F-60 FIRE GUARD NEWEST VERSION
2025 Study Guide Questions and Verified
Answers | 100% Correct
Paper, wood shavings, straw and fabric are examples of
________________________ <<<answer>>>>combustible materials
Hot work operations involving cutting or welding shall be conducted at least
__________________ from combustible materials and combustible waste
<<<answer>>>>35 feet
____________________ shall not be allowed to accumulate on floors and other
surfaces within the hot work area. <<<answer>>>>Combustible waste
Prohibited cutting or welding when ________________________
<<<answer>>>>supported by or resting on any compressed gs containers
Compressed gas containers must be replaced when __________________
<<<answer>>>>They are empty
, Empty containers must be handle in the same manners as __________________
<<<answer>>>>full once
A ________________ must not be rolled on its side or its rim
<<<answer>>>>Compressed gas containers
Fire Watch Requirement <<<answer>>>>A fire watch must be maintained
during any hot work operation
Person conducting a fire watch ______________ <<<answer>>>>shall not have
other duties
Fire Guard vs Fire Watch <<<answer>>>>-important to understand the code
required distinction between fire watch and a fire guard-not all individuals
responsible to maintain a fire watch must possess an f-60 certificate of fitness
Under Fire watch at least once portable fire extinguisher with minimum
_______________ rating must be readily available within __________ feet travel
distance of the location <<<answer>>>>2-A:20-B:C, 30 feet
Under fire watch torch applied roof systems, a minimum _____________ rating
fire extinguisher readily available <<<answer>>>>3-A 40-B:C
Torch Applied Roof-System <<<answer>>>>Bituminous roofing systems using
membranes that are adhered by heating with a torch and melting asphalt back
coating instead of mopping hot asphalt for adhesion.
2025 Study Guide Questions and Verified
Answers | 100% Correct
Paper, wood shavings, straw and fabric are examples of
________________________ <<<answer>>>>combustible materials
Hot work operations involving cutting or welding shall be conducted at least
__________________ from combustible materials and combustible waste
<<<answer>>>>35 feet
____________________ shall not be allowed to accumulate on floors and other
surfaces within the hot work area. <<<answer>>>>Combustible waste
Prohibited cutting or welding when ________________________
<<<answer>>>>supported by or resting on any compressed gs containers
Compressed gas containers must be replaced when __________________
<<<answer>>>>They are empty
, Empty containers must be handle in the same manners as __________________
<<<answer>>>>full once
A ________________ must not be rolled on its side or its rim
<<<answer>>>>Compressed gas containers
Fire Watch Requirement <<<answer>>>>A fire watch must be maintained
during any hot work operation
Person conducting a fire watch ______________ <<<answer>>>>shall not have
other duties
Fire Guard vs Fire Watch <<<answer>>>>-important to understand the code
required distinction between fire watch and a fire guard-not all individuals
responsible to maintain a fire watch must possess an f-60 certificate of fitness
Under Fire watch at least once portable fire extinguisher with minimum
_______________ rating must be readily available within __________ feet travel
distance of the location <<<answer>>>>2-A:20-B:C, 30 feet
Under fire watch torch applied roof systems, a minimum _____________ rating
fire extinguisher readily available <<<answer>>>>3-A 40-B:C
Torch Applied Roof-System <<<answer>>>>Bituminous roofing systems using
membranes that are adhered by heating with a torch and melting asphalt back
coating instead of mopping hot asphalt for adhesion.
