Time As A Given Fuel
Burns Is Called
a. Ignition Rate
b. Heat Release Rate
c. Heat Energy Rate
d. Rate Of Combustion
The Application Of A Safety A. Finish The Other Basic Knots
Knot Is To
a. Finish The Other Basic Knots
b. Keep A Rope From
Running Completely
Through The Pulley Or
Eye
c. Form A Loop That Does Not
Tighten
d. Connect Two Ropes
Together
, As It Applies To Hazardous D. Keeping Responders And The Public A Safe Distance Away
Materials Response Strategy, From The Hazard
What Does The Term
"Isolation" Mean?
A. Taking Steps To Control
The Direction Of A
Material Release And
Minimize Downwind
Exposures
B. Use Of Appropriate
Personal Protective
Equipment To Prevent
Direct Contact With The
Material
C. Preventing Spread Of A
Material Beyond A
Specified Zone Or
Perimeter
D. Keeping Responders
And The Public A Safe
Distance Away From
The Hazard
At A Hazardous Materials A. Control Zones
Incident, What Are The
Hot, Warm, And Cold
Zones?
A. Control Zones
B. Isolation Perimeters
C. Protective Action Distances
D. Groups Or Divisions
Answers 100% Correct.
About How Much Of A B. 25-30%
Kernmantle Rope's
Strength Is Provided By The
Mantle
A. 10-15%
B. 25-30%
C. 45-50%
D. 60-75%
According To Statistics C. 70,000-100,000
Compiled By The
USFA Approx Firefighter
Injuries Are
Reported Each Yea.
A. 1,000-3,000
B. 10,000-20,000
C. 70,000-100,000
D. More Than 1,000,000
The Acronym For The 4- A. PASS
Step Process For Proper
Use Of A Fire
Extinguishers Is
a. PASS
b. RACE
c. PACE
d. DUMP
An Advantage Of A Face- B. Helps Control Internal Fogging
Piece Nose-Cup Is That It
a. Assist In Communication
b. Helps Control Internal
Fogging
c. Increases User Time
d. Makes Breathing Easier
,AFFF Extinguishers Are B. Class A & B
Suitable For Use On
_ Fires
a. Class B & C
b. Class A & B
c. Class D
d. Class A, B, And C
AFFF Extinguishing Agents C. Both Class A And B
Are Applicable To Fires
a. Class C
b. Class D
c. Both Class A And B
d. Class A,B, And C
The AFFF Portable C. Compressed Air
Extinguishers Use What
Means For Expelling Their
Contents
a. Springs
b. Vacuum
c. Compressed Air
d. Gravity
After Removing The Lock C. Key Tool
Cylinder, The Firefighter
Must Use A
a. Rotary Saw To Cut Lock
Mechanism
b. Hydraulic Spreader To
Remove The Lock
c. Key Tool
d. C Tool
,All F.D. Radio Operations C. FCC
Must Follow Rules Of The ?
a. NFPA
b. Dot
c. FCC
d. Code Of Federal
Regulations
All SCBA Should Be C. After Each Use
Inspected
a. Bi-Weekly
b. Quarterly
c. After Each Use
d. Semi-Anually
The Amount Of Heat B. Heat Release Rate
Energy Released Per Unit
Of Time As A Given Fuel
Burns Is Called
a. Ignition Rate
b. Heat Release Rate
c. Heat Energy Rate
d. Rate Of Combustion
The Application Of A Safety A. Finish The Other Basic Knots
Knot Is To
a. Finish The Other Basic Knots
b. Keep A Rope From
Running Completely
Through The Pulley Or
Eye
c. Form A Loop That Does Not
Tighten
d. Connect Two Ropes
Together
, As It Applies To Hazardous D. Keeping Responders And The Public A Safe Distance Away
Materials Response Strategy, From The Hazard
What Does The Term
"Isolation" Mean?
A. Taking Steps To Control
The Direction Of A
Material Release And
Minimize Downwind
Exposures
B. Use Of Appropriate
Personal Protective
Equipment To Prevent
Direct Contact With The
Material
C. Preventing Spread Of A
Material Beyond A
Specified Zone Or
Perimeter
D. Keeping Responders
And The Public A Safe
Distance Away From
The Hazard
At A Hazardous Materials A. Control Zones
Incident, What Are The
Hot, Warm, And Cold
Zones?
A. Control Zones
B. Isolation Perimeters
C. Protective Action Distances
D. Groups Or Divisions
