TESTOUT PC PRO CERTIFICATION PRACTICE EXAM NEWEST
ACTUAL 2025/2026 WITH COMPLETE QUESTIONS & ANSWERS
VERIFIED/GRADED A +
What is the IPv4 address of the workstation?
169.254.201.11
What is the subnet mask?
255.255.0.0
How did the computer get its IP configuration information?
APIPA
What type of Internet access would this computer have?
No access - -----Answers---You can use the ipconfig
command to find the IP address and subnet mask. You will
need to use ipconfig /all to find additional information, such as
whether the computer got addressing information from a
DHCP server or not.
In this scenario, the computer is configured to get information
from a DHCP server (DHCP Enabled = Yes), but the DHCP
server line is missing, meaning that the computer could not
contact a DHCP server. The Autoconfiguration Enabled line
indicates Yes, meaning that the computer will use APIPA if the
DHCP server is unavailable. An address beginning with
169.254.x.x with a mask of 255.255.0.0 indicates that the
computer used APIPA to assign itself an IP address.
,Because the computer does not have a default gateway
address, it will be unable to communicate on the Internet.
Communications will be limited to the local subnet only.
You are the IT administrator for a small corporate network.
The receptionist, Maggie Brown, uses an iPad to manage
employee schedules and messages. You need to help her
make the iPad more secure. The current simple passcode is
1542.
In this lab, your task is to complete the following:
Set a secure passcode on the iPad:
Require a passcode: After 5 minutes
New passcode: KeepOutOfMyPad
Configure the iPad to erase data after 10 failed passcode
attempts. - -----Answers---Set a secure Passcode on the
iPad as follows:
Select Settings.
From the left menu, select Touch ID & Passcode.
Enter 1542 for the passcode.
Select Require Passcode
Select After 5 minutes.
At the top, select Passcode Lock.
Next to Simple Passcode, click the switch to turn off simple
passcodes.
Enter 1542 for the passcode.
, Enter KeepOutOfMyPad as the new passcode.
Select Next.
Enter KeepOutOfMyPad to re-enter the new passcode.
Click Done.
Configure the iPad to Erase Data after 10 failed passcode
attempts as follows:
On the Touch ID & Passcode page next to Erase Data, click the
switch to enable Erase Data.
Click Enable.
You are the IT administrator for a small corporate network.
The employee in Office 2 is setting up a virtualization
environment for software development. To make the system
easier to use, she has requested dual monitors. You need to
upgrade the computer in Office 2 to support dual monitors. You
have purchased a second monitor and placed it in the
Workspace (the monitor on the left). The video card in the
computer currently only supports a single monitor, so you will
need to upgrade the video card to support dual monitors.
In this lab, your task is to configure dual monitors as follows:
Select and install a video card that provides you with dual
monitor support for both monitors using a digital connection to
the video card. When installing the video card, connect the
PCIe power connector to the video card.
Connect the left monitor to the newly installed video card
using an HDMI cable. The new monitor is already plugg - -----
Answers---Select and install the video card as follows:
ACTUAL 2025/2026 WITH COMPLETE QUESTIONS & ANSWERS
VERIFIED/GRADED A +
What is the IPv4 address of the workstation?
169.254.201.11
What is the subnet mask?
255.255.0.0
How did the computer get its IP configuration information?
APIPA
What type of Internet access would this computer have?
No access - -----Answers---You can use the ipconfig
command to find the IP address and subnet mask. You will
need to use ipconfig /all to find additional information, such as
whether the computer got addressing information from a
DHCP server or not.
In this scenario, the computer is configured to get information
from a DHCP server (DHCP Enabled = Yes), but the DHCP
server line is missing, meaning that the computer could not
contact a DHCP server. The Autoconfiguration Enabled line
indicates Yes, meaning that the computer will use APIPA if the
DHCP server is unavailable. An address beginning with
169.254.x.x with a mask of 255.255.0.0 indicates that the
computer used APIPA to assign itself an IP address.
,Because the computer does not have a default gateway
address, it will be unable to communicate on the Internet.
Communications will be limited to the local subnet only.
You are the IT administrator for a small corporate network.
The receptionist, Maggie Brown, uses an iPad to manage
employee schedules and messages. You need to help her
make the iPad more secure. The current simple passcode is
1542.
In this lab, your task is to complete the following:
Set a secure passcode on the iPad:
Require a passcode: After 5 minutes
New passcode: KeepOutOfMyPad
Configure the iPad to erase data after 10 failed passcode
attempts. - -----Answers---Set a secure Passcode on the
iPad as follows:
Select Settings.
From the left menu, select Touch ID & Passcode.
Enter 1542 for the passcode.
Select Require Passcode
Select After 5 minutes.
At the top, select Passcode Lock.
Next to Simple Passcode, click the switch to turn off simple
passcodes.
Enter 1542 for the passcode.
, Enter KeepOutOfMyPad as the new passcode.
Select Next.
Enter KeepOutOfMyPad to re-enter the new passcode.
Click Done.
Configure the iPad to Erase Data after 10 failed passcode
attempts as follows:
On the Touch ID & Passcode page next to Erase Data, click the
switch to enable Erase Data.
Click Enable.
You are the IT administrator for a small corporate network.
The employee in Office 2 is setting up a virtualization
environment for software development. To make the system
easier to use, she has requested dual monitors. You need to
upgrade the computer in Office 2 to support dual monitors. You
have purchased a second monitor and placed it in the
Workspace (the monitor on the left). The video card in the
computer currently only supports a single monitor, so you will
need to upgrade the video card to support dual monitors.
In this lab, your task is to configure dual monitors as follows:
Select and install a video card that provides you with dual
monitor support for both monitors using a digital connection to
the video card. When installing the video card, connect the
PCIe power connector to the video card.
Connect the left monitor to the newly installed video card
using an HDMI cable. The new monitor is already plugg - -----
Answers---Select and install the video card as follows:
