NFPA 70 National Electrical Code
Exam 2025 Questions and Answers
Table 314.16(B) - ....ANSWER☑️☑️...-Volume Allowance Required per Conductor
392.22 - ....ANSWER☑️☑️...-Cable tray fill
404.14 - ....ANSWER☑️☑️...-Rating and use of switches
Table 314.16(A) - ....ANSWER☑️☑️...-Box Volume metal boxes
What code section for Conductors in Parallel? - ....ANSWER☑️☑️...-310.10(G)
The length of free conductors at outlets, junctions and switch points? (Code
section?) - ....ANSWER☑️☑️...-300.14 At least 150mm (6in)
Article 230 - ....ANSWER☑️☑️...-Services
RPM formula? - ....ANSWER☑️☑️...-120 x Frequency (Hz) divided by number of
poles
Voltage drop formula - ....ANSWER☑️☑️...-2(K)(I)(D) divided by CM
K = direct current constant, copper (12.9 ohm), aluminum (21.2 ohm)
I = amps, current
D = length of conductors
CM = area in circular mils per ch.9 table
When cable or raceway type wiring methods are installed through bored holes in
framing members, they are required to be not less than _____ inches from the
nearest edge. - ....ANSWER☑️☑️...-1 1/4 inches 300.4(A)(1)
…FOR STUDY PURPOSES ONLY…©️ 2025 ALL RIGHTS RESERVED… 1
Exam 2025 Questions and Answers
Table 314.16(B) - ....ANSWER☑️☑️...-Volume Allowance Required per Conductor
392.22 - ....ANSWER☑️☑️...-Cable tray fill
404.14 - ....ANSWER☑️☑️...-Rating and use of switches
Table 314.16(A) - ....ANSWER☑️☑️...-Box Volume metal boxes
What code section for Conductors in Parallel? - ....ANSWER☑️☑️...-310.10(G)
The length of free conductors at outlets, junctions and switch points? (Code
section?) - ....ANSWER☑️☑️...-300.14 At least 150mm (6in)
Article 230 - ....ANSWER☑️☑️...-Services
RPM formula? - ....ANSWER☑️☑️...-120 x Frequency (Hz) divided by number of
poles
Voltage drop formula - ....ANSWER☑️☑️...-2(K)(I)(D) divided by CM
K = direct current constant, copper (12.9 ohm), aluminum (21.2 ohm)
I = amps, current
D = length of conductors
CM = area in circular mils per ch.9 table
When cable or raceway type wiring methods are installed through bored holes in
framing members, they are required to be not less than _____ inches from the
nearest edge. - ....ANSWER☑️☑️...-1 1/4 inches 300.4(A)(1)
…FOR STUDY PURPOSES ONLY…©️ 2025 ALL RIGHTS RESERVED… 1