6/16/25, 11:39 AM NCCER Module 26204-17 Conduit bending COMPREHENSIVE questions answered, 2025 verified graded A+ already passed! Fla…
NCCER Module 26204-17 Conduit bending
COMPREHENSIVE questions answered, 2025
verified graded A+ already passed!
Save
Terms in this set (48)
must be included when calculating degrees between
Offsets and Saddles
pull points
To make matching bends use the larger size for both conduits
in different size conduit
using a mechanical
bender
To prevent flattening plugs and air pressure
when bending larger
diameter PVC conduit, use
A saddle bend is counted 60 to 180-degrees of bend, depending on the type of
as bends
You are making a 20-inch 40
offset with two 30 degree
bends. The distance
between bends is _________
inches.
One method of bending the amount of travel method to monitor each bend
segments is to use _______.
The minimum bending 13 inches
radius for 3 in RMC is
https://quizlet.com/1054668167/nccer-module-26204-17-conduit-bending-comprehensive-questions-answered-2025-verified-graded-a-already-passed-… 1/6
, 6/16/25, 11:39 AM NCCER Module 26204-17 Conduit bending COMPREHENSIVE questions answered, 2025 verified graded A+ already passed! Fla…
A mechanical bender may 2" EMT
be used to make bends in
How do you find the Radius of inner pipe + OD of inner pipe + spacing
radius of the outer pipe in
a concentric bend?
A disadvantage of it is difficult to bend consistently and accurately
aluminum conduit is that
in order to make a 90 spring-back
degree bend in RMC, the
conduit is bent to 95
degrees to account for
An important safety provide proper ventilation to carry off fumes from the
precaution to use when joint cement
working with PVC conduit
is to
A saddle to cross a single three
pipe typically requires
____________ bends.
The minimum bending 4
radius for 1/2" rigid conduit
is __________ inches.
The reason for making a cross an obstacle
saddle bend in a run of
conduit is to
________________________.
A bend used for a change kick
in direction of less than
90o is called a(n)
________________.
The equation used to C=2piR
calculate the
circumference of a circle
is
https://quizlet.com/1054668167/nccer-module-26204-17-conduit-bending-comprehensive-questions-answered-2025-verified-graded-a-already-passed-… 2/6
NCCER Module 26204-17 Conduit bending
COMPREHENSIVE questions answered, 2025
verified graded A+ already passed!
Save
Terms in this set (48)
must be included when calculating degrees between
Offsets and Saddles
pull points
To make matching bends use the larger size for both conduits
in different size conduit
using a mechanical
bender
To prevent flattening plugs and air pressure
when bending larger
diameter PVC conduit, use
A saddle bend is counted 60 to 180-degrees of bend, depending on the type of
as bends
You are making a 20-inch 40
offset with two 30 degree
bends. The distance
between bends is _________
inches.
One method of bending the amount of travel method to monitor each bend
segments is to use _______.
The minimum bending 13 inches
radius for 3 in RMC is
https://quizlet.com/1054668167/nccer-module-26204-17-conduit-bending-comprehensive-questions-answered-2025-verified-graded-a-already-passed-… 1/6
, 6/16/25, 11:39 AM NCCER Module 26204-17 Conduit bending COMPREHENSIVE questions answered, 2025 verified graded A+ already passed! Fla…
A mechanical bender may 2" EMT
be used to make bends in
How do you find the Radius of inner pipe + OD of inner pipe + spacing
radius of the outer pipe in
a concentric bend?
A disadvantage of it is difficult to bend consistently and accurately
aluminum conduit is that
in order to make a 90 spring-back
degree bend in RMC, the
conduit is bent to 95
degrees to account for
An important safety provide proper ventilation to carry off fumes from the
precaution to use when joint cement
working with PVC conduit
is to
A saddle to cross a single three
pipe typically requires
____________ bends.
The minimum bending 4
radius for 1/2" rigid conduit
is __________ inches.
The reason for making a cross an obstacle
saddle bend in a run of
conduit is to
________________________.
A bend used for a change kick
in direction of less than
90o is called a(n)
________________.
The equation used to C=2piR
calculate the
circumference of a circle
is
https://quizlet.com/1054668167/nccer-module-26204-17-conduit-bending-comprehensive-questions-answered-2025-verified-graded-a-already-passed-… 2/6
