NICET Level 1 Fire Alarm UPDATED
ACTUAL Exam Questions and CORRECT
Answers
OSHA - CORRECT ANSWER - The Occupational Safety and Health Act (OSH Act) is
the primary federal law which governs occupational health and safety in the private sector and
federal government in the United States. Its main goal is to ensure employers provide employees
with an environment free from recognized hazards, such as exposure to toxic chemicals,
excessive noise levels, mechanical dangers, heat or cold stress, or unsanitary conditions
OSHA 29 CFR, Part 1926. - CORRECT ANSWER - Ladders designed and built according
to ANSI 14.1-5 meet the requirements
The distance between the bottom of the ladder and the wall or support must be approximately
___ the length of the ladder - CORRECT ANSWER - 1/4
Wheel chocks shall be installed every time before an aerial lift is used true or false? - CORRECT
ANSWER - false
"Lockout/tagout" refers to specific - CORRECT ANSWER - practices and procedures to
safeguard employees from the unexpected energization or startup of machinery and equipment,
or the release of hazardous energy during service or maintenance activities.
Employers must establish a training and information program for employees who are exposed to
hazardous chemicals in their work area. How often must this occur? - CORRECT
ANSWER - -at the time of initial assignment
-whenever a new hazard is introduced into their work area
what code requires fire extinguisher to be provided 3000 ft2 in a protected building area -
CORRECT ANSWER - OSHA 1926.150
, personal safety is whos responsibility? - CORRECT ANSWER - your responsibly
A respirator is a device which removes solid particles from the air such as dust mold bacteria and
pollen - CORRECT ANSWER - False
The MSDS or SDS sheets given the following information for a chemical - CORRECT
ANSWER - Physical and chemical properties, physical and health hazards, emergency and
first aid procedures
Safety shoes for performing electrical work must be - CORRECT ANSWER -
Nonconductive
Class K fires are fire that involve - CORRECT ANSWER - Cooking appliances that
involve combustible cooking media (vegetable oil, animals oils and fats)
When using a ladder for electrical work which is correct - CORRECT ANSWER - Rails
must be non conductive
A ladder must be able to support what times the weight of the anticipated load - CORRECT
ANSWER - 3.3 times
When an employee may be exposed to hazardous chemicals when must training take place -
CORRECT ANSWER - When they might be subject to exposure and when new chemicals
are introduced to an employee work area
Protective gloves are worn when - CORRECT ANSWER - When working with metal
stampings or 10 for the sharp edges or splinters involved and when dealing with elevated
temperatures of materials and equipment
What type of fire extinguisher would you use for a fire when combustible metals such as lithium
or titanium - CORRECT ANSWER - Class D
ACTUAL Exam Questions and CORRECT
Answers
OSHA - CORRECT ANSWER - The Occupational Safety and Health Act (OSH Act) is
the primary federal law which governs occupational health and safety in the private sector and
federal government in the United States. Its main goal is to ensure employers provide employees
with an environment free from recognized hazards, such as exposure to toxic chemicals,
excessive noise levels, mechanical dangers, heat or cold stress, or unsanitary conditions
OSHA 29 CFR, Part 1926. - CORRECT ANSWER - Ladders designed and built according
to ANSI 14.1-5 meet the requirements
The distance between the bottom of the ladder and the wall or support must be approximately
___ the length of the ladder - CORRECT ANSWER - 1/4
Wheel chocks shall be installed every time before an aerial lift is used true or false? - CORRECT
ANSWER - false
"Lockout/tagout" refers to specific - CORRECT ANSWER - practices and procedures to
safeguard employees from the unexpected energization or startup of machinery and equipment,
or the release of hazardous energy during service or maintenance activities.
Employers must establish a training and information program for employees who are exposed to
hazardous chemicals in their work area. How often must this occur? - CORRECT
ANSWER - -at the time of initial assignment
-whenever a new hazard is introduced into their work area
what code requires fire extinguisher to be provided 3000 ft2 in a protected building area -
CORRECT ANSWER - OSHA 1926.150
, personal safety is whos responsibility? - CORRECT ANSWER - your responsibly
A respirator is a device which removes solid particles from the air such as dust mold bacteria and
pollen - CORRECT ANSWER - False
The MSDS or SDS sheets given the following information for a chemical - CORRECT
ANSWER - Physical and chemical properties, physical and health hazards, emergency and
first aid procedures
Safety shoes for performing electrical work must be - CORRECT ANSWER -
Nonconductive
Class K fires are fire that involve - CORRECT ANSWER - Cooking appliances that
involve combustible cooking media (vegetable oil, animals oils and fats)
When using a ladder for electrical work which is correct - CORRECT ANSWER - Rails
must be non conductive
A ladder must be able to support what times the weight of the anticipated load - CORRECT
ANSWER - 3.3 times
When an employee may be exposed to hazardous chemicals when must training take place -
CORRECT ANSWER - When they might be subject to exposure and when new chemicals
are introduced to an employee work area
Protective gloves are worn when - CORRECT ANSWER - When working with metal
stampings or 10 for the sharp edges or splinters involved and when dealing with elevated
temperatures of materials and equipment
What type of fire extinguisher would you use for a fire when combustible metals such as lithium
or titanium - CORRECT ANSWER - Class D
