Level 2 Dante Operations Test Comprehensive Questions (Frequently Tested) with Verified Answers.

Level 2 Dante Operations Test
Comprehensive Questions
(Frequently Tested) with
Verified Answers.
Connect the Dante chipsets with the maximum number of audio channels they support:



Dante AV



Ultimo-X



PCIe Card



HC and IP Core



Broadway



Brooklyn II - Answer: -64x64



-512x512



-4x0, 2x2, 0x4



-16x16



-8x8



-128x128

, What protocol does Dante for clocking? - Answer: A. NTP

B. PTP

C. SMPTE Time Code



As a simple rule of thumb, how much latency should be allowed per network switch hop? - Answer: A.
0.001 msec (1 microsecond)



B. 0.01 msec (10 microseconds)



C. 0.1 msec (100

microseconds)



D. 1.0 msec



If a transmitting device runs out of flows, what should you do to enable all subscriptions to be made? -
Answer: A. Get a managed switch with Packet Propagation Protocol (PPP) to duplicate a stream with
new destination IP addresses.



B. Flip stream(s) to unicast so it only takes one flow for multiple destinations.



C. Flip stream(s) to multicast so it only takes one flow for multiple destinations.



D. Add a Dante AVIO "repeater" module, which will accept a stream and retransmit it with up to 32
more streams.



The redundant port allows for a second network connection in case the first fails. Which describes the
operation? - Answer: A. Primary and secondary can be connected in the same broadcast domain (VLAN).
If one cable fails, the other will take over.