SACA c201 Electrical Systems
Certification Study Guide (2025)
ACTUAL EXAM comprehensive
questions and verified accurate
solution (detailed & elaborated)
2025 TEST!!
Save
Terms in this set (91)
, a ground is a point in the circuit
that is connected to the earth. you
can you define can use a multimeter-If the
and test a resistance is too high, it may
ground? indicate that the ground
connection is not providing
adequate protection
1.Always use a circuit tester or
electrical safety voltage detector to check that a
rules circuit is de-energized before
working on it.
Never touch electrical wiring or
electrical safety
equipment with wet hands or while
rule
standing on a wet surface.
Do not operate electrical
electrical safety
equipment that is damaged, frayed,
rule
or otherwise in poor condition.
Use the correct fuse or circuit
electrical safety
breaker for the circuit you are
rule
working on.
electrical safety Never remove or bypass the
rule grounding prong on a plug.
, Do not use extension cords or
multiple outlet adapters that are
Electrical Safety
not rated for the equipment you
are using.
Do not overload circuits by
electrical safety plugging in too many devices or
using high-powered equipment.
Do not use electrical equipment in
wet or damp conditions unless it is
electrical safety
specifically designed for that
purpose.
Use properly rated and properly
electrical safety installed surge protectors for
sensitive electronic equipment.
Always follow the manufacturer's
electrical safety instructions for using electrical
equipment.
to prevent unexpected
purpose of energization or startup of
lockout tag out machinery or equipment while it is
being serviced or repaired.
Certification Study Guide (2025)
ACTUAL EXAM comprehensive
questions and verified accurate
solution (detailed & elaborated)
2025 TEST!!
Save
Terms in this set (91)
, a ground is a point in the circuit
that is connected to the earth. you
can you define can use a multimeter-If the
and test a resistance is too high, it may
ground? indicate that the ground
connection is not providing
adequate protection
1.Always use a circuit tester or
electrical safety voltage detector to check that a
rules circuit is de-energized before
working on it.
Never touch electrical wiring or
electrical safety
equipment with wet hands or while
rule
standing on a wet surface.
Do not operate electrical
electrical safety
equipment that is damaged, frayed,
rule
or otherwise in poor condition.
Use the correct fuse or circuit
electrical safety
breaker for the circuit you are
rule
working on.
electrical safety Never remove or bypass the
rule grounding prong on a plug.
, Do not use extension cords or
multiple outlet adapters that are
Electrical Safety
not rated for the equipment you
are using.
Do not overload circuits by
electrical safety plugging in too many devices or
using high-powered equipment.
Do not use electrical equipment in
wet or damp conditions unless it is
electrical safety
specifically designed for that
purpose.
Use properly rated and properly
electrical safety installed surge protectors for
sensitive electronic equipment.
Always follow the manufacturer's
electrical safety instructions for using electrical
equipment.
to prevent unexpected
purpose of energization or startup of
lockout tag out machinery or equipment while it is
being serviced or repaired.
