FLUID LINES AND FITTINGS (FLUID
LINES AND FITTINGS) QUESTIONS WITH
PASSED SOLUTIONS!!
1 of 89
Term
Aircraft fluid lines are usually made of ________ or_.
Give this one a try later!
wooden pipes, rubber bands plastic tubing, rigid pipe
metal tubing, flexible hose glass tubes, paper straws
, Don't know?
2 of 89
Term
When replacing rigid tubing, the new line's layout should always be
checked for what?
Give this one a try later!
Ensure that the layout of
the new line is the same as Verify the color of the tubing
the old line. matches.
Check the length of the new tubing
Make sure the new line is longer. only.
Don't know?
3 of 89
Term
A scratch or nick in aluminum tubing can be repaired provided
it does not____.
Give this one a try later!
, occur anywhere along the tubing appear in the heel of a bend
be less than 1 inch long be visible from a distance
Don't know?
4 of 89
Term
Which tubings have the characteristics (high strength, abrasion
resistance) necessary for use in a high-pressure (3,000 PSI) hydraulic
system for operation of landing gear and flaps?
Give this one a try later!
Plastic tubing with low
pressure rating Aluminum tubing with low strength
Corrosion resistant steel
annealed or 1/4H Copper tubing with high flexibility
Don't know?
, 5 of 89
Term
MS flareless fittings cannot be used on aircraft. (True or False)
Give this one a try later!
False True
black, blue Neoprene
Don't know?
6 of 89
Term
All tubing is pressure tested prior to ________ and is_________withstand
several times operating pressure.
Give this one a try later!
initial installation, pressure
temporary setup, loosely fitted tested
routine maintenance,
cleaned thoroughly final inspection, visually checked
LINES AND FITTINGS) QUESTIONS WITH
PASSED SOLUTIONS!!
1 of 89
Term
Aircraft fluid lines are usually made of ________ or_.
Give this one a try later!
wooden pipes, rubber bands plastic tubing, rigid pipe
metal tubing, flexible hose glass tubes, paper straws
, Don't know?
2 of 89
Term
When replacing rigid tubing, the new line's layout should always be
checked for what?
Give this one a try later!
Ensure that the layout of
the new line is the same as Verify the color of the tubing
the old line. matches.
Check the length of the new tubing
Make sure the new line is longer. only.
Don't know?
3 of 89
Term
A scratch or nick in aluminum tubing can be repaired provided
it does not____.
Give this one a try later!
, occur anywhere along the tubing appear in the heel of a bend
be less than 1 inch long be visible from a distance
Don't know?
4 of 89
Term
Which tubings have the characteristics (high strength, abrasion
resistance) necessary for use in a high-pressure (3,000 PSI) hydraulic
system for operation of landing gear and flaps?
Give this one a try later!
Plastic tubing with low
pressure rating Aluminum tubing with low strength
Corrosion resistant steel
annealed or 1/4H Copper tubing with high flexibility
Don't know?
, 5 of 89
Term
MS flareless fittings cannot be used on aircraft. (True or False)
Give this one a try later!
False True
black, blue Neoprene
Don't know?
6 of 89
Term
All tubing is pressure tested prior to ________ and is_________withstand
several times operating pressure.
Give this one a try later!
initial installation, pressure
temporary setup, loosely fitted tested
routine maintenance,
cleaned thoroughly final inspection, visually checked
