EPA 608 Type 3 exam with 100%
Complete Solutions (Latest
2024/2025)
Save
Warm up with practice questions
Learn
Studied 7 terms
Nice work, you're crushing it
Continue studying in Learn
,Terms in this set (139)
On low air leaks from areas with gaskets or
pressure fittings
chillers,
moisture
typically enters
the refrigerant
system through
The maximum 10 psig
test pressure for
leak testing a
low pressure
centrifugal is:
Leak test and ...
repair the chiller
to reduce
refrigerant loss
from a pruge
unit on CFC-11
chiller
,A hydrostatic determine if a tube leaks
tube test kit is
used to:
Commercial 35%
and industrial
process
refrigeration
systems must
be repaired
when the leak
rate exceeds
____ of the
charge per
year.
Refrigerant ...
recovery
typically start
with liquid
recovery it is
faster.
, A rupture disc 15 psig
on a recovery
vessel for a low
pressure
refrigerants
relieves at:
According to 2.5 mm Hg
ASHRAE
Guideline 3-
1996, if the
pressure in a
system rises
from 1 mm Hg
to a level above
____ during a
standing
vacuum test,
the system
should be
checked for
leaks.
Complete Solutions (Latest
2024/2025)
Save
Warm up with practice questions
Learn
Studied 7 terms
Nice work, you're crushing it
Continue studying in Learn
,Terms in this set (139)
On low air leaks from areas with gaskets or
pressure fittings
chillers,
moisture
typically enters
the refrigerant
system through
The maximum 10 psig
test pressure for
leak testing a
low pressure
centrifugal is:
Leak test and ...
repair the chiller
to reduce
refrigerant loss
from a pruge
unit on CFC-11
chiller
,A hydrostatic determine if a tube leaks
tube test kit is
used to:
Commercial 35%
and industrial
process
refrigeration
systems must
be repaired
when the leak
rate exceeds
____ of the
charge per
year.
Refrigerant ...
recovery
typically start
with liquid
recovery it is
faster.
, A rupture disc 15 psig
on a recovery
vessel for a low
pressure
refrigerants
relieves at:
According to 2.5 mm Hg
ASHRAE
Guideline 3-
1996, if the
pressure in a
system rises
from 1 mm Hg
to a level above
____ during a
standing
vacuum test,
the system
should be
checked for
leaks.
